[ 057/103] ath9k_hw: Assign default xlna config for AR9485

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>

commit 30d5b709da23f4ab9836c7f66d2d2e780a69cf12 upstream.

For AR9485 boards with XLNA, the default gpio config
is not set correctly, fix this.

Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c |    8 ++++++--
 drivers/net/wireless/ath/ath9k/ar9003_phy.h    |    2 ++
 2 files changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3563,14 +3563,18 @@ static void ar9003_hw_ant_ctrl_apply(str
 {
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	int chain;
-	u32 regval;
+	u32 regval, value;
 	static const u32 switch_chain_reg[AR9300_MAX_CHAINS] = {
 			AR_PHY_SWITCH_CHAIN_0,
 			AR_PHY_SWITCH_CHAIN_1,
 			AR_PHY_SWITCH_CHAIN_2,
 	};
 
-	u32 value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
+	if (AR_SREV_9485(ah) && (ar9003_hw_get_rx_gain_idx(ah) == 0))
+		ath9k_hw_cfg_output(ah, AR9300_EXT_LNA_CTL_GPIO_AR9485,
+				    AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED);
+
+	value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
 
 	if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) {
 		REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM,
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -351,6 +351,8 @@
 
 #define AR_PHY_CCA_NOM_VAL_9330_2GHZ          -118
 
+#define AR9300_EXT_LNA_CTL_GPIO_AR9485 9
+
 /*
  * AGC Field Definitions
  */


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/