[PATCH v2 11/11] spi: spi-ep93xx: use master->cur_msg for in-flight message
From: H Hartley Sweeten
Date: Mon Jul 08 2013 - 12:25:26 EST
Instead of carrying the in-flight message in the driver private
data, use the cur_msg pointer that is already setup by the core.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ryan Mallon <rmallon@xxxxxxxxx>
Cc: Mika Westerberg <mika.westerberg@xxxxxx>
Cc: Mark Brown <broonie@xxxxxxxxxx>
Cc: Grant Likely <grant.likely@xxxxxxxxxx>
---
drivers/spi/spi-ep93xx.c | 88 ++++++++++++++++++++++++++----------------------
1 file changed, 48 insertions(+), 40 deletions(-)
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index 4c9a50c..e85834d 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -76,7 +76,6 @@
* @min_rate: minimum clock rate (in Hz) supported by the controller
* @max_rate: maximum clock rate (in Hz) supported by the controller
* @wait: wait here until given transfer is completed
- * @current_msg: message that is currently processed (or %NULL if none)
* @tx: current byte in transfer to transmit
* @rx: current byte in transfer to receive
* @fifo_level: how full is FIFO (%0..%SPI_FIFO_SIZE - %1). Receiving one
@@ -98,7 +97,6 @@ struct ep93xx_spi {
unsigned long min_rate;
unsigned long max_rate;
struct completion wait;
- struct spi_message *current_msg;
size_t tx;
size_t rx;
size_t fifo_level;
@@ -378,7 +376,7 @@ static void ep93xx_do_read(struct ep93xx_spi *espi, struct spi_transfer *t)
/**
* ep93xx_spi_read_write() - perform next RX/TX transfer
- * @espi: ep93xx SPI controller struct
+ * @master: spi_master struct
*
* This function transfers next bytes (or half-words) to/from RX/TX FIFOs. If
* called several times, the whole transfer will be completed. Returns
@@ -387,9 +385,10 @@ static void ep93xx_do_read(struct ep93xx_spi *espi, struct spi_transfer *t)
* When this function is finished, RX FIFO should be empty and TX FIFO should be
* full.
*/
-static int ep93xx_spi_read_write(struct ep93xx_spi *espi)
+static int ep93xx_spi_read_write(struct spi_master *master)
{
- struct spi_message *msg = espi->current_msg;
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
+ struct spi_message *msg = master->cur_msg;
struct spi_transfer *t = msg->state;
/* read as long as RX FIFO has frames in it */
@@ -410,13 +409,15 @@ static int ep93xx_spi_read_write(struct ep93xx_spi *espi)
return -EINPROGRESS;
}
-static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi)
+static void ep93xx_spi_pio_transfer(struct spi_master *master)
{
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
+
/*
* Now everything is set up for the current transfer. We prime the TX
* FIFO, enable interrupts, and wait for the transfer to complete.
*/
- if (ep93xx_spi_read_write(espi)) {
+ if (ep93xx_spi_read_write(master)) {
ep93xx_spi_enable_interrupts(espi);
wait_for_completion(&espi->wait);
}
@@ -424,7 +425,7 @@ static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi)
/**
* ep93xx_spi_dma_prepare() - prepares a DMA transfer
- * @espi: ep93xx SPI controller struct
+ * @master: spi_master struct
* @dir: DMA transfer direction
*
* Function configures the DMA, maps the buffer and prepares the DMA
@@ -432,9 +433,11 @@ static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi)
* in case of failure.
*/
static struct dma_async_tx_descriptor *
-ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir)
+ep93xx_spi_dma_prepare(struct spi_master *master,
+ enum dma_transfer_direction dir)
{
- struct spi_transfer *t = espi->current_msg->state;
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
+ struct spi_transfer *t = master->cur_msg->state;
struct dma_async_tx_descriptor *txd;
enum dma_slave_buswidth buswidth;
struct dma_slave_config conf;
@@ -527,15 +530,16 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir)
/**
* ep93xx_spi_dma_finish() - finishes with a DMA transfer
- * @espi: ep93xx SPI controller struct
+ * @master: spi_master struct
* @dir: DMA transfer direction
*
* Function finishes with the DMA transfer. After this, the DMA buffer is
* unmapped.
*/
-static void ep93xx_spi_dma_finish(struct ep93xx_spi *espi,
+static void ep93xx_spi_dma_finish(struct spi_master *master,
enum dma_transfer_direction dir)
{
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
struct dma_chan *chan;
struct sg_table *sgt;
@@ -555,21 +559,22 @@ static void ep93xx_spi_dma_callback(void *callback_param)
complete(callback_param);
}
-static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi)
+static void ep93xx_spi_dma_transfer(struct spi_master *master)
{
- struct spi_message *msg = espi->current_msg;
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
+ struct spi_message *msg = master->cur_msg;
struct dma_async_tx_descriptor *rxd, *txd;
- rxd = ep93xx_spi_dma_prepare(espi, DMA_DEV_TO_MEM);
+ rxd = ep93xx_spi_dma_prepare(master, DMA_DEV_TO_MEM);
if (IS_ERR(rxd)) {
dev_err(&espi->pdev->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd));
msg->status = PTR_ERR(rxd);
return;
}
- txd = ep93xx_spi_dma_prepare(espi, DMA_MEM_TO_DEV);
+ txd = ep93xx_spi_dma_prepare(master, DMA_MEM_TO_DEV);
if (IS_ERR(txd)) {
- ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM);
+ ep93xx_spi_dma_finish(master, DMA_DEV_TO_MEM);
dev_err(&espi->pdev->dev, "DMA TX failed: %ld\n", PTR_ERR(rxd));
msg->status = PTR_ERR(txd);
return;
@@ -588,13 +593,13 @@ static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi)
wait_for_completion(&espi->wait);
- ep93xx_spi_dma_finish(espi, DMA_MEM_TO_DEV);
- ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM);
+ ep93xx_spi_dma_finish(master, DMA_MEM_TO_DEV);
+ ep93xx_spi_dma_finish(master, DMA_DEV_TO_MEM);
}
/**
* ep93xx_spi_process_transfer() - processes one SPI transfer
- * @espi: ep93xx SPI controller struct
+ * @master: spi_master struct
* @msg: current message
* @t: transfer to process
*
@@ -602,10 +607,11 @@ static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi)
* transfer is complete (may sleep) and updates @msg->status based on whether
* transfer was successfully processed or not.
*/
-static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi,
+static void ep93xx_spi_process_transfer(struct spi_master *master,
struct spi_message *msg,
struct spi_transfer *t)
{
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
struct ep93xx_spi_chip *chip = spi_get_ctldata(msg->spi);
int err;
@@ -628,9 +634,9 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi,
* So in these cases we will be using PIO and don't bother for DMA.
*/
if (espi->dma_rx && t->len > SPI_FIFO_SIZE)
- ep93xx_spi_dma_transfer(espi);
+ ep93xx_spi_dma_transfer(master);
else
- ep93xx_spi_pio_transfer(espi);
+ ep93xx_spi_pio_transfer(master);
/*
* In case of error during transmit, we bail out from processing
@@ -665,7 +671,7 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi,
/*
* ep93xx_spi_process_message() - process one SPI message
- * @espi: ep93xx SPI controller struct
+ * @master: spi_master struct
* @msg: message to process
*
* This function processes a single SPI message. We go through all transfers in
@@ -675,9 +681,10 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi,
* @msg->status contains %0 in case of success or negative error code in case of
* failure.
*/
-static void ep93xx_spi_process_message(struct ep93xx_spi *espi,
+static void ep93xx_spi_process_message(struct spi_master *master,
struct spi_message *msg)
{
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
unsigned long timeout;
struct spi_transfer *t;
int err;
@@ -718,7 +725,7 @@ static void ep93xx_spi_process_message(struct ep93xx_spi *espi,
ep93xx_spi_cs_control(msg->spi, true);
list_for_each_entry(t, &msg->transfers, transfer_list) {
- ep93xx_spi_process_transfer(espi, msg, t);
+ ep93xx_spi_process_transfer(master, msg, t);
if (msg->status)
break;
}
@@ -747,9 +754,7 @@ static int ep93xx_spi_transfer_one_message(struct spi_master *master,
msg->status = 0;
msg->actual_length = 0;
- espi->current_msg = msg;
- ep93xx_spi_process_message(espi, msg);
- espi->current_msg = NULL;
+ ep93xx_spi_process_message(master, msg);
spi_finalize_current_message(master);
@@ -758,7 +763,8 @@ static int ep93xx_spi_transfer_one_message(struct spi_master *master,
static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id)
{
- struct ep93xx_spi *espi = dev_id;
+ struct spi_master *master = dev_id;
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
u8 irq_status = ep93xx_spi_read_u8(espi, SSPIIR);
/*
@@ -770,13 +776,13 @@ static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id)
ep93xx_spi_write_u8(espi, SSPICR, 0);
dev_warn(&espi->pdev->dev,
"receive overrun, aborting the message\n");
- espi->current_msg->status = -EIO;
+ master->cur_msg->status = -EIO;
} else {
/*
* Interrupt is either RX (RIS) or TX (TIS). For both cases we
* simply execute next data transfer.
*/
- if (ep93xx_spi_read_write(espi)) {
+ if (ep93xx_spi_read_write(master)) {
/*
* In normal case, there still is some processing left
* for current transfer. Let's wait for the next
@@ -805,8 +811,9 @@ static bool ep93xx_spi_dma_filter(struct dma_chan *chan, void *filter_param)
return true;
}
-static int ep93xx_spi_setup_dma(struct ep93xx_spi *espi)
+static int ep93xx_spi_setup_dma(struct spi_master *master)
{
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
dma_cap_mask_t mask;
int ret;
@@ -850,8 +857,10 @@ fail_free_page:
return ret;
}
-static void ep93xx_spi_release_dma(struct ep93xx_spi *espi)
+static void ep93xx_spi_release_dma(struct spi_master *master)
{
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
+
if (espi->dma_rx) {
dma_release_channel(espi->dma_rx);
sg_free_table(&espi->rx_sgt);
@@ -930,13 +939,13 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
}
error = devm_request_irq(&pdev->dev, irq, ep93xx_spi_interrupt,
- 0, "ep93xx-spi", espi);
+ 0, "ep93xx-spi", master);
if (error) {
dev_err(&pdev->dev, "failed to request irq\n");
goto fail_release_master;
}
- if (info->use_dma && ep93xx_spi_setup_dma(espi))
+ if (info->use_dma && ep93xx_spi_setup_dma(master))
dev_warn(&pdev->dev, "DMA setup failed. Falling back to PIO\n");
/* make sure that the hardware is disabled */
@@ -954,7 +963,7 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
return 0;
fail_free_dma:
- ep93xx_spi_release_dma(espi);
+ ep93xx_spi_release_dma(master);
fail_release_master:
spi_master_put(master);
@@ -964,11 +973,10 @@ fail_release_master:
static int ep93xx_spi_remove(struct platform_device *pdev)
{
struct spi_master *master = platform_get_drvdata(pdev);
- struct ep93xx_spi *espi = spi_master_get_devdata(master);
-
- ep93xx_spi_release_dma(espi);
+ ep93xx_spi_release_dma(master);
spi_unregister_master(master);
+
return 0;
}
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/