[PATCH v3] arm: omap5: dts: add palmas-usb node
From: Kishon Vijay Abraham I
Date: Mon Aug 12 2013 - 06:18:43 EST
From: Felipe Balbi <balbi@xxxxxx>
Without this node, there will be no palmas
driver to notify dwc3 that a cable has
been connected and, without that, dwc3
will never initialize.
[ kishon@xxxxxx : fix vbus-supply value after SMPS10 is modeled as 2 regulators]
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
Change from v2:
fix vbus-supply value after SMPS10 is modeled as 2 regulators. This is needed
after SMPS10 is modeled as 2 regulators.
[1] models SMPS10 as 2 regulators.
[2] splits the SMPS10 node into two to represent the 2 regulators.
[1] -> http://comments.gmane.org/gmane.linux.kernel/1542521
[2] -> http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg93779.html
arch/arm/boot/dts/omap5-uevm.dts | 10 ++++++++++
arch/arm/boot/dts/omap5.dtsi | 2 +-
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 08b7267..51a4acc 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -272,6 +272,11 @@
interrupt-controller;
#interrupt-cells = <2>;
+ extcon_usb3: palmas_usb {
+ compatible = "ti,palmas-usb";
+ ti,wakeup;
+ };
+
palmas_pmic {
compatible = "ti,palmas-pmic";
interrupt-parent = <&palmas>;
@@ -450,6 +455,11 @@
phys = <0 &hsusb2_phy &hsusb3_phy>;
};
+&usb3 {
+ extcon = <&extcon_usb3>;
+ vbus-supply = <&smps10_out1_reg>;
+};
+
&mcspi1 {
};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 4e41409..1659246 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -634,7 +634,7 @@
ti,type = <2>;
};
- omap_dwc3@4a020000 {
+ usb3: omap_dwc3@4a020000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss";
reg = <0x4a020000 0x10000>;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/