Re: [PATCH 39/51] Input: atmel_mxt_ts - Implement T63 Active Stylussupport

From: rydberg
Date: Thu Jul 18 2013 - 13:20:50 EST

Next message: Jerry: "Re: [PATCH] mm: negative left shift count when PAGE_SHIFT > 20"
Previous message: rydberg: "Re: [PATCH 37/51] Input: atmel_mxt_ts - Implement vector/orientationsupport"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Thu, Jun 27, 2013 at 01:49:14PM +0100, Nick Dyer wrote:
> Signed-off-by: Nick Dyer <nick.dyer@xxxxxxxxxxx>
> Acked-by: Benson Leung <bleung@xxxxxxxxxxxx>
> ---
> drivers/input/touchscreen/atmel_mxt_ts.c | 95 +++++++++++++++++++++++++++++-
> 1 file changed, 94 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
> index b63f227..2e6118a 100644
> --- a/drivers/input/touchscreen/atmel_mxt_ts.c
> +++ b/drivers/input/touchscreen/atmel_mxt_ts.c
> @@ -78,6 +78,7 @@
> #define MXT_SPT_DIGITIZER_T43 43
> #define MXT_SPT_MESSAGECOUNT_T44 44
> #define MXT_SPT_CTECONFIG_T46 46
> +#define MXT_PROCI_ACTIVE_STYLUS_T63 63
>
> /* MXT_GEN_MESSAGE_T5 object */
> #define MXT_RPTID_NOMSG 0xff
> @@ -190,6 +191,19 @@ struct t9_range {
> /* Define for MXT_PROCI_TOUCHSUPPRESSION_T42 */
> #define MXT_T42_MSG_TCHSUP (1 << 0)
>
> +/* T63 Stylus */
> +#define MXT_T63_STYLUS_PRESS (1 << 0)
> +#define MXT_T63_STYLUS_RELEASE (1 << 1)
> +#define MXT_T63_STYLUS_MOVE (1 << 2)
> +#define MXT_T63_STYLUS_SUPPRESS (1 << 3)
> +
> +#define MXT_T63_STYLUS_DETECT (1 << 4)
> +#define MXT_T63_STYLUS_TIP (1 << 5)
> +#define MXT_T63_STYLUS_ERASER (1 << 6)
> +#define MXT_T63_STYLUS_BARREL (1 << 7)
> +
> +#define MXT_T63_STYLUS_PRESSURE_MASK 0x3F
> +
> /* Delay times */
> #define MXT_BACKUP_TIME 50 /* msec */
> #define MXT_RESET_TIME 200 /* msec */
> @@ -260,6 +274,7 @@ struct mxt_data {
> bool update_input;
> u8 last_message_count;
> u8 num_touchids;
> + u8 num_stylusids;
>
> /* Cached parameters from object table */
> u16 T5_address;
> @@ -274,6 +289,8 @@ struct mxt_data {
> u8 T42_reportid_max;
> u16 T44_address;
> u8 T48_reportid;
> + u8 T63_reportid_min;
> + u8 T63_reportid_max;
>
> /* for fw update in bootloader */
> struct completion bl_completion;
> @@ -823,6 +840,63 @@ static int mxt_proc_t48_messages(struct mxt_data *data, u8 *msg)
> return 0;
> }
>
> +static void mxt_proc_t63_messages(struct mxt_data *data, u8 *msg)
> +{
> + struct device *dev = &data->client->dev;
> + struct input_dev *input_dev = data->input_dev;
> + u8 id;
> + u16 x, y;
> + u8 pressure;
> +
> + /* do not report events if input device not yet registered */
> + if (!data->enable_reporting)
> + return;
> +
> + /* stylus slots come after touch slots */
> + id = data->num_touchids + (msg[0] - data->T63_reportid_min);
> +
> + if (id < 0 || id > (data->num_touchids + data->num_stylusids)) {
> + dev_err(dev, "invalid stylus id %d, max slot is %d\n",
> + id, data->num_stylusids);
> + return;
> + }
> +
> + x = msg[3] | (msg[4] << 8);
> + y = msg[5] | (msg[6] << 8);
> + pressure = msg[7] & MXT_T63_STYLUS_PRESSURE_MASK;
> +
> + dev_dbg(dev,
> + "[%d] %c%c%c%c x: %d y: %d pressure: %d stylus:%c%c%c%c\n",
> + id,
> + (msg[1] & MXT_T63_STYLUS_SUPPRESS) ? 'S' : '.',
> + (msg[1] & MXT_T63_STYLUS_MOVE) ? 'M' : '.',
> + (msg[1] & MXT_T63_STYLUS_RELEASE) ? 'R' : '.',
> + (msg[1] & MXT_T63_STYLUS_PRESS) ? 'P' : '.',
> + x, y, pressure,
> + (msg[2] & MXT_T63_STYLUS_BARREL) ? 'B' : '.',
> + (msg[2] & MXT_T63_STYLUS_ERASER) ? 'E' : '.',
> + (msg[2] & MXT_T63_STYLUS_TIP) ? 'T' : '.',
> + (msg[2] & MXT_T63_STYLUS_DETECT) ? 'D' : '.');
> +
> + input_mt_slot(input_dev, id);
> +
> + if (msg[2] & MXT_T63_STYLUS_DETECT) {
> + input_mt_report_slot_state(input_dev, MT_TOOL_PEN, 1);
> + input_report_abs(input_dev, ABS_MT_POSITION_X, x);
> + input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
> + input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
> + } else {
> + input_mt_report_slot_state(input_dev, MT_TOOL_PEN, 0);
> + }
> +
> + input_report_key(input_dev, BTN_STYLUS,
> + (msg[2] & MXT_T63_STYLUS_ERASER));
> + input_report_key(input_dev, BTN_STYLUS2,
> + (msg[2] & MXT_T63_STYLUS_BARREL));
> +
> + mxt_input_sync(input_dev);
> +}
> +
> static int mxt_proc_message(struct mxt_data *data, u8 *message)
> {
> u8 report_id = message[0];
> @@ -838,6 +912,9 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
> } else if (report_id == data->T19_reportid) {
> mxt_input_button(data, message);
> data->update_input = true;
> + } else if (report_id >= data->T63_reportid_min
> + && report_id <= data->T63_reportid_max) {
> + mxt_proc_t63_messages(data, message);
> } else if (report_id >= data->T42_reportid_min
> && report_id <= data->T42_reportid_max) {
> mxt_proc_t42_messages(data, message);
> @@ -1483,6 +1560,8 @@ static void mxt_free_object_table(struct mxt_data *data)
> data->T42_reportid_max = 0;
> data->T44_address = 0;
> data->T48_reportid = 0;
> + data->T63_reportid_min = 0;
> + data->T63_reportid_max = 0;
> data->max_reportid = 0;
> }
>
> @@ -1563,6 +1642,12 @@ static int mxt_get_object_table(struct mxt_data *data)
> case MXT_PROCG_NOISESUPPRESSION_T48:
> data->T48_reportid = min_id;
> break;
> + case MXT_PROCI_ACTIVE_STYLUS_T63:
> + data->T63_reportid_min = min_id;
> + data->T63_reportid_max = max_id;
> + data->num_stylusids = object->num_report_ids
> + * mxt_obj_instances(object);
> + break;
> }
>
> end_address = object->start_address
> @@ -2103,7 +2188,7 @@ static int mxt_initialize_t9_input_device(struct mxt_data *data)
> 0, 255, 0, 0);
>
> /* For multi touch */
> - num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
> + num_mt_slots = data->num_touchids + data->num_stylusids;
> error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags);
> if (error) {
> dev_err(dev, "Error %d initialising slots\n", error);
> @@ -2121,6 +2206,14 @@ static int mxt_initialize_t9_input_device(struct mxt_data *data)
> input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
> 0, 255, 0, 0);
>
> + /* For T63 active stylus */
> + if (data->T63_reportid_min) {
> + input_set_capability(input_dev, EV_KEY, BTN_STYLUS);
> + input_set_capability(input_dev, EV_KEY, BTN_STYLUS2);
> + input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
> + 0, MT_TOOL_MAX, 0, 0);
> + }
> +
> input_set_drvdata(input_dev, data);
>
> error = input_register_device(input_dev);
> --
> 1.7.10.4
>

Reviewed-by: Henrik Rydberg <rydberg@xxxxxxxxxxx>

Thanks,
Henrik
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Jerry: "Re: [PATCH] mm: negative left shift count when PAGE_SHIFT > 20"
Previous message: rydberg: "Re: [PATCH 37/51] Input: atmel_mxt_ts - Implement vector/orientationsupport"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]