Re: [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'

From: Haojian Zhuang
Date: Wed Jul 10 2013 - 04:19:55 EST


On Tue, Jul 9, 2013 at 8:49 PM, Jason Cooper <jason@xxxxxxxxxxxxxx> wrote:
> Neil,
>
> On Tue, Jul 09, 2013 at 02:42:44PM +0800, Neil Zhang wrote:
>> The documented vendor prefix for Marvell is 'marvell', not 'mrvl', so
>> let's change it.
>>
>> Signed-off-by: Neil Zhang <zhangwm@xxxxxxxxxxx>
>> ---
>> .../devicetree/bindings/arm/mrvl/intc.txt | 16 +++---
>> .../devicetree/bindings/arm/mrvl/mrvl.txt | 6 +-
>> .../devicetree/bindings/arm/mrvl/timer.txt | 4 +-
>> Documentation/devicetree/bindings/i2c/i2c-pxa.txt | 14 +++---
>> .../devicetree/bindings/mmc/sdhci-pxa.txt | 8 ++--
>> .../devicetree/bindings/rtc/sa1100-rtc.txt | 4 +-
>> .../devicetree/bindings/serial/mrvl-serial.txt | 2 +-
>> arch/arm/boot/dts/mmp2-brownstone.dts | 2 +-
>> arch/arm/boot/dts/mmp2.dtsi | 56 ++++++++++----------
>> arch/arm/boot/dts/pxa168-aspenite.dts | 2 +-
>> arch/arm/boot/dts/pxa168.dtsi | 24 ++++----
>> arch/arm/boot/dts/pxa2xx.dtsi | 16 +++---
>> arch/arm/boot/dts/pxa3xx.dtsi | 2 +-
>> arch/arm/boot/dts/pxa910-dkb.dts | 2 +-
>> arch/arm/boot/dts/pxa910.dtsi | 27 +++++-----
>> arch/arm/mach-mmp/irq.c | 16 +++---
>> arch/arm/mach-mmp/mmp-dt.c | 28 +++++-----
>> arch/arm/mach-mmp/mmp2-dt.c | 16 +++---
>> arch/arm/mach-mmp/time.c | 2 +-
>> arch/arm/mach-pxa/pxa-dt.c | 14 +++---
>> drivers/i2c/busses/i2c-pxa.c | 10 ++--
>> drivers/mmc/host/sdhci-pxav2.c | 4 +-
>> drivers/mmc/host/sdhci-pxav3.c | 4 +-
>> drivers/rtc/rtc-sa1100.c | 4 +-
>> drivers/tty/serial/pxa.c | 4 +-
>> 25 files changed, 144 insertions(+), 143 deletions(-)
>
> I agree with the need to change, however, this has been in the binding
> documentation since v3.5. I wish we had caught this when we decided
> against using stock ticker symbols (not all stock markets use
> alphabetical abbreviated names, not all companies are listed on any
> stock exchange).
>
> To do this properly, the drivers are going to have to be compatible with
> the old and the new names, and the binding docs updated to reflect the
> legacy name and the preferred name.
>

It's better to only use the new names.

Neil,

Could you split your patches according to different subsystem?

Regards
Haojian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/