[PATCH] usb: gadget: at91_udc: Check gpio lookup results

[Olof Johansson]

This resolves the following valid build warning:

drivers/usb/gadget/at91_udc.c:1685:34: warning: 'flags' may be used uninitialized in this function [-Wmaybe-uninitialized]

I switched from ? : to !! mostly to save from wrapping the lines while
I was at it.

Signed-off-by: Olof Johansson <olof@xxxxxxxxx>
---

Felipe, this would be nice to see fixed for 3.11 but I'd argue that it's
been here long enough to not really be needed for -stable.

 drivers/usb/gadget/at91_udc.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 073b938..f3dbcd0 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1682,12 +1682,20 @@ static void at91udc_of_init(struct at91_udc *udc,
 
 	board->vbus_pin = of_get_named_gpio_flags(np, "atmel,vbus-gpio", 0,
 						  &flags);
-	board->vbus_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
+	if (board->vbus_pin < 0)
+		pr_err("%s: Failed to get atmel,vbus-gpio property\n",
+		       np->full_name);
+	else
+		board->vbus_active_low = !!(flags & OF_GPIO_ACTIVE_LOW);
 
 	board->pullup_pin = of_get_named_gpio_flags(np, "atmel,pullup-gpio", 0,
 						  &flags);
 
-	board->pullup_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
+	if (board->pullup_pin < 0)
+		pr_err("%s: Failed to get atmel,pullup-gpio property\n",
+		       np->full_name);
+	else
+		board->pullup_active_low = !!(flags & OF_GPIO_ACTIVE_LOW);
 }
 
 static int at91udc_probe(struct platform_device *pdev)
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/