Re: [SCSI REGRESSION] 3.10.2 or 3.10.3: arcmsr failure at bootup/ early userspace transition

[Bernd Schubert]

On 07/30/2013 01:34 AM, Martin K. Petersen wrote:
> > > > > > "Nix" == Nix  <nix@xxxxxxxxxxxxx> writes:
>
> Bernd,
>
> Nix> I can now confirm that reverting this commit causes this problem to
> Nix> go away, and my machine boots fine again.
>
> Can you please send me the output of sq_inq with your 1.49 firmware?
>
> I made a tweak that allowed Nix to boot but we're trying to find a good
> blacklist trigger. And that's tricky given that Areca allows you
> manually specify the SCSI model string for each volume...

Sorry it got a bit late today.

Here it is.

> (wheezy)fslab1:~# sg_inq -v /dev/sdc
>     inquiry cdb: 12 00 00 00 24 00
> standard INQUIRY:
>     inquiry cdb: 12 00 00 00 60 00
>   PQual=0  Device_type=0  RMB=0  version=0x05  [SPC-3]
>   [AERC=0]  [TrmTsk=0]  NormACA=0  HiSUP=0  Resp_data_format=2
>   SCCS=0  ACC=0  TPGS=0  3PC=0  Protect=0  BQue=0
>   EncServ=0  MultiP=0  [MChngr=0]  [ACKREQQ=0]  Addr16=1
>   [RelAdr=0]  WBus16=1  Sync=0  Linked=0  [TranDis=0]  CmdQue=1
>   [SPI: Clocking=0x3  QAS=0  IUS=0]
>     length=96 (0x60)   Peripheral device type: disk
>  Vendor identification: Hitachi
>  Product identification: HDS724040KLSA80
>  Product revision level: R001
>     inquiry cdb: 12 01 00 00 fc 00
>     inquiry cdb: 12 01 80 00 fc 00
>  Unit serial number: KRFS2CRAHXJZVD

Besides the firmware, the difference might be that I'm exporting single 
disks without any areca-raidset in between.
I can try to confirm that tomorrow, I just need the system as it is till 
tomorrow noon.


Cheers,
Bernd
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/