[PATCH] mmc: dw_mmc: Handle DW_MCI_QUIRK_IDMAC_DTO properly

[Doug Anderson]

In (1fb5f68 mmc: dw_mmc: Don't loop when handling an interrupt), the
code for handling DW_MCI_QUIRK_IDMAC_DTO became dead code.  Move it to
where it ought to live.

Found by code inspection and compile-tested only--I don't know of any
boards that need DW_MCI_QUIRK_IDMAC_DTO.

Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
---
 drivers/mmc/host/dw_mmc.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index bc3a1bc..cdc0940 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1595,18 +1595,17 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 
 	pending = mci_readl(host, MINTSTS); /* read-only mask reg */
 
-	if (pending) {
-
-		/*
-		 * DTO fix - version 2.10a and below, and only if internal DMA
-		 * is configured.
-		 */
-		if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) {
-			if (!pending &&
-			    ((mci_readl(host, STATUS) >> 17) & 0x1fff))
-				pending |= SDMMC_INT_DATA_OVER;
-		}
+	/*
+	 * DTO fix - version 2.10a and below, and only if internal DMA
+	 * is configured.
+	 */
+	if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) {
+		if (!pending &&
+		    ((mci_readl(host, STATUS) >> 17) & 0x1fff))
+			pending |= SDMMC_INT_DATA_OVER;
+	}
 
+	if (pending) {
 		if (pending & DW_MCI_CMD_ERROR_FLAGS) {
 			mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS);
 			host->cmd_status = pending;
-- 
1.8.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/