Re: [PATCH] HID: multitouch: do not init reports for multitouch devices

[Benjamin Tissoires]

Hi Henrik,

On Thu, Jul 18, 2013 at 9:24 PM,  <rydberg@xxxxxxxxxxx> wrote:
> Hi Benjamin,
>
>> Some multitouch screens do not like to be polled for input reports.
>> However, the Win8 spec says that all touches should be sent during
>> each report, making the initialization of reports unnecessary.
>> The Win7 spec is less precise, but we can safely assume that when
>> the module is loaded (at boot), no one is touching the screen.
>>
>> Add the quirk HID_QUIRK_NO_INIT_REPORTS so that we do not have to
>> introduce a quirk for each problematic device.
>
> I assume you have tested thoroughly for regressions? How about odd
> eGalax devices, for instance? Changes affecting existing hardware
> makes me nervous. Is it so bad to add this quirk on a per-device
> basis? Or perhaps turned on by default for win8 devices only?

Aargh, I forgot the eGalax... (I don't have it anymore on my desk). I
was pretty confident because Win [7-8] is not doing any quirks for the
multitouch devices, and I had in mind that it did not asked for the
reports at startup (at least, I am sure about it for HID/I2C). I'm not
sure win 8 devices is a sufficient denominator, because this init
sequence is not mentioned anywhere in the Win 8 spec. It's true that
we are going to see fewer Win 7 devices, but I would say it's the
exact same problem for win 7 and 8. Moreover, asking this for Win 8
devices only will forces us to detect it in core before hid-multitouch
is loaded because the init reports is called before the parsing.

If I capture the Win 7 & Win 8 initialization events and I observe
that they do not retrieve the reports, will it be sufficient as a
guarantee to include this patch even if it is not widely tested under
Linux?

Cheers,
Benjamin
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/