[PATCH 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy
From: Kishon Vijay Abraham I
Date: Fri Jul 26 2013 - 05:04:32 EST
Previously MUSB wrapper (OMAP) device used PLATFORM_DEVID_AUTO while creating
MUSB core device. So in usb_bind_phy (binds the controller with the PHY), the
device name of the controller had *.auto* in it. Since with using
PLATFORM_DEVID_AUTO, there is no way to know the exact device name in advance,
the data given in usb_bind_phy became obsolete and usb_get_phy was failing.
So MUSB wrapper was modified not to use PLATFORM_DEVID_AUTO. Corresponding
change is done in board file here.
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
arch/arm/mach-omap2/board-2430sdp.c | 2 +-
arch/arm/mach-omap2/board-3430sdp.c | 2 +-
arch/arm/mach-omap2/board-cm-t35.c | 2 +-
arch/arm/mach-omap2/board-devkit8000.c | 2 +-
arch/arm/mach-omap2/board-igep0020.c | 2 +-
arch/arm/mach-omap2/board-ldp.c | 2 +-
arch/arm/mach-omap2/board-omap3beagle.c | 2 +-
arch/arm/mach-omap2/board-omap3evm.c | 2 +-
arch/arm/mach-omap2/board-omap3logic.c | 2 +-
arch/arm/mach-omap2/board-omap3pandora.c | 2 +-
arch/arm/mach-omap2/board-omap3stalker.c | 2 +-
arch/arm/mach-omap2/board-omap3touchbook.c | 2 +-
arch/arm/mach-omap2/board-overo.c | 2 +-
arch/arm/mach-omap2/board-rm680.c | 2 +-
arch/arm/mach-omap2/board-rx51.c | 2 +-
arch/arm/mach-omap2/board-zoom-peripherals.c | 2 +-
16 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 244d8a5..17bb076 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -233,7 +233,7 @@ static void __init omap_2430sdp_init(void)
omap_hsmmc_init(mmc);
omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb");
usb_musb_init(NULL);
board_smc91x_init();
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 23b004a..5f43fc4 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -590,7 +590,7 @@ static void __init omap_3430sdp_init(void)
omap_ads7846_init(1, gpio_pendown, 310, NULL);
omap_serial_init();
omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb");
usb_musb_init(NULL);
board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index d4622ed..1c3345d 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -691,7 +691,7 @@ static void __init cm_t3x_common_init(void)
cm_t35_init_display();
omap_twl4030_audio_init("cm-t3x", NULL);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb");
usb_musb_init(NULL);
cm_t35_init_usbh();
cm_t35_init_camera();
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index f1d91ba..b4d57ec 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -594,7 +594,7 @@ static void __init devkit8000_init(void)
omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
board_nand_init(devkit8000_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 87e65dd..b1cbbba 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -659,7 +659,7 @@ static void __init igep_init(void)
omap_serial_init();
omap_sdrc_init(m65kxxxxam_sdrc_params,
m65kxxxxam_sdrc_params);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb");
usb_musb_init(NULL);
igep_flash_init();
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 62e4f70..02d7505 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -377,7 +377,7 @@ static void __init omap_ldp_init(void)
omap_ads7846_init(1, 54, 310, NULL);
omap_serial_init();
omap_sdrc_init(NULL, NULL);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb");
usb_musb_init(NULL);
board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
ZOOM_NAND_CS, 0, nand_default_timings);
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 04c1165..c9e6fc6 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -551,7 +551,7 @@ static void __init omap3_beagle_init(void)
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 8c02626..daabe0c 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -706,7 +706,7 @@ static void __init omap3_evm_init(void)
omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
phy_data[0].reset_gpio = 135;
}
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb");
usb_musb_init(&musb_board_data);
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index bab51e6..d9a6c38 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -216,7 +216,7 @@ static void __init omap3logic_init(void)
board_mmc_init();
board_smsc911x_init();
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb");
usb_musb_init(NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index b1547a0..fc5c133 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -611,7 +611,7 @@ static void __init omap3pandora_init(void)
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb");
usb_musb_init(NULL);
gpmc_nand_init(&pandora_nand_data, NULL);
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index d37e6b1..44a38d4 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -394,7 +394,7 @@ static void __init omap3_stalker_init(void)
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 7da48bc..e8e053d 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -367,7 +367,7 @@ static void __init omap3_touchbook_init(void)
/* Touchscreen and accelerometer */
omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 5748b5d..1ea764d 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -473,7 +473,7 @@ static void __init overo_init(void)
mt46h32m32lf6_sdrc_params);
board_nand_init(overo_nand_partitions,
ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 345e8c4..d95d219 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -135,7 +135,7 @@ static void __init rm680_init(void)
sdrc_params = nokia_get_sdram_timings();
omap_sdrc_init(sdrc_params, sdrc_params);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb");
usb_musb_init(NULL);
rm680_peripherals_init();
}
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index d2ea68e..4deacd5 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -99,7 +99,7 @@ static void __init rx51_init(void)
sdrc_params = nokia_get_sdram_timings();
omap_sdrc_init(sdrc_params, sdrc_params);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb");
usb_musb_init(&musb_board_data);
rx51_peripherals_init();
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index a90375d..474ad1c 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -353,7 +353,7 @@ void __init zoom_peripherals_init(void)
omap_i2c_init();
pwm_add_table(zoom_pwm_lookup, ARRAY_SIZE(zoom_pwm_lookup));
platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb");
usb_musb_init(NULL);
enable_board_wakeup_source();
omap_serial_init();
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/