Re: [PATCH 3/3] pch_gbe: Add MinnowBoard support

[Darren Hart]

On Fri, 2013-07-12 at 18:10 -0700, Joe Perches wrote:
> On Fri, 2013-07-12 at 17:58 -0700, Darren Hart wrote:
> > The MinnowBoard uses an AR803x PHY with the PCH GBE which requires
> > special handling. Use the MinnowBoard PCI Subsystem ID to detect this
> > and add a pci_device_id.driver_data structure and functions to handle
> > platform setup.
> 
> trivial comments only:
> 
> Please use scripts/checkpatch.pl

Always good advice. I did actually do that. Some of the reports
conflict with existing formatting throughout the file. I opted for
consistency.

The others.... sigh, I did a last minute cleanup and somehow introduced
the whitespace errors. I do know better and should have waited until
tonight instead of sending them out when I was rushed. Apologies.

Fixed in V3 and awaiting additional feedback.

> 
> []
> 
> diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c[]
> []
> > +static int pch_gbe_minnow_platform_init(struct pci_dev *pdev)
> []
> > +	if (ret){
> 
> Missing space before brace

Fixed.

> 
> > diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c
> []
> > +int pch_gbe_phy_tx_clk_delay(struct pch_gbe_hw *hw)
> []
> > +	case PHY_AR803X_ID:
> > +		netdev_dbg(adapter->netdev,
> > +			   "Configuring AR803X PHY for 2ns TX clock delay\n"); 
> []
> > +		netdev_err(adapter->netdev,
> > +			   "Unknown PHY (%x), could not set TX clock delay.\n",
> > +			   hw->phy.id);
> []
> > +		netdev_err(adapter->netdev,
> > +			   "Could not configure tx clock delay for PHY.\n");
> []
> > +int pch_gbe_phy_disable_hibernate(struct pch_gbe_hw *hw)
> []
> > +	case PHY_AR803X_ID:
> > +		netdev_dbg(adapter->netdev,
> > +			   "Disabling hibernation for AR803X PHY\n");
> 
> It'd be nice if no period before newline were used
> everywhere.

Indeed, fixed.

Thank you for the review.

> 
> > +		netdev_err(adapter->netdev,
> > +			   "Unknown PHY (%x), could not disable hibernation\n",
> > +			   hw->phy.id);
> []
> > +		netdev_err(adapter->netdev,
> > +			   "Could not disable PHY hibernation.\n");
> 
> 

-- 
Darren Hart
Intel Open Source Technology Center
Yocto Project - Technical Lead - Linux Kernel

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/