Re: [PATCH 14/16] usb: musb: dsps: add MUSB_DEVCTL_SESSION back after removal

[Bin Liu]

On Fri, Jul 26, 2013 at 12:53 PM, Bin Liu <binmlist@xxxxxxxxx> wrote:
> Sebastian,
>
> On Fri, Jul 26, 2013 at 11:31 AM, Sebastian Andrzej Siewior
> <bigeasy@xxxxxxxxxxxxx> wrote:
>> * Bin Liu | 2013-07-23 13:55:27 [-0500]:
>>
>>>Hi Sebastian,
>> Hi Bin,
>>
>>>either by SRP or HNP, or something else. In TI 3.2 kernel, there is
>>>workaround in otg_timer() to _toggle_ the SESSION bit to detect if ID
>>>pin is grounded, which means a USB device is connected.
>>
>> I've been looking at
>>   http://downloads.ti.com/sitara_linux/esd/AM335xSDK/latest/index_FDS.html
>>
>> and I can't find what you are talking about. My MUSB_DEVCTL doesn't
>> change after I connect a device and the SESSION bit is not set. Also I
>> remain in a_idle state. Do you have maybe a hint for me? :)
>
> In TI 3.2 kernel, the otg_timer() toggles the SESSION bit in
> OTG_STATE_B_IDLE state. So whenever the ID pin is grounded by
> connecting a device, the controller will try go into host mode.
> But I have no idea why your board is in a_idle not b_idle. The toggle
> does not handle a_idle.
>
> Do you use the AM335x GP EVM, not the smaller StarterKit EVM, right?
> the USB0 port on SK EVM is device only.
>
> But anyway, I have not seen any use case which uses micro-AB
> receptacle and requires such dynamic role switching. So I kind of

I meant the real customer use cases, not the EVMs ;)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/