[PATCH] gpio: Add MOXA ART GPIO driver
From: Jonas Jensen
Date: Wed Jul 10 2013 - 09:49:49 EST
Add GPIO driver for MOXA ART SoCs.
Signed-off-by: Jonas Jensen <jonas.jensen@xxxxxxxxx>
---
Notes:
Applies to next-20130703
drivers/gpio/Kconfig | 7 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-moxart.c | 168 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 176 insertions(+)
create mode 100644 drivers/gpio/gpio-moxart.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b2450ba..521fd97 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -714,6 +714,13 @@ config GPIO_MSIC
Enable support for GPIO on intel MSIC controllers found in
intel MID devices
+config GPIO_MOXART
+ bool "MOXART GPIO support"
+ depends on ARCH_MOXART
+ help
+ Select this option to enable GPIO driver for
+ MOXA ART SoC devices.
+
comment "USB GPIO expanders:"
config GPIO_VIPERBOARD
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index ef3e983..44b0de4 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_GPIO_MC9S08DZ60) += gpio-mc9s08dz60.o
obj-$(CONFIG_GPIO_MCP23S08) += gpio-mcp23s08.o
obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o
obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o
+obj-$(CONFIG_GPIO_MOXART) += gpio-moxart.o
obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o
obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o
obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o
diff --git a/drivers/gpio/gpio-moxart.c b/drivers/gpio/gpio-moxart.c
new file mode 100644
index 0000000..21d26c1
--- /dev/null
+++ b/drivers/gpio/gpio-moxart.c
@@ -0,0 +1,168 @@
+/*
+ * MOXA ART SoCs GPIO driver.
+ *
+ * Copyright (C) 2013 Jonas Jensen
+ *
+ * Jonas Jensen <jonas.jensen@xxxxxxxxx>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+
+#define SW_READY_GPIO (27)
+#define SW_RESET_GPIO (25)
+
+#define GPIO_DATA_OUT 0x00
+#define GPIO_DATA_IN 0x04
+#define GPIO_PIN_DIRECTION 0x08
+
+static void __iomem *moxart_pincontrol_base;
+static void __iomem *moxart_gpio_base;
+
+void moxart_gpio_enable(u32 gpio)
+{
+ writel(readl(moxart_pincontrol_base) | gpio, moxart_pincontrol_base);
+}
+
+void moxart_gpio_disable(u32 gpio)
+{
+ writel(readl(moxart_pincontrol_base) & ~gpio, moxart_pincontrol_base);
+}
+
+static int moxart_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ moxart_gpio_enable(1 << offset);
+ return pinctrl_request_gpio(offset);
+}
+
+static void moxart_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ pinctrl_free_gpio(offset);
+ moxart_gpio_disable(1 << offset);
+}
+
+static int moxart_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ void __iomem *ioaddr = moxart_gpio_base + GPIO_PIN_DIRECTION;
+
+ writel(readl(ioaddr) & ~(1 << offset), ioaddr);
+ return 0;
+}
+
+static int moxart_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ void __iomem *ioaddr = moxart_gpio_base + GPIO_PIN_DIRECTION;
+
+ writel(readl(ioaddr) | (1 << offset), ioaddr);
+ return 0;
+}
+
+static void moxart_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ void __iomem *ioaddr = moxart_gpio_base + GPIO_DATA_OUT;
+ u32 reg = readl(ioaddr);
+
+ (value) ? writel(reg | (1 << offset), ioaddr) :
+ writel(reg & ~(1 << offset), ioaddr);
+}
+
+static int moxart_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ u32 ret = readl(moxart_gpio_base + GPIO_PIN_DIRECTION);
+
+ if (ret & (1 << offset))
+ ret = readl(moxart_gpio_base + GPIO_DATA_OUT) & (1 << offset);
+ else
+ ret = readl(moxart_gpio_base + GPIO_DATA_IN) & (1 << offset);
+
+ return ret;
+}
+
+static struct gpio_chip moxart_gpio_chip = {
+ .label = "moxart-gpio",
+ .request = moxart_gpio_request,
+ .free = moxart_gpio_free,
+ .direction_input = moxart_gpio_direction_input,
+ .direction_output = moxart_gpio_direction_output,
+ .set = moxart_gpio_set,
+ .get = moxart_gpio_get,
+ .base = 0,
+ .ngpio = 32,
+ .can_sleep = 0,
+};
+
+static int moxart_gpio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ moxart_gpio_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(moxart_gpio_base)) {
+ dev_err(dev, "%s: devm_ioremap_resource res_gpio failed\n",
+ dev->of_node->full_name);
+ return PTR_ERR(moxart_gpio_base);
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ moxart_pincontrol_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(moxart_pincontrol_base)) {
+ dev_err(dev, "%s: devm_ioremap_resource res_pmu failed\n",
+ dev->of_node->full_name);
+ return PTR_ERR(moxart_pincontrol_base);
+ }
+
+ gpiochip_add(&moxart_gpio_chip);
+
+ moxart_gpio_enable(SW_READY_GPIO | SW_RESET_GPIO);
+
+ moxart_gpio_direction_input(&moxart_gpio_chip, SW_RESET_GPIO);
+
+ /*
+ * SW_READY_GPIO=0 ready LED on
+ * SW_READY_GPIO=1 ready LED off
+ */
+ moxart_gpio_direction_output(&moxart_gpio_chip, SW_READY_GPIO, 0);
+ moxart_gpio_set(&moxart_gpio_chip, SW_READY_GPIO, 0);
+
+ return 0;
+}
+
+static const struct of_device_id moxart_gpio_match[] = {
+ { .compatible = "moxa,moxart-gpio" },
+ { }
+};
+
+static struct platform_driver moxart_gpio_driver = {
+ .driver = {
+ .name = "moxart-gpio",
+ .owner = THIS_MODULE,
+ .of_match_table = moxart_gpio_match,
+ },
+ .probe = moxart_gpio_probe,
+};
+
+static int __init moxart_gpio_init(void)
+{
+ return platform_driver_register(&moxart_gpio_driver);
+}
+
+postcore_initcall(moxart_gpio_init);
+
+MODULE_DESCRIPTION("MOXART GPIO chip driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jonas Jensen <jonas.jensen@xxxxxxxxx>");
--
1.8.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/