[GIT PULL] Final round of SCSI updates for the 3.10+ merge window

From: James Bottomley
Date: Sat Jul 13 2013 - 00:30:24 EST

This is the remaining set of SCSI patches for the merge window. it's
mostly driver updates (scsi_debug, qla2xxx, storvsc, mp3sas). There are
also several bug fixes in fcoe, libfc, and megaraid_sas. We also have a
couple of core changes to try to make device destruction more
deterministic.

The patch is available here:

git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-for-linus

The short changelog is

Akinobu Mita (6):
scsi_debug: reduce duplication between prot_verify_read and prot_verify_write
scsi_debug: simplify offset calculation for dif_storep
scsi_debug: invalidate protection info for unmapped region
scsi_debug: fix NULL pointer dereference with parameters dif=0 dix=1
scsi_debug: fix incorrectly nested kmap_atomic()
scsi_debug: fix invalid address passed to kunmap_atomic()

Bart Van Assche (12):
fcoe: Reduce number of sparse warnings
enable destruction of blocked devices which fail LUN scanning
qla2xxx: Fix a memory leak in an error path of qla2x00_process_els()
qla2xxx: Remove an unused variable from qla2x00_remove_one().
qla2xxx: Fix qla2xxx_check_risc_status().
qla2xxx: Help Coverity with analyzing ct_sns_pkt initialization.
qla2xxx: Remove redundant assignments.
qla2xxx: Remove a dead assignment in qla24xx_build_scsi_crc_2_iocbs().
qla2xxx: Remove two superfluous tests.
qla2xxx: Remove dead code in qla2x00_configure_hba()
qla2xxx: Clean up qla84xx_mgmt_cmd()
qla2xxx: Clean up qla24xx_iidma()

Bjørn Mork (1):
megaraid_sas: fix memory leak if SGL has zero length entries

Chad Dupuis (2):
qla2xxx: Do not take a second firmware dump when intentionally generating one.
qla2xxx: Do not query FC statistics during chip reset.

Dan Carpenter (1):
megaraid_sas: fix a bug for 64 bit arches

Douglas Gilbert (1):
scsi constants: command, sense key + additional sense strings

Giridhar Malavali (2):
qla2xxx: Set the index in outstanding command array to NULL when cmd is aborted when the request timeout.
qla2xxx: Clear the MBX_INTR_WAIT flag when the mailbox time-out happens.

James Bottomley (1):
Fix race between starved list and device removal

K. Y. Srinivasan (3):
storvsc: Increase the value of STORVSC_MAX_IO_REQUESTS
storvsc: Support FC devices
storvsc: Implement multi-channel support

Mark Rustad (2):
fcoe: Stop fc_rport_priv structure leak
libfc: Reject PLOGI from nodes with incompatible role

Neerav Parikh (1):
fcoe: Fix smatch warning in fcoe_fdmi_info function

Robert Love (3):
libfcoe: Fix meaningless log statement
libfc: Differentiate echange timer cancellation debug statements
libfc: Remove extra space in fc_exch_timer_cancel definition

Saurav Kashyap (2):
qla2xxx: Fix sparse warning from qla_mr.c and qla_iocb.c.
qla2xxx: Move qla2x00_free_device to the correct location.

Sreekanth Reddy (7):
mpt3sas: Bump driver version to v02.100.00.00
mpt3sas: when async scanning is enabled then while scanning, devices are removed but their transport layer entries are not removed
mpt3sas: MPI2.5 Rev F v2.5.1.1 specification
mpt3sas: Infinite loops can occur if MPI2_IOCSTATUS_CONFIG_INVALID_PAGE is not returned
mpt3sas: fix for kernel panic when driver loads with HBA conected to non LUN 0 configured expander
mpt3sas: Updated the Hardware timing requirements
mpt3sas: 2013 source code copyright

Yi Zou (1):
fcoe: fix the link error status block sparse warnings

Yijing Wang (1):
pm8001: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)

The diffstat is

drivers/scsi/constants.c | 235 ++++++++++++++++++++++------
drivers/scsi/fcoe/fcoe.c | 26 +--
drivers/scsi/fcoe/fcoe_ctlr.c | 4 +
drivers/scsi/fcoe/fcoe_sysfs.c | 24 +--
drivers/scsi/fcoe/fcoe_transport.c | 28 +---
drivers/scsi/libfc/fc_exch.c | 4 +-
drivers/scsi/libfc/fc_rport.c | 27 ++++
drivers/scsi/megaraid/megaraid_sas_base.c | 10 +-
drivers/scsi/megaraid/megaraid_sas_fp.c | 4 +-
drivers/scsi/mpt3sas/Kconfig | 2 +-
drivers/scsi/mpt3sas/mpi/mpi2.h | 12 +-
drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 15 +-
drivers/scsi/mpt3sas/mpi/mpi2_init.h | 2 +-
drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 10 +-
drivers/scsi/mpt3sas/mpi/mpi2_raid.h | 10 +-
drivers/scsi/mpt3sas/mpi/mpi2_sas.h | 2 +-
drivers/scsi/mpt3sas/mpi/mpi2_tool.h | 10 +-
drivers/scsi/mpt3sas/mpi/mpi2_type.h | 2 +-
drivers/scsi/mpt3sas/mpt3sas_base.c | 22 ++-
drivers/scsi/mpt3sas/mpt3sas_base.h | 8 +-
drivers/scsi/mpt3sas/mpt3sas_config.c | 2 +-
drivers/scsi/mpt3sas/mpt3sas_ctl.c | 2 +-
drivers/scsi/mpt3sas/mpt3sas_ctl.h | 2 +-
drivers/scsi/mpt3sas/mpt3sas_debug.h | 2 +-
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 54 ++++---
drivers/scsi/mpt3sas/mpt3sas_transport.c | 2 +-
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c | 2 +-
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h | 2 +-
drivers/scsi/pm8001/pm8001_init.c | 7 +-
drivers/scsi/qla2xxx/qla_attr.c | 5 +-
drivers/scsi/qla2xxx/qla_bsg.c | 38 ++---
drivers/scsi/qla2xxx/qla_dbg.c | 12 +-
drivers/scsi/qla2xxx/qla_def.h | 34 ++--
drivers/scsi/qla2xxx/qla_gbl.h | 2 +-
drivers/scsi/qla2xxx/qla_gs.c | 86 +++++-----
drivers/scsi/qla2xxx/qla_init.c | 8 -
drivers/scsi/qla2xxx/qla_inline.h | 2 +-
drivers/scsi/qla2xxx/qla_iocb.c | 6 +-
drivers/scsi/qla2xxx/qla_isr.c | 1 +
drivers/scsi/qla2xxx/qla_mbx.c | 16 +-
drivers/scsi/qla2xxx/qla_mr.c | 167 ++++++++++----------
drivers/scsi/qla2xxx/qla_mr.h | 98 ++++++------
drivers/scsi/qla2xxx/qla_os.c | 10 +-
drivers/scsi/scsi_debug.c | 174 +++++++++-----------
drivers/scsi/scsi_lib.c | 27 +++-
drivers/scsi/storvsc_drv.c | 139 +++++++++++++++-
46 files changed, 828 insertions(+), 529 deletions(-)

James


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/