[PATCH] regmap: irq: Acknowledge also interrupts that are masked

[Philipp Zabel]

In case the hardware interrupt mask register does not prevent the chip level
irq from being asserted by the corresponding interrupt status bit, stray
masked interrupts should to be acknowledged, too.

Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
---
I have seen GPI interrupts trigger on DA9063 trigger after being masked during
initialization, and once the status bits are set, the interrupt handler routine
never clears them, which keeps the chip irq line asserted forever.
---
 drivers/base/regmap/regmap-irq.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index 1643e88..0bdf43f 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -253,8 +253,6 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
 	 * doing a write per register.
 	 */
 	for (i = 0; i < data->chip->num_regs; i++) {
-		data->status_buf[i] &= ~data->mask_buf[i];
-
 		if (data->status_buf[i] && chip->ack_base) {
 			reg = chip->ack_base +
 				(i * map->reg_stride * data->irq_reg_stride);
@@ -263,6 +261,8 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
 				dev_err(map->dev, "Failed to ack 0x%x: %d\n",
 					reg, ret);
 		}
+
+		data->status_buf[i] &= ~data->mask_buf[i];
 	}
 
 	for (i = 0; i < chip->num_irqs; i++) {
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/