Re: [PATCH v2 2/4] gpio: add LP3943 I2C GPIO expander driver

[Lee Jones]

On Wed, 07 Aug 2013, Linus Walleij wrote:

> On Tue, Jul 30, 2013 at 2:42 AM, Kim, Milo <Milo.Kim@xxxxxx> wrote:
> 
> > This is one of LP3943 MFD driver.
> > LP3943 is configurable as a GPIO expander, up to 16 GPIOs.
> >
> > * Application note: how to configure LP3943 as a GPIO expander
> >   http://www.ti.com/lit/an/snva287a/snva287a.pdf
> >
> > * Supported GPIO controller operations
> >   request, free, direction_input, direction_output, get and set
> >
> > * GPIO direction register not supported
> >   LP3943 doesn't have the GPIO direction register. It only provides input and
> >   output status registers.
> >   So, private data for the direction should be handled manually.
> >   This variable is updated whenever the direction is changed and
> >   used in 'get' operation.
> >
> > * Pin assignment
> >   A driver data, 'pin_used' is checked when a GPIO is requested.
> >   If the GPIO is already assigned, then returns as failure.
> >   If the GPIO is available, 'pin_used' is set.
> >   When the GPIO is not used anymore, then it is cleared.
> >   It is defined as unsigned long type for atomic bit operation APIs,
> >   but only LSB 16bits are used because LP3943 has 16 outputs.
> >
> > Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
> > Signed-off-by: Milo Kim <milo.kim@xxxxxx>
> > ---
> > * Patch v2
> >   Use bitops macros for bit manipulations.
> >   Support device tree structure for the GPIO controller.
> >   Add request() and free() for the pin assignment.
> 
> This adresses all my concerns, nice driver.
> Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> 
> I guess this will be merged through the MFD tree along
> with the MFD core patch? That needs to go in first anyway.

That's fine, but first:

1/4 Needs Linus to review
4/4 Needs Thierry's PWM Ack

After that please send v3 with Linus' Rev-By on this patch.

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/