RE: [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'

From: Neil Zhang
Date: Wed Jul 10 2013 - 03:27:44 EST

Next message: Laxman Dewangan: "[PATCH V2] ARM: tegra: enable palmas device for dalmore"
Previous message: Michael Neuling: "Re: [PATCH 0/2] powerpc: allow kvm to use kerel debug framework"
In reply to: Jason Cooper: "Re: [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'"
Next in thread: Jason Cooper: "Re: [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Jason,

> -----Original Message-----
> From: Jason Cooper [mailto:jason@xxxxxxxxxxxxxx]
> Sent: 2013年7月9日 20:49
> To: Neil Zhang
> Cc: grant.likely@xxxxxxxxxx; haojian.zhuang@xxxxxxxxx; arnd@xxxxxxxx;
> devicetree-discuss@xxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'
>
> Neil,
>
> On Tue, Jul 09, 2013 at 02:42:44PM +0800, Neil Zhang wrote:
> > The documented vendor prefix for Marvell is 'marvell', not 'mrvl', so
> > let's change it.
> >
> > Signed-off-by: Neil Zhang <zhangwm@xxxxxxxxxxx>
> > ---
> > .../devicetree/bindings/arm/mrvl/intc.txt | 16 +++---
> > .../devicetree/bindings/arm/mrvl/mrvl.txt | 6 +-
> > .../devicetree/bindings/arm/mrvl/timer.txt | 4 +-
> > Documentation/devicetree/bindings/i2c/i2c-pxa.txt | 14 +++---
> > .../devicetree/bindings/mmc/sdhci-pxa.txt | 8 ++--
> > .../devicetree/bindings/rtc/sa1100-rtc.txt | 4 +-
> > .../devicetree/bindings/serial/mrvl-serial.txt | 2 +-
> > arch/arm/boot/dts/mmp2-brownstone.dts | 2 +-
> > arch/arm/boot/dts/mmp2.dtsi | 56
> ++++++++++----------
> > arch/arm/boot/dts/pxa168-aspenite.dts | 2 +-
> > arch/arm/boot/dts/pxa168.dtsi | 24
> ++++----
> > arch/arm/boot/dts/pxa2xx.dtsi | 16 +++---
> > arch/arm/boot/dts/pxa3xx.dtsi | 2 +-
> > arch/arm/boot/dts/pxa910-dkb.dts | 2 +-
> > arch/arm/boot/dts/pxa910.dtsi | 27
> +++++-----
> > arch/arm/mach-mmp/irq.c | 16
> +++---
> > arch/arm/mach-mmp/mmp-dt.c | 28
> +++++-----
> > arch/arm/mach-mmp/mmp2-dt.c | 16
> +++---
> > arch/arm/mach-mmp/time.c | 2 +-
> > arch/arm/mach-pxa/pxa-dt.c | 14
> +++---
> > drivers/i2c/busses/i2c-pxa.c | 10 ++--
> > drivers/mmc/host/sdhci-pxav2.c | 4 +-
> > drivers/mmc/host/sdhci-pxav3.c | 4 +-
> > drivers/rtc/rtc-sa1100.c | 4 +-
> > drivers/tty/serial/pxa.c | 4 +-
> > 25 files changed, 144 insertions(+), 143 deletions(-)
>
> I agree with the need to change, however, this has been in the binding
> documentation since v3.5. I wish we had caught this when we decided
> against using stock ticker symbols (not all stock markets use alphabetical
> abbreviated names, not all companies are listed on any stock exchange).
>
> To do this properly, the drivers are going to have to be compatible with the
> old and the new names, and the binding docs updated to reflect the legacy
> name and the preferred name.
>
Do you mean it's better to support both legacy and preferred name at the same time?

> thx,
>
> Jason.
>
> > diff --git a/Documentation/devicetree/bindings/arm/mrvl/intc.txt
> > b/Documentation/devicetree/bindings/arm/mrvl/intc.txt
> > index 8b53273..ad27548 100644
> > --- a/Documentation/devicetree/bindings/arm/mrvl/intc.txt
> > +++ b/Documentation/devicetree/bindings/arm/mrvl/intc.txt
> > @@ -1,8 +1,8 @@
> > * Marvell MMP Interrupt controller
> >
> > Required properties:
> > -- compatible : Should be "mrvl,mmp-intc", "mrvl,mmp2-intc" or
> > - "mrvl,mmp2-mux-intc"
> > +- compatible : Should be "marvell,mmp-intc", "marvell,mmp2-intc" or
> > + "marvell,mmp2-mux-intc"
> > - reg : Address and length of the register set of the interrupt controller.
> > If the interrupt controller is intc, address and length means the range
> > of the whold interrupt controller. If the interrupt controller is
> > mux-intc, @@ -15,28 +15,28 @@ Required properties:
> > - interrupt-controller : Identifies the node as an interrupt controller.
> > - #interrupt-cells : Specifies the number of cells needed to encode an
> > interrupt source.
> > -- mrvl,intc-nr-irqs : Specifies the number of interrupts in the
> > interrupt
> > +- marvell,intc-nr-irqs : Specifies the number of interrupts in the
> > +interrupt
> > controller.
> > -- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP
> > edge
> > +- marvell,clr-mfp-irq : Specifies the interrupt that needs to clear
> > +MFP edge
> > detection first.
> >
> > Example:
> > intc: interrupt-controller@d4282000 {
> > - compatible = "mrvl,mmp2-intc";
> > + compatible = "marvell,mmp2-intc";
> > interrupt-controller;
> > #interrupt-cells = <1>;
> > reg = <0xd4282000 0x1000>;
> > - mrvl,intc-nr-irqs = <64>;
> > + marvell,intc-nr-irqs = <64>;
> > };
> >
> > intcmux4@d4282150 {
> > - compatible = "mrvl,mmp2-mux-intc";
> > + compatible = "marvell,mmp2-mux-intc";
> > interrupts = <4>;
> > interrupt-controller;
> > #interrupt-cells = <1>;
> > reg = <0x150 0x4>, <0x168 0x4>;
> > reg-names = "mux status", "mux mask";
> > - mrvl,intc-nr-irqs = <2>;
> > + marvell,intc-nr-irqs = <2>;
> > };
> >
> > * Marvell Orion Interrupt controller
> > diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt
> > b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt
> > index 117d741..87f1d42 100644
> > --- a/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt
> > +++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt
> > @@ -3,12 +3,12 @@ Marvell Platforms Device Tree Bindings
> >
> > PXA168 Aspenite Board
> > Required root node properties:
> > - - compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
> > + - compatible = "marvell,pxa168-aspenite", "marvell,pxa168";
> >
> > PXA910 DKB Board
> > Required root node properties:
> > - - compatible = "mrvl,pxa910-dkb";
> > + - compatible = "marvell,pxa910-dkb";
> >
> > MMP2 Brownstone Board
> > Required root node properties:
> > - - compatible = "mrvl,mmp2-brownstone";
> > + - compatible = "marvell,mmp2-brownstone";
> > diff --git a/Documentation/devicetree/bindings/arm/mrvl/timer.txt
> > b/Documentation/devicetree/bindings/arm/mrvl/timer.txt
> > index 9a6e251..1304526 100644
> > --- a/Documentation/devicetree/bindings/arm/mrvl/timer.txt
> > +++ b/Documentation/devicetree/bindings/arm/mrvl/timer.txt
> > @@ -1,13 +1,13 @@
> > * Marvell MMP Timer controller
> >
> > Required properties:
> > -- compatible : Should be "mrvl,mmp-timer".
> > +- compatible : Should be "marvell,mmp-timer".
> > - reg : Address and length of the register set of timer controller.
> > - interrupts : Should be the interrupt number.
> >
> > Example:
> > timer0: timer@d4014000 {
> > - compatible = "mrvl,mmp-timer";
> > + compatible = "marvell,mmp-timer";
> > reg = <0xd4014000 0x100>;
> > interrupts = <13>;
> > };
> > diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
> > b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
> > index 12b78ac..34fdf5d 100644
> > --- a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
> > +++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
> > @@ -3,9 +3,9 @@
> > Required properties :
> >
> > - reg : Offset and length of the register set for the device
> > - - compatible : should be "mrvl,mmp-twsi" where mmp is the name of a
> > + - compatible : should be "marvell,mmp-twsi" where mmp is the name of
> > + a
> > compatible processor, e.g. pxa168, pxa910, mmp2, mmp3.
> > - For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required
> > + For the pxa2xx/pxa3xx, an additional node "marvell,pxa-i2c" is
> > + required
> > as shown in the example below.
> >
> > Recommended properties :
> > @@ -14,20 +14,20 @@ Recommended properties :
> > - interrupt-parent : the phandle for the interrupt controller that
> > services interrupts for this device. If the parent is the default
> > interrupt controller in device tree, it could be ignored.
> > - - mrvl,i2c-polling : Disable interrupt of i2c controller. Polling
> > + - marvell,i2c-polling : Disable interrupt of i2c controller. Polling
> > status register of i2c controller instead.
> > - - mrvl,i2c-fast-mode : Enable fast mode of i2c controller.
> > + - marvell,i2c-fast-mode : Enable fast mode of i2c controller.
> >
> > Examples:
> > twsi1: i2c@d4011000 {
> > - compatible = "mrvl,mmp-twsi";
> > + compatible = "marvell,mmp-twsi";
> > reg = <0xd4011000 0x1000>;
> > interrupts = <7>;
> > - mrvl,i2c-fast-mode;
> > + marvell,i2c-fast-mode;
> > };
> >
> > twsi2: i2c@d4025000 {
> > - compatible = "mrvl,mmp-twsi";
> > + compatible = "marvell,mmp-twsi";
> > reg = <0xd4025000 0x1000>;
> > interrupts = <58>;
> > };
> > diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
> > b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
> > index dbe98a3..d603a3e 100644
> > --- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
> > +++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
> > @@ -4,18 +4,18 @@ This file documents differences between the core
> > properties in mmc.txt and the properties used by the sdhci-pxav2 and
> sdhci-pxav3 drivers.
> >
> > Required properties:
> > -- compatible: Should be "mrvl,pxav2-mmc" or "mrvl,pxav3-mmc".
> > +- compatible: Should be "marvell,pxav2-mmc" or "marvell,pxav3-mmc".
> >
> > Optional properties:
> > -- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
> > +- marvell,clk-delay-cycles: Specify a number of cycles to delay for tuning.
> >
> > Example:
> >
> > sdhci@d4280800 {
> > - compatible = "mrvl,pxav3-mmc";
> > + compatible = "marvell,pxav3-mmc";
> > reg = <0xd4280800 0x800>;
> > bus-width = <8>;
> > interrupts = <27>;
> > non-removable;
> > - mrvl,clk-delay-cycles = <31>;
> > + marvell,clk-delay-cycles = <31>;
> > };
> > diff --git a/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
> > b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
> > index 0cda19a..886fe15 100644
> > --- a/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
> > +++ b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
> > @@ -1,7 +1,7 @@
> > * Marvell Real Time Clock controller
> >
> > Required properties:
> > -- compatible: should be "mrvl,sa1100-rtc"
> > +- compatible: should be "marvell,sa1100-rtc"
> > - reg: physical base address of the controller and length of memory
> mapped
> > region.
> > - interrupts: Should be two. The first interrupt number is the rtc
> > alarm @@ -10,7 +10,7 @@ Required properties:
> >
> > Example:
> > rtc: rtc@d4010000 {
> > - compatible = "mrvl,mmp-rtc";
> > + compatible = "marvell,mmp-rtc";
> > reg = <0xd4010000 0x1000>;
> > interrupts = <5>, <6>;
> > interrupt-name = "rtc 1Hz", "rtc alarm"; diff --git
> > a/Documentation/devicetree/bindings/serial/mrvl-serial.txt
> > b/Documentation/devicetree/bindings/serial/mrvl-serial.txt
> > index d744340..659d35e 100644
> > --- a/Documentation/devicetree/bindings/serial/mrvl-serial.txt
> > +++ b/Documentation/devicetree/bindings/serial/mrvl-serial.txt
> > @@ -1,4 +1,4 @@
> > PXA UART controller
> >
> > Required properties:
> > -- compatible : should be "mrvl,mmp-uart" or "mrvl,pxa-uart".
> > +- compatible : should be "marvell,mmp-uart" or "marvell,pxa-uart".
> > diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts
> > b/arch/arm/boot/dts/mmp2-brownstone.dts
> > index 7f70a39..26abfde 100644
> > --- a/arch/arm/boot/dts/mmp2-brownstone.dts
> > +++ b/arch/arm/boot/dts/mmp2-brownstone.dts
> > @@ -12,7 +12,7 @@
> >
> > / {
> > model = "Marvell MMP2 Brownstone Development Board";
> > - compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
> > + compatible = "marvell,mmp2-brownstone", "marvell,mmp2";
> >
> > chosen {
> > bootargs = "console=ttyS2,38400 root=/dev/nfs
> > nfsroot=192.168.1.100:/nfsroot/
> > ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
> > diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
> > index 4e8b08c..ac13654 100644
> > --- a/arch/arm/boot/dts/mmp2.dtsi
> > +++ b/arch/arm/boot/dts/mmp2.dtsi
> > @@ -32,128 +32,128 @@
> > };
> >
> > axi@d4200000 { /* AXI */
> > - compatible = "mrvl,axi-bus", "simple-bus";
> > + compatible = "marvell,axi-bus", "simple-bus";
> > #address-cells = <1>;
> > #size-cells = <1>;
> > reg = <0xd4200000 0x00200000>;
> > ranges;
> >
> > intc: interrupt-controller@d4282000 {
> > - compatible = "mrvl,mmp2-intc";
> > + compatible = "marvell,mmp2-intc";
> > interrupt-controller;
> > #interrupt-cells = <1>;
> > reg = <0xd4282000 0x1000>;
> > - mrvl,intc-nr-irqs = <64>;
> > + marvell,intc-nr-irqs = <64>;
> > };
> >
> > intcmux4: interrupt-controller@d4282150 {
> > - compatible = "mrvl,mmp2-mux-intc";
> > + compatible = "marvell,mmp2-mux-intc";
> > interrupts = <4>;
> > interrupt-controller;
> > #interrupt-cells = <1>;
> > reg = <0x150 0x4>, <0x168 0x4>;
> > reg-names = "mux status", "mux mask";
> > - mrvl,intc-nr-irqs = <2>;
> > + marvell,intc-nr-irqs = <2>;
> > };
> >
> > intcmux5: interrupt-controller@d4282154 {
> > - compatible = "mrvl,mmp2-mux-intc";
> > + compatible = "marvell,mmp2-mux-intc";
> > interrupts = <5>;
> > interrupt-controller;
> > #interrupt-cells = <1>;
> > reg = <0x154 0x4>, <0x16c 0x4>;
> > reg-names = "mux status", "mux mask";
> > - mrvl,intc-nr-irqs = <2>;
> > - mrvl,clr-mfp-irq = <1>;
> > + marvell,intc-nr-irqs = <2>;
> > + marvell,clr-mfp-irq = <1>;
> > };
> >
> > intcmux9: interrupt-controller@d4282180 {
> > - compatible = "mrvl,mmp2-mux-intc";
> > + compatible = "marvell,mmp2-mux-intc";
> > interrupts = <9>;
> > interrupt-controller;
> > #interrupt-cells = <1>;
> > reg = <0x180 0x4>, <0x17c 0x4>;
> > reg-names = "mux status", "mux mask";
> > - mrvl,intc-nr-irqs = <3>;
> > + marvell,intc-nr-irqs = <3>;
> > };
> >
> > intcmux17: interrupt-controller@d4282158 {
> > - compatible = "mrvl,mmp2-mux-intc";
> > + compatible = "marvell,mmp2-mux-intc";
> > interrupts = <17>;
> > interrupt-controller;
> > #interrupt-cells = <1>;
> > reg = <0x158 0x4>, <0x170 0x4>;
> > reg-names = "mux status", "mux mask";
> > - mrvl,intc-nr-irqs = <5>;
> > + marvell,intc-nr-irqs = <5>;
> > };
> >
> > intcmux35: interrupt-controller@d428215c {
> > - compatible = "mrvl,mmp2-mux-intc";
> > + compatible = "marvell,mmp2-mux-intc";
> > interrupts = <35>;
> > interrupt-controller;
> > #interrupt-cells = <1>;
> > reg = <0x15c 0x4>, <0x174 0x4>;
> > reg-names = "mux status", "mux mask";
> > - mrvl,intc-nr-irqs = <15>;
> > + marvell,intc-nr-irqs = <15>;
> > };
> >
> > intcmux51: interrupt-controller@d4282160 {
> > - compatible = "mrvl,mmp2-mux-intc";
> > + compatible = "marvell,mmp2-mux-intc";
> > interrupts = <51>;
> > interrupt-controller;
> > #interrupt-cells = <1>;
> > reg = <0x160 0x4>, <0x178 0x4>;
> > reg-names = "mux status", "mux mask";
> > - mrvl,intc-nr-irqs = <2>;
> > + marvell,intc-nr-irqs = <2>;
> > };
> >
> > intcmux55: interrupt-controller@d4282188 {
> > - compatible = "mrvl,mmp2-mux-intc";
> > + compatible = "marvell,mmp2-mux-intc";
> > interrupts = <55>;
> > interrupt-controller;
> > #interrupt-cells = <1>;
> > reg = <0x188 0x4>, <0x184 0x4>;
> > reg-names = "mux status", "mux mask";
> > - mrvl,intc-nr-irqs = <2>;
> > + marvell,intc-nr-irqs = <2>;
> > };
> > };
> >
> > apb@d4000000 { /* APB */
> > - compatible = "mrvl,apb-bus", "simple-bus";
> > + compatible = "marvell,apb-bus", "simple-bus";
> > #address-cells = <1>;
> > #size-cells = <1>;
> > reg = <0xd4000000 0x00200000>;
> > ranges;
> >
> > timer0: timer@d4014000 {
> > - compatible = "mrvl,mmp-timer";
> > + compatible = "marvell,mmp-timer";
> > reg = <0xd4014000 0x100>;
> > interrupts = <13>;
> > };
> >
> > uart1: uart@d4030000 {
> > - compatible = "mrvl,mmp-uart";
> > + compatible = "marvell,mmp-uart";
> > reg = <0xd4030000 0x1000>;
> > interrupts = <27>;
> > status = "disabled";
> > };
> >
> > uart2: uart@d4017000 {
> > - compatible = "mrvl,mmp-uart";
> > + compatible = "marvell,mmp-uart";
> > reg = <0xd4017000 0x1000>;
> > interrupts = <28>;
> > status = "disabled";
> > };
> >
> > uart3: uart@d4018000 {
> > - compatible = "mrvl,mmp-uart";
> > + compatible = "marvell,mmp-uart";
> > reg = <0xd4018000 0x1000>;
> > interrupts = <24>;
> > status = "disabled";
> > };
> >
> > uart4: uart@d4016000 {
> > - compatible = "mrvl,mmp-uart";
> > + compatible = "marvell,mmp-uart";
> > reg = <0xd4016000 0x1000>;
> > interrupts = <46>;
> > status = "disabled";
> > @@ -198,24 +198,24 @@
> > };
> >
> > twsi1: i2c@d4011000 {
> > - compatible = "mrvl,mmp-twsi";
> > + compatible = "marvell,mmp-twsi";
> > reg = <0xd4011000 0x1000>;
> > interrupts = <7>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > - mrvl,i2c-fast-mode;
> > + marvell,i2c-fast-mode;
> > status = "disabled";
> > };
> >
> > twsi2: i2c@d4025000 {
> > - compatible = "mrvl,mmp-twsi";
> > + compatible = "marvell,mmp-twsi";
> > reg = <0xd4025000 0x1000>;
> > interrupts = <58>;
> > status = "disabled";
> > };
> >
> > rtc: rtc@d4010000 {
> > - compatible = "mrvl,mmp-rtc";
> > + compatible = "marvell,mmp-rtc";
> > reg = <0xd4010000 0x1000>;
> > interrupts = <1 0>;
> > interrupt-names = "rtc 1Hz", "rtc alarm"; diff --git
> > a/arch/arm/boot/dts/pxa168-aspenite.dts
> > b/arch/arm/boot/dts/pxa168-aspenite.dts
> > index e762fac..1e2ac17 100644
> > --- a/arch/arm/boot/dts/pxa168-aspenite.dts
> > +++ b/arch/arm/boot/dts/pxa168-aspenite.dts
> > @@ -12,7 +12,7 @@
> >
> > / {
> > model = "Marvell PXA168 Aspenite Development Board";
> > - compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
> > + compatible = "marvell,pxa168-aspenite", "marvell,pxa168";
> >
> > chosen {
> > bootargs = "console=ttyS0,115200 root=/dev/nfs
> > nfsroot=192.168.1.100:/nfsroot/
> > ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
> > diff --git a/arch/arm/boot/dts/pxa168.dtsi
> > b/arch/arm/boot/dts/pxa168.dtsi index 975dad2..c08f5fc 100644
> > --- a/arch/arm/boot/dts/pxa168.dtsi
> > +++ b/arch/arm/boot/dts/pxa168.dtsi
> > @@ -26,51 +26,51 @@
> > ranges;
> >
> > axi@d4200000 { /* AXI */
> > - compatible = "mrvl,axi-bus", "simple-bus";
> > + compatible = "marvell,axi-bus", "simple-bus";
> > #address-cells = <1>;
> > #size-cells = <1>;
> > reg = <0xd4200000 0x00200000>;
> > ranges;
> >
> > intc: interrupt-controller@d4282000 {
> > - compatible = "mrvl,mmp-intc";
> > + compatible = "marvell,mmp-intc";
> > interrupt-controller;
> > #interrupt-cells = <1>;
> > reg = <0xd4282000 0x1000>;
> > - mrvl,intc-nr-irqs = <64>;
> > + marvell,intc-nr-irqs = <64>;
> > };
> >
> > };
> >
> > apb@d4000000 { /* APB */
> > - compatible = "mrvl,apb-bus", "simple-bus";
> > + compatible = "marvell,apb-bus", "simple-bus";
> > #address-cells = <1>;
> > #size-cells = <1>;
> > reg = <0xd4000000 0x00200000>;
> > ranges;
> >
> > timer0: timer@d4014000 {
> > - compatible = "mrvl,mmp-timer";
> > + compatible = "marvell,mmp-timer";
> > reg = <0xd4014000 0x100>;
> > interrupts = <13>;
> > };
> >
> > uart1: uart@d4017000 {
> > - compatible = "mrvl,mmp-uart";
> > + compatible = "marvell,mmp-uart";
> > reg = <0xd4017000 0x1000>;
> > interrupts = <27>;
> > status = "disabled";
> > };
> >
> > uart2: uart@d4018000 {
> > - compatible = "mrvl,mmp-uart";
> > + compatible = "marvell,mmp-uart";
> > reg = <0xd4018000 0x1000>;
> > interrupts = <28>;
> > status = "disabled";
> > };
> >
> > uart3: uart@d4026000 {
> > - compatible = "mrvl,mmp-uart";
> > + compatible = "marvell,mmp-uart";
> > reg = <0xd4026000 0x1000>;
> > interrupts = <29>;
> > status = "disabled";
> > @@ -107,22 +107,22 @@
> > };
> >
> > twsi1: i2c@d4011000 {
> > - compatible = "mrvl,mmp-twsi";
> > + compatible = "marvell,mmp-twsi";
> > reg = <0xd4011000 0x1000>;
> > interrupts = <7>;
> > - mrvl,i2c-fast-mode;
> > + marvell,i2c-fast-mode;
> > status = "disabled";
> > };
> >
> > twsi2: i2c@d4025000 {
> > - compatible = "mrvl,mmp-twsi";
> > + compatible = "marvell,mmp-twsi";
> > reg = <0xd4025000 0x1000>;
> > interrupts = <58>;
> > status = "disabled";
> > };
> >
> > rtc: rtc@d4010000 {
> > - compatible = "mrvl,mmp-rtc";
> > + compatible = "marvell,mmp-rtc";
> > reg = <0xd4010000 0x1000>;
> > interrupts = <5 6>;
> > interrupt-names = "rtc 1Hz", "rtc alarm"; diff --git
> > a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index
> > a5e90f0..c426b1e 100644
> > --- a/arch/arm/boot/dts/pxa2xx.dtsi
> > +++ b/arch/arm/boot/dts/pxa2xx.dtsi
> > @@ -47,7 +47,7 @@
> > };
> >
> > gpio: gpio@40e00000 {
> > - compatible = "mrvl,pxa-gpio";
> > + compatible = "marvell,pxa-gpio";
> > #address-cells = <0x1>;
> > #size-cells = <0x1>;
> > reg = <0x40e00000 0x10000>;
> > @@ -76,35 +76,35 @@
> > };
> >
> > ffuart: uart@40100000 {
> > - compatible = "mrvl,pxa-uart";
> > + compatible = "marvell,pxa-uart";
> > reg = <0x40100000 0x30>;
> > interrupts = <22>;
> > status = "disabled";
> > };
> >
> > btuart: uart@40200000 {
> > - compatible = "mrvl,pxa-uart";
> > + compatible = "marvell,pxa-uart";
> > reg = <0x40200000 0x30>;
> > interrupts = <21>;
> > status = "disabled";
> > };
> >
> > stuart: uart@40700000 {
> > - compatible = "mrvl,pxa-uart";
> > + compatible = "marvell,pxa-uart";
> > reg = <0x40700000 0x30>;
> > interrupts = <20>;
> > status = "disabled";
> > };
> >
> > hwuart: uart@41100000 {
> > - compatible = "mrvl,pxa-uart";
> > + compatible = "marvell,pxa-uart";
> > reg = <0x41100000 0x30>;
> > interrupts = <7>;
> > status = "disabled";
> > };
> >
> > pxai2c1: i2c@40301680 {
> > - compatible = "mrvl,pxa-i2c";
> > + compatible = "marvell,pxa-i2c";
> > reg = <0x40301680 0x30>;
> > interrupts = <18>;
> > #address-cells = <0x1>;
> > @@ -113,14 +113,14 @@
> > };
> >
> > usb0: ohci@4c000000 {
> > - compatible = "mrvl,pxa-ohci";
> > + compatible = "marvell,pxa-ohci";
> > reg = <0x4c000000 0x10000>;
> > interrupts = <3>;
> > status = "disabled";
> > };
> >
> > mmc0: mmc@41100000 {
> > - compatible = "mrvl,pxa-mmc";
> > + compatible = "marvell,pxa-mmc";
> > reg = <0x41100000 0x1000>;
> > interrupts = <23>;
> > status = "disabled";
> > diff --git a/arch/arm/boot/dts/pxa3xx.dtsi
> > b/arch/arm/boot/dts/pxa3xx.dtsi index f9d92da..0798031 100644
> > --- a/arch/arm/boot/dts/pxa3xx.dtsi
> > +++ b/arch/arm/boot/dts/pxa3xx.dtsi
> > @@ -7,7 +7,7 @@
> >
> > pxabus {
> > pwri2c: i2c@40f500c0 {
> > - compatible = "mrvl,pwri2c";
> > + compatible = "marvell,pwri2c";
> > reg = <0x40f500c0 0x30>;
> > interrupts = <6>;
> > #address-cells = <0x1>;
> > diff --git a/arch/arm/boot/dts/pxa910-dkb.dts
> > b/arch/arm/boot/dts/pxa910-dkb.dts
> > index 595492a..7384254 100644
> > --- a/arch/arm/boot/dts/pxa910-dkb.dts
> > +++ b/arch/arm/boot/dts/pxa910-dkb.dts
> > @@ -12,7 +12,7 @@
> >
> > / {
> > model = "Marvell PXA910 DKB Development Board";
> > - compatible = "mrvl,pxa910-dkb", "mrvl,pxa910";
> > + compatible = "marvell,pxa910-dkb", "marvell,pxa910";
> >
> > chosen {
> > bootargs = "console=ttyS0,115200 root=/dev/nfs
> > nfsroot=192.168.1.100:/nfsroot/
> > ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
> > diff --git a/arch/arm/boot/dts/pxa910.dtsi
> > b/arch/arm/boot/dts/pxa910.dtsi index 0247c62..b5594a0 100644
> > --- a/arch/arm/boot/dts/pxa910.dtsi
> > +++ b/arch/arm/boot/dts/pxa910.dtsi
> > @@ -31,58 +31,59 @@
> > };
> >
> > axi@d4200000 { /* AXI */
> > - compatible = "mrvl,axi-bus", "simple-bus";
> > + compatible = "marvell,axi-bus", "simple-bus";
> > #address-cells = <1>;
> > #size-cells = <1>;
> > reg = <0xd4200000 0x00200000>;
> > ranges;
> >
> > intc: interrupt-controller@d4282000 {
> > - compatible = "mrvl,mmp-intc";
> > + compatible = "marvell,mmp-intc";
> > interrupt-controller;
> > #interrupt-cells = <1>;
> > reg = <0xd4282000 0x1000>;
> > - mrvl,intc-nr-irqs = <64>;
> > + marvell,intc-nr-irqs = <64>;
> > +
> > };
> >
> > };
> >
> > apb@d4000000 { /* APB */
> > - compatible = "mrvl,apb-bus", "simple-bus";
> > + compatible = "marvell,apb-bus", "simple-bus";
> > #address-cells = <1>;
> > #size-cells = <1>;
> > reg = <0xd4000000 0x00200000>;
> > ranges;
> >
> > timer0: timer@d4014000 {
> > - compatible = "mrvl,mmp-timer";
> > + compatible = "marvell,mmp-timer";
> > reg = <0xd4014000 0x100>;
> > interrupts = <13>;
> > };
> >
> > timer1: timer@d4016000 {
> > - compatible = "mrvl,mmp-timer";
> > + compatible = "marvell,mmp-timer";
> > reg = <0xd4016000 0x100>;
> > interrupts = <29>;
> > status = "disabled";
> > };
> >
> > uart1: uart@d4017000 {
> > - compatible = "mrvl,mmp-uart";
> > + compatible = "marvell,mmp-uart";
> > reg = <0xd4017000 0x1000>;
> > interrupts = <27>;
> > status = "disabled";
> > };
> >
> > uart2: uart@d4018000 {
> > - compatible = "mrvl,mmp-uart";
> > + compatible = "marvell,mmp-uart";
> > reg = <0xd4018000 0x1000>;
> > interrupts = <28>;
> > status = "disabled";
> > };
> >
> > uart3: uart@d4036000 {
> > - compatible = "mrvl,mmp-uart";
> > + compatible = "marvell,mmp-uart";
> > reg = <0xd4036000 0x1000>;
> > interrupts = <59>;
> > status = "disabled";
> > @@ -119,17 +120,17 @@
> > };
> >
> > twsi1: i2c@d4011000 {
> > - compatible = "mrvl,mmp-twsi";
> > + compatible = "marvell,mmp-twsi";
> > #address-cells = <1>;
> > #size-cells = <0>;
> > reg = <0xd4011000 0x1000>;
> > interrupts = <7>;
> > - mrvl,i2c-fast-mode;
> > + marvell,i2c-fast-mode;
> > status = "disabled";
> > };
> >
> > twsi2: i2c@d4037000 {
> > - compatible = "mrvl,mmp-twsi";
> > + compatible = "marvell,mmp-twsi";
> > #address-cells = <1>;
> > #size-cells = <0>;
> > reg = <0xd4037000 0x1000>;
> > @@ -138,7 +139,7 @@
> > };
> >
> > rtc: rtc@d4010000 {
> > - compatible = "mrvl,mmp-rtc";
> > + compatible = "marvell,mmp-rtc";
> > reg = <0xd4010000 0x1000>;
> > interrupts = <5 6>;
> > interrupt-names = "rtc 1Hz", "rtc alarm"; diff --git
> > a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c index
> > 3c71246..a7a53611 100644
> > --- a/arch/arm/mach-mmp/irq.c
> > +++ b/arch/arm/mach-mmp/irq.c
> > @@ -327,13 +327,13 @@ void __init mmp2_init_icu(void)
> >
> > #ifdef CONFIG_OF
> > static const struct of_device_id intc_ids[] __initconst = {
> > - { .compatible = "mrvl,mmp-intc", .data = &mmp_conf },
> > - { .compatible = "mrvl,mmp2-intc", .data = &mmp2_conf },
> > + { .compatible = "marvell,mmp-intc", .data = &mmp_conf },
> > + { .compatible = "marvell,mmp2-intc", .data = &mmp2_conf },
> > {}
> > };
> >
> > static const struct of_device_id mmp_mux_irq_match[] __initconst = {
> > - { .compatible = "mrvl,mmp2-mux-intc" },
> > + { .compatible = "marvell,mmp2-mux-intc" },
> > {}
> > };
> >
> > @@ -352,10 +352,10 @@ int __init mmp2_mux_init(struct device_node
> *parent)
> > if (!node)
> > break;
> > of_id = of_match_node(&mmp_mux_irq_match[0], node);
> > - ret = of_property_read_u32(node, "mrvl,intc-nr-irqs",
> > + ret = of_property_read_u32(node, "marvell,intc-nr-irqs",
> > &nr_irqs);
> > if (ret) {
> > - pr_err("Not found mrvl,intc-nr-irqs property\n");
> > + pr_err("Not found marvell,intc-nr-irqs property\n");
> > ret = -EINVAL;
> > goto err;
> > }
> > @@ -385,7 +385,7 @@ int __init mmp2_mux_init(struct device_node
> *parent)
> > ret = irq_base;
> > goto err;
> > }
> > - if (!of_property_read_u32(node, "mrvl,clr-mfp-irq",
> > + if (!of_property_read_u32(node, "marvell,clr-mfp-irq",
> > &mfp_irq)) {
> > icu_data[i].clr_mfp_irq_base = irq_base;
> > icu_data[i].clr_mfp_hwirq = mfp_irq; @@ -424,9 +424,9 @@
> void
> > __init mmp_dt_irq_init(void)
> > of_id = of_match_node(intc_ids, node);
> > conf = of_id->data;
> >
> > - ret = of_property_read_u32(node, "mrvl,intc-nr-irqs", &nr_irqs);
> > + ret = of_property_read_u32(node, "marvell,intc-nr-irqs", &nr_irqs);
> > if (ret) {
> > - pr_err("Not found mrvl,intc-nr-irqs property\n");
> > + pr_err("Not found marvell,intc-nr-irqs property\n");
> > return;
> > }
> >
> > diff --git a/arch/arm/mach-mmp/mmp-dt.c
> b/arch/arm/mach-mmp/mmp-dt.c
> > index b37915d..62c5adb 100644
> > --- a/arch/arm/mach-mmp/mmp-dt.c
> > +++ b/arch/arm/mach-mmp/mmp-dt.c
> > @@ -23,24 +23,24 @@ extern void __init mmp_dt_irq_init(void); extern
> > void __init mmp_dt_init_timer(void);
> >
> > static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst
> = {
> > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0",
> NULL),
> > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1",
> NULL),
> > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2",
> NULL),
> > - OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0",
> NULL),
> > - OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1",
> NULL),
> > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4017000, "pxa2xx-uart.0",
> NULL),
> > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4018000, "pxa2xx-uart.1",
> NULL),
> > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4026000, "pxa2xx-uart.2",
> NULL),
> > + OF_DEV_AUXDATA("marvell,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0",
> NULL),
> > + OF_DEV_AUXDATA("marvell,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1",
> > +NULL),
> > OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio",
> NULL),
> > - OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
> > + OF_DEV_AUXDATA("marvell,mmp-rtc", 0xd4010000, "sa1100-rtc",
> NULL),
> > {}
> > };
> >
> > static const struct of_dev_auxdata pxa910_auxdata_lookup[] __initconst
> = {
> > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0",
> NULL),
> > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1",
> NULL),
> > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4036000, "pxa2xx-uart.2",
> NULL),
> > - OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0",
> NULL),
> > - OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4037000, "pxa2xx-i2c.1",
> NULL),
> > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4017000, "pxa2xx-uart.0",
> NULL),
> > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4018000, "pxa2xx-uart.1",
> NULL),
> > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4036000, "pxa2xx-uart.2",
> NULL),
> > + OF_DEV_AUXDATA("marvell,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0",
> NULL),
> > + OF_DEV_AUXDATA("marvell,mmp-twsi", 0xd4037000, "pxa2xx-i2c.1",
> > +NULL),
> > OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio",
> NULL),
> > - OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
> > + OF_DEV_AUXDATA("marvell,mmp-rtc", 0xd4010000, "sa1100-rtc",
> NULL),
> > {}
> > };
> >
> > @@ -57,8 +57,8 @@ static void __init pxa910_dt_init(void) }
> >
> > static const char *mmp_dt_board_compat[] __initdata = {
> > - "mrvl,pxa168-aspenite",
> > - "mrvl,pxa910-dkb",
> > + "marvell,pxa168-aspenite",
> > + "marvell,pxa910-dkb",
> > NULL,
> > };
> >
> > diff --git a/arch/arm/mach-mmp/mmp2-dt.c
> b/arch/arm/mach-mmp/mmp2-dt.c
> > index 4ac2567..6523ecf 100644
> > --- a/arch/arm/mach-mmp/mmp2-dt.c
> > +++ b/arch/arm/mach-mmp/mmp2-dt.c
> > @@ -25,14 +25,14 @@ extern void __init mmp_dt_irq_init(void); extern
> > void __init mmp_dt_init_timer(void);
> >
> > static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst
> = {
> > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4030000, "pxa2xx-uart.0",
> NULL),
> > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.1",
> NULL),
> > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.2",
> NULL),
> > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4016000, "pxa2xx-uart.3",
> NULL),
> > - OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0",
> NULL),
> > - OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1",
> NULL),
> > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4030000, "pxa2xx-uart.0",
> NULL),
> > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4017000, "pxa2xx-uart.1",
> NULL),
> > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4018000, "pxa2xx-uart.2",
> NULL),
> > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4016000, "pxa2xx-uart.3",
> NULL),
> > + OF_DEV_AUXDATA("marvell,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0",
> NULL),
> > + OF_DEV_AUXDATA("marvell,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1",
> > +NULL),
> > OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp2-gpio",
> NULL),
> > - OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
> > + OF_DEV_AUXDATA("marvell,mmp-rtc", 0xd4010000, "sa1100-rtc",
> NULL),
> > {}
> > };
> >
> > @@ -43,7 +43,7 @@ static void __init mmp2_dt_init(void) }
> >
> > static const char *mmp2_dt_board_compat[] __initdata = {
> > - "mrvl,mmp2-brownstone",
> > + "marvell,mmp2-brownstone",
> > NULL,
> > };
> >
> > diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
> index
> > 7ac41e8..67e7d5c 100644
> > --- a/arch/arm/mach-mmp/time.c
> > +++ b/arch/arm/mach-mmp/time.c
> > @@ -208,7 +208,7 @@ void __init timer_init(int irq)
> >
> > #ifdef CONFIG_OF
> > static struct of_device_id mmp_timer_dt_ids[] = {
> > - { .compatible = "mrvl,mmp-timer", },
> > + { .compatible = "marvell,mmp-timer", },
> > {}
> > };
> >
> > diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
> > index 3835979..b679367 100644
> > --- a/arch/arm/mach-pxa/pxa-dt.c
> > +++ b/arch/arm/mach-pxa/pxa-dt.c
> > @@ -23,15 +23,15 @@
> > extern void __init pxa3xx_dt_init_irq(void);
> >
> > static const struct of_dev_auxdata pxa3xx_auxdata_lookup[] __initconst
> = {
> > - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40100000,
> "pxa2xx-uart.0", NULL),
> > - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40200000,
> "pxa2xx-uart.1", NULL),
> > - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40700000,
> "pxa2xx-uart.2", NULL),
> > - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x41600000,
> "pxa2xx-uart.3", NULL),
> > + OF_DEV_AUXDATA("marvell,pxa-uart", 0x40100000,
> "pxa2xx-uart.0", NULL),
> > + OF_DEV_AUXDATA("marvell,pxa-uart", 0x40200000,
> "pxa2xx-uart.1", NULL),
> > + OF_DEV_AUXDATA("marvell,pxa-uart", 0x40700000,
> "pxa2xx-uart.2", NULL),
> > + OF_DEV_AUXDATA("marvell,pxa-uart", 0x41600000,
> "pxa2xx-uart.3", NULL),
> > OF_DEV_AUXDATA("marvell,pxa-mmc", 0x41100000, "pxa2xx-mci.0",
> NULL),
> > - OF_DEV_AUXDATA("mrvl,pxa-gpio", 0x40e00000, "pxa-gpio",
> NULL),
> > + OF_DEV_AUXDATA("marvell,pxa-gpio", 0x40e00000, "pxa-gpio",
> NULL),
> > OF_DEV_AUXDATA("marvell,pxa-ohci", 0x4c000000, "pxa27x-ohci",
> NULL),
> > - OF_DEV_AUXDATA("mrvl,pxa-i2c", 0x40301680, "pxa2xx-i2c.0",
> NULL),
> > - OF_DEV_AUXDATA("mrvl,pwri2c", 0x40f500c0, "pxa3xx-i2c.1",
> NULL),
> > + OF_DEV_AUXDATA("marvell,pxa-i2c", 0x40301680, "pxa2xx-i2c.0",
> NULL),
> > + OF_DEV_AUXDATA("marvell,pwri2c", 0x40f500c0, "pxa3xx-i2c.1",
> NULL),
> > OF_DEV_AUXDATA("marvell,pxa3xx-nand", 0x43100000, "pxa3xx-nand",
> NULL),
> > {}
> > };
> > diff --git a/drivers/i2c/busses/i2c-pxa.c
> > b/drivers/i2c/busses/i2c-pxa.c index fbafed2..6f2b17d 100644
> > --- a/drivers/i2c/busses/i2c-pxa.c
> > +++ b/drivers/i2c/busses/i2c-pxa.c
> > @@ -1040,9 +1040,9 @@ static const struct i2c_algorithm
> > i2c_pxa_pio_algorithm = { };
> >
> > static struct of_device_id i2c_pxa_dt_ids[] = {
> > - { .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX },
> > - { .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX },
> > - { .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA2XX },
> > + { .compatible = "marvell,pxa-i2c", .data = (void *)REGS_PXA2XX },
> > + { .compatible = "marvell,pwri2c", .data = (void *)REGS_PXA3XX },
> > + { .compatible = "marvell,mmp-twsi", .data = (void *)REGS_PXA2XX },
> > {}
> > };
> > MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids); @@ -1060,9 +1060,9 @@
> static
> > int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
> > /* For device tree we always use the dynamic or alias-assigned ID */
> > i2c->adap.nr = -1;
> >
> > - if (of_get_property(np, "mrvl,i2c-polling", NULL))
> > + if (of_get_property(np, "marvell,i2c-polling", NULL))
> > i2c->use_pio = 1;
> > - if (of_get_property(np, "mrvl,i2c-fast-mode", NULL))
> > + if (of_get_property(np, "marvell,i2c-fast-mode", NULL))
> > i2c->fast_mode = 1;
> > *i2c_types = (u32)(of_id->data);
> > return 0;
> > diff --git a/drivers/mmc/host/sdhci-pxav2.c
> > b/drivers/mmc/host/sdhci-pxav2.c index 6a3f702..1dd6500 100644
> > --- a/drivers/mmc/host/sdhci-pxav2.c
> > +++ b/drivers/mmc/host/sdhci-pxav2.c
> > @@ -120,7 +120,7 @@ static const struct sdhci_ops pxav2_sdhci_ops = {
> > #ifdef CONFIG_OF static const struct of_device_id
> > sdhci_pxav2_of_match[] = {
> > {
> > - .compatible = "mrvl,pxav2-mmc",
> > + .compatible = "marvell,pxav2-mmc",
> > },
> > {},
> > };
> > @@ -144,7 +144,7 @@ static struct sdhci_pxa_platdata
> *pxav2_get_mmc_pdata(struct device *dev)
> > if (bus_width == 8)
> > pdata->flags |= PXA_FLAG_SD_8_BIT_CAPABLE_SLOT;
> >
> > - of_property_read_u32(np, "mrvl,clk-delay-cycles", &clk_delay_cycles);
> > + of_property_read_u32(np, "marvell,clk-delay-cycles",
> > +&clk_delay_cycles);
> > if (clk_delay_cycles > 0) {
> > pdata->clk_delay_sel = 1;
> > pdata->clk_delay_cycles = clk_delay_cycles; diff --git
> > a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
> > index 1ae358e..a88974b 100644
> > --- a/drivers/mmc/host/sdhci-pxav3.c
> > +++ b/drivers/mmc/host/sdhci-pxav3.c
> > @@ -185,7 +185,7 @@ static struct sdhci_pltfm_data sdhci_pxav3_pdata
> =
> > { #ifdef CONFIG_OF static const struct of_device_id
> > sdhci_pxav3_of_match[] = {
> > {
> > - .compatible = "mrvl,pxav3-mmc",
> > + .compatible = "marvell,pxav3-mmc",
> > },
> > {},
> > };
> > @@ -201,7 +201,7 @@ static struct sdhci_pxa_platdata
> *pxav3_get_mmc_pdata(struct device *dev)
> > if (!pdata)
> > return NULL;
> >
> > - of_property_read_u32(np, "mrvl,clk-delay-cycles", &clk_delay_cycles);
> > + of_property_read_u32(np, "marvell,clk-delay-cycles",
> > +&clk_delay_cycles);
> > if (clk_delay_cycles > 0)
> > pdata->clk_delay_cycles = clk_delay_cycles;
> >
> > diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index
> > 0f7adeb..307dd37 100644
> > --- a/drivers/rtc/rtc-sa1100.c
> > +++ b/drivers/rtc/rtc-sa1100.c
> > @@ -339,8 +339,8 @@ static SIMPLE_DEV_PM_OPS(sa1100_rtc_pm_ops,
> > sa1100_rtc_suspend,
> >
> > #ifdef CONFIG_OF
> > static struct of_device_id sa1100_rtc_dt_ids[] = {
> > - { .compatible = "mrvl,sa1100-rtc", },
> > - { .compatible = "mrvl,mmp-rtc", },
> > + { .compatible = "marvell,sa1100-rtc", },
> > + { .compatible = "marvell,mmp-rtc", },
> > {}
> > };
> > MODULE_DEVICE_TABLE(of, sa1100_rtc_dt_ids); diff --git
> > a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c index
> > 05f504e..cb1a439 100644
> > --- a/drivers/tty/serial/pxa.c
> > +++ b/drivers/tty/serial/pxa.c
> > @@ -852,8 +852,8 @@ static const struct dev_pm_ops
> serial_pxa_pm_ops =
> > { #endif
> >
> > static struct of_device_id serial_pxa_dt_ids[] = {
> > - { .compatible = "mrvl,pxa-uart", },
> > - { .compatible = "mrvl,mmp-uart", },
> > + { .compatible = "marvell,pxa-uart", },
> > + { .compatible = "marvell,mmp-uart", },
> > {}
> > };
> > MODULE_DEVICE_TABLE(of, serial_pxa_dt_ids);
> > --
> > 1.7.4.1
> >
> >

Best Regards,
Neil Zhang

> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
㈤旃??????+-遍荻?w??笔???dz罐??骅w*jg??????/??罐????璀??摺?囤??????:+v???佶>W?贽i?xPj???-?+?d?

Next message: Laxman Dewangan: "[PATCH V2] ARM: tegra: enable palmas device for dalmore"
Previous message: Michael Neuling: "Re: [PATCH 0/2] powerpc: allow kvm to use kerel debug framework"
In reply to: Jason Cooper: "Re: [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'"
Next in thread: Jason Cooper: "Re: [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]