[PATCH v3 3/7] Documentation: DT: update atmel SSC with DMA binding

[Richard Genoud]

As atmel-ssc can be used with DMA, the documentation should be updated.
Also, a configuration DMA example is given.

Signed-off-by: Richard Genoud <richard.genoud@xxxxxxxxx>
---
 .../devicetree/bindings/misc/atmel-ssc.txt         |   24 ++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
index 38e51ad..96958ca 100644
--- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt
+++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
@@ -6,10 +6,30 @@ Required properties:
 	- atmel,at91sam9g45-ssc: support dma transfer
 - reg: Should contain SSC registers location and length
 - interrupts: Should contain SSC interrupt
+For dma transfer:
+- dmas: DMA specifier, consisting of a phandle to DMA controller node,
+  the memory interface and SSC DMA channel ID (for tx and rx).
+  See Documentation/devicetree/bindings/dma/atmel-dma.txt for details.
+- dma-names: Must be "tx", "rx".
 
-Example:
+
+Examples:
 ssc0: ssc@fffbc000 {
 	compatible = "atmel,at91rm9200-ssc";
 	reg = <0xfffbc000 0x4000>;
-	interrupts = <14 4 5>;
+	interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
 };
+
+
+ssc0: ssc@f0010000 {
+      compatible = "atmel,at91sam9g45-ssc";
+      reg = <0xf0010000 0x4000>;
+      interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+      dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>,
+	     <&dma0 1 AT91_DMA_CFG_PER_ID(14)>;
+      dma-names = "tx", "rx";
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+      status = "disabled";
+};
+
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/