Re: linux-next: Tree for Aug 13 [ screen corruption in graphical mode ]

[Sedat Dilek]

On Tue, Aug 13, 2013 at 11:10 AM, Sedat Dilek <sedat.dilek@xxxxxxxxx> wrote:
> On Tue, Aug 13, 2013 at 10:28 AM, Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx> wrote:
>> Hi all,
>>
>> Changes since 20130812:
>>
>> The ext4 tree gained a conflict against Linus' tree.
>>
>> The infiniband tree gained a build failure for which I applied a merge
>> fix patch and another so I used the version from next-20130812.
>>
>> The tty tree gained conflicts against the devicetree and tile trees.
>>
>> The usb tree gained a conflict against the net-next tree.
>>
>> The usb-gadget tree gained a build failure for which I reverted a commit.
>>
>> The ptr-ret tree gained a conflict against the staging tree.
>>
>> The akpm tree gained a conflict against the staging tree.
>>
>> ----------------------------------------------------------------------------
>>
>
> Hi,
>
> with today's next-20130813 I cannot see 1/10 of my desktop-screen's
> top, it's simply black.
> I can estimate the URL line in Firefox (or open a new tab blindly and
> get a known URL from my autocompleted history).
>
> My Xorg stack did not change: libdrm-2.4.46 | mesa-9.16 | intel-ddx-2.4.14.
> next-20130808 was OK - no screen corruptions.
>
> Any idea, hint?
>
> - Sedat -

[ From my dmesg ]

[   28.026524] ------------[ cut here ]------------
[   28.026557] WARNING: CPU: 3 PID: 639 at
drivers/gpu/drm/i915/i915_gem.c:3435
i915_gem_object_set_cache_level+0x389/0x3a0 [i915]()
[   28.026560] Modules linked in: arc4 snd_hwdep i915(+) iwldvm
snd_pcm snd_page_alloc mac80211 snd_seq_midi parport_pc
snd_seq_midi_event rfcomm bnep snd_rawmidi ppdev uvcvideo snd_seq
btusb videobuf2_vmalloc i2c_algo_bit psmouse iwlwifi drm_kms_helper
videobuf2_memops snd_timer drm snd_seq_device videobuf2_core bluetooth
videodev serio_raw snd cfg80211 samsung_laptop wmi soundcore lp
mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169
mii
[   28.026610] CPU: 3 PID: 639 Comm: modprobe Not tainted
3.11.0-rc5-next20130813-1-iniza-small #1
[   28.026613] Hardware name: SAMSUNG ELECTRONICS CO., LTD.
530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[   28.026616]  0000000000000d6b ffff8800795535a8 ffffffff816e259a
0000000000000007
[   28.026622]  0000000000000000 ffff8800795535e8 ffffffff810661dc
ffffffff81376e70
[   28.026627]  ffff8800746ba200 ffff8800746ba2b8 ffff88007a2c7000
0000000000000041
[   28.026632] Call Trace:
[   28.026641]  [<ffffffff816e259a>] dump_stack+0x46/0x58
[   28.026647]  [<ffffffff810661dc>] warn_slowpath_common+0x8c/0xc0
[   28.026653]  [<ffffffff81376e70>] ? sg_kfree+0x30/0x30
[   28.026658]  [<ffffffff8106622a>] warn_slowpath_null+0x1a/0x20
[   28.026680]  [<ffffffffa03e1fe9>]
i915_gem_object_set_cache_level+0x389/0x3a0 [i915]
[   28.026684]  [<ffffffff8137723f>] ? sg_alloc_table+0x1f/0x50
[   28.026703]  [<ffffffffa03e2162>]
i915_gem_object_pin_to_display_plane+0x62/0x1c0 [i915]
[   28.026727]  [<ffffffffa03f9b10>]
intel_pin_and_fence_fb_obj+0xc0/0x140 [i915]
[   28.026732]  [<ffffffff816e82ee>] ? mutex_lock+0x1e/0x40
[   28.026761]  [<ffffffffa0424277>] intelfb_create+0x107/0x510 [i915]
[   28.026778]  [<ffffffffa020f807>] ? drm_mode_create+0x47/0x70 [drm]
[   28.026786]  [<ffffffffa01a404e>]
drm_fb_helper_initial_config+0x2fe/0x550 [drm_kms_helper]
[   28.026813]  [<ffffffffa0431323>] ? i915_write32+0xc3/0x190 [i915]
[   28.026838]  [<ffffffffa0424751>] intel_fbdev_initial_config+0x21/0x30 [i915]
[   28.026859]  [<ffffffffa03cb38d>] i915_driver_load+0xe9d/0xed0 [i915]
[   28.026876]  [<ffffffffa020aad1>] drm_get_pci_dev+0x181/0x2a0 [drm]
[   28.026881]  [<ffffffff8137b12d>] ? do_raw_spin_unlock+0x5d/0xb0
[   28.026900]  [<ffffffffa03c75d6>] i915_pci_probe+0x36/0x70 [i915]
[   28.026905]  [<ffffffff81399ceb>] local_pci_probe+0x4b/0x80
[   28.026910]  [<ffffffff8139b5c1>] pci_device_probe+0x101/0x120
[   28.026915]  [<ffffffff81478a1b>] driver_probe_device+0x7b/0x240
[   28.026920]  [<ffffffff81478c8b>] __driver_attach+0xab/0xb0
[   28.026924]  [<ffffffff81478be0>] ? driver_probe_device+0x240/0x240
[   28.026928]  [<ffffffff81476b6e>] bus_for_each_dev+0x5e/0x90
[   28.026932]  [<ffffffff8147851e>] driver_attach+0x1e/0x20
[   28.026936]  [<ffffffff81477fc4>] bus_add_driver+0x104/0x2a0
[   28.026941]  [<ffffffff814793f4>] driver_register+0x64/0xf0
[   28.026946]  [<ffffffff8139a544>] __pci_register_driver+0x64/0x70
[   28.026951]  [<ffffffffa0475000>] ? 0xffffffffa0474fff
[   28.026963]  [<ffffffffa020ad0a>] drm_pci_init+0x11a/0x130 [drm]
[   28.026968]  [<ffffffffa0475000>] ? 0xffffffffa0474fff
[   28.026987]  [<ffffffffa0475066>] i915_init+0x66/0x68 [i915]
[   28.026992]  [<ffffffff8100207e>] do_one_initcall+0x4e/0x180
[   28.026997]  [<ffffffff81058413>] ? set_memory_nx+0x43/0x50
[   28.027003]  [<ffffffff810d147c>] load_module+0x209c/0x25b0
[   28.027007]  [<ffffffff810ce0a0>] ? show_initstate+0x50/0x50
[   28.027013]  [<ffffffff810d1a3c>] SyS_init_module+0xac/0xd0
[   28.027018]  [<ffffffff816f41ef>] tracesys+0xe1/0xe6
[   28.027022] ---[ end trace be830cf8c302dde8 ]---


- Sedat -
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.11.0-rc5-next20130813-1-iniza-small (sedat.dilek@xxxxxxxxx@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Tue Aug 13 10:49:01 CEST 2013
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask FE0000000 write-back
[    0.000000]   6 base 11FE00000 mask FFFE00000 uncachable
[    0.000000]   7 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x0204c000, 0x0204cfff] PGTABLE
[    0.000000] BRK [0x0204d000, 0x0204dfff] PGTABLE
[    0.000000] BRK [0x0204e000, 0x0204efff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff]
[    0.000000]  [mem 0x11fc00000-0x11fdfffff] page 2M
[    0.000000] BRK [0x0204f000, 0x0204ffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff]
[    0.000000]  [mem 0x11c000000-0x11fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff]
[    0.000000]  [mem 0x40200000-0xd9bfffff] page 2M
[    0.000000]  [mem 0xd9c00000-0xd9c9efff] page 4k
[    0.000000] BRK [0x02050000, 0x02050fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[    0.000000]  [mem 0xdafff000-0xdaffffff] page 4k
[    0.000000] RAMDISK: [mem 0x37962000-0x37ca8fff]
[    0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[    0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD  SNB-CPT 00000000 INTL 20061109)
[    0.000000] ACPI: FACS 00000000daf47000 00040
[    0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[    0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000dafea000 00996 (v01  PmRef    CpuPm 00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL      COMBUF 00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01   Iffs  IffsAsl 00003000 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff]
[    0.000000]   NODE_DATA [mem 0x11fdf7000-0x11fdfbfff]
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x11fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xd9c9efff]
[    0.000000]   node   0: [mem 0xdafff000-0xdaffffff]
[    0.000000]   node   0: [mem 0x100000000-0x11fdfffff]
[    0.000000] On node 0 totalpages: 1021500
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12127 pages used for memmap
[    0.000000]   DMA32 zone: 886944 pages, LIFO batch:31
[    0.000000]   Normal zone: 1785 pages used for memmap
[    0.000000]   Normal zone: 130560 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd9c9f000-0xdae7efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdae7f000-0xdaf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s87424 r8192 d23168 u262144
[    0.000000] pcpu-alloc: s87424 r8192 d23168 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1007376
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3938460K/4086000K available (7136K kernel code, 1047K rwdata, 3140K rodata, 1332K init, 1984K bss, 147540K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] ODEBUG: 0 of 0 active objects replaced
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1596.452 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.90 BogoMIPS (lpj=6385808)
[    0.000081] pid_max: default: 32768 minimum: 301
[    0.000244] Security Framework initialized
[    0.000290] AppArmor: AppArmor initialized
[    0.000326] Yama: becoming mindful.
[    0.000750] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001860] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002363] Mount-cache hash table entries: 256
[    0.002927] Initializing cgroup subsys memory
[    0.003025] Initializing cgroup subsys devices
[    0.003064] Initializing cgroup subsys freezer
[    0.003104] Initializing cgroup subsys blkio
[    0.003141] Initializing cgroup subsys perf_event
[    0.003179] Initializing cgroup subsys hugetlb
[    0.003267] Disabled fast string operations
[    0.003305] CPU: Physical Processor ID: 0
[    0.003340] CPU: Processor Core ID: 0
[    0.003379] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.003379] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.003445] mce: CPU supports 7 MCE banks
[    0.003496] CPU0: Thermal monitoring enabled (TM1)
[    0.003542] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.003542] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.003542] tlb_flushall_shift: 5
[    0.003717] Freeing SMP alternatives memory: 24K (ffffffff81e54000 - ffffffff81e5a000)
[    0.004796] ACPI: Core revision 20130725
[    0.015550] ACPI: All ACPI Tables successfully acquired
[    0.029523] ftrace: allocating 27134 entries in 106 pages
[    0.044282] Enabling x2apic
[    0.044320] Enabled x2apic
[    0.044384] Switched APIC routing to physical x2apic.
[    0.045360] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.085058] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
[    0.085172] TSC deadline timer enabled
[    0.085184] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.085333] ... version:                3
[    0.085369] ... bit width:              48
[    0.085405] ... generic registers:      4
[    0.085441] ... value mask:             0000ffffffffffff
[    0.085479] ... max period:             0000ffffffffffff
[    0.085517] ... fixed-purpose events:   3
[    0.085553] ... event mask:             000000070000000f
[    0.098548] Disabled fast string operations
[    0.101728] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.113311] Disabled fast string operations
[    0.126924] Disabled fast string operations
[    0.087570] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.129047] Brought up 4 CPUs
[    0.129149] smpboot: Total of 4 processors activated (12771.61 BogoMIPS)
[    0.133206] devtmpfs: initialized
[    0.135228] EVM: security.selinux
[    0.135264] EVM: security.SMACK64
[    0.135298] EVM: security.capability
[    0.135419] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
[    0.136964] regulator-dummy: no parameters
[    0.137151] NET: Registered protocol family 16
[    0.137493] cpuidle: using governor ladder
[    0.137530] cpuidle: using governor menu
[    0.137604] ACPI: bus type PCI registered
[    0.137752] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.137812] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.144793] PCI: Using configuration type 1 for base access
[    0.148148] bio: create slab <bio-0> at 0
[    0.148604] ACPI: Added _OSI(Module Device)
[    0.148642] ACPI: Added _OSI(Processor Device)
[    0.148678] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.148716] ACPI: Added _OSI(Processor Aggregator Device)
[    0.150579] ACPI: EC: Look up EC in DSDT
[    0.176807] ACPI: Executed 1 blocks of module-level executable AML code
[    0.182792] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.195466] ACPI: SSDT 00000000dae70718 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.196084] ACPI: Dynamic OEM Table Load:
[    0.196154] ACPI: SSDT           (null) 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.209302] ACPI: SSDT 00000000dae71a98 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.209984] ACPI: Dynamic OEM Table Load:
[    0.210054] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.221433] ACPI: SSDT 00000000dae6fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.222008] ACPI: Dynamic OEM Table Load:
[    0.222078] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.235229] ACPI: Interpreter enabled
[    0.235280] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[    0.235381] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130725/hwxface-571)
[    0.235478] ACPI: (supports S0 S1 S3 S5)
[    0.235514] ACPI: Using IOAPIC for interrupt routing
[    0.235612] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.235901] ACPI: No dock devices found.
[    0.259678] ACPI: Power Resource [FN00] (off)
[    0.259899] ACPI: Power Resource [FN01] (off)
[    0.260115] ACPI: Power Resource [FN02] (off)
[    0.260331] ACPI: Power Resource [FN03] (off)
[    0.260551] ACPI: Power Resource [FN04] (off)
[    0.261744] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.262118] \_SB_.PCI0:_OSC invalid UUID
[    0.262119] _OSC request data:1 8 0 
[    0.263025] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.263138] PCI host bridge to bus 0000:00
[    0.263177] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.263217] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.263258] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.263299] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.263341] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[    0.263383] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.263439] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.263592] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.263605] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.263613] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.263618] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.263801] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.263829] pci 0000:00:16.0: reg 0x10: [mem 0xf0705000-0xf070500f 64bit]
[    0.263914] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.264070] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.264095] pci 0000:00:1a.0: reg 0x10: [mem 0xf070a000-0xf070a3ff]
[    0.264196] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.264340] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.264360] pci 0000:00:1b.0: reg 0x10: [mem 0xf0700000-0xf0703fff 64bit]
[    0.264439] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.264522] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.264626] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.264716] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.264806] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.264913] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.265003] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.265090] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.265194] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.265289] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.265442] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.265467] pci 0000:00:1d.0: reg 0x10: [mem 0xf0709000-0xf07093ff]
[    0.265568] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.265710] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.265954] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.265976] pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
[    0.265986] pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
[    0.265995] pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
[    0.266006] pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
[    0.266016] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.266026] pci 0000:00:1f.2: reg 0x24: [mem 0xf0708000-0xf07087ff]
[    0.266078] pci 0000:00:1f.2: PME# supported from D3hot
[    0.266211] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.266229] pci 0000:00:1f.3: reg 0x10: [mem 0xf0704000-0xf07040ff 64bit]
[    0.266253] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.266636] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
[    0.266816] pci 0000:01:00.0: reg 0x10: [mem 0xf0600000-0xf0601fff 64bit]
[    0.267545] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.267715] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.273388] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.273433] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.273600] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.273672] pci 0000:02:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.273790] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref]
[    0.273867] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref]
[    0.274200] pci 0000:02:00.0: supports D1 D2
[    0.274202] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.274324] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.281325] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.281386] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.281395] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.281521] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.281559] pci 0000:03:00.0: reg 0x10: [mem 0xf0500000-0xf0507fff 64bit]
[    0.281758] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.289296] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.289372] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.289554] \_SB_.PCI0:_OSC invalid UUID
[    0.289555] _OSC request data:1 1f 0 
[    0.289560] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.289616] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.290531] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.290878] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.291270] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.291615] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.291960] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.292332] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.292723] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.293070] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.293958] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.294036] ACPI: \_SB_.PCI0: notify handler is installed
[    0.294101] Found 1 acpi root devices
[    0.294171] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.294457] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.294515] vgaarb: loaded
[    0.294549] vgaarb: bridge control possible 0000:00:02.0
[    0.295260] SCSI subsystem initialized
[    0.295297] ACPI: bus type ATA registered
[    0.295448] libata version 3.00 loaded.
[    0.295510] ACPI: bus type USB registered
[    0.295592] usbcore: registered new interface driver usbfs
[    0.295653] usbcore: registered new interface driver hub
[    0.295745] usbcore: registered new device driver usb
[    0.296130] PCI: Using ACPI for IRQ routing
[    0.297841] PCI: pci_cache_line_size set to 64 bytes
[    0.297953] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.297956] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
[    0.297958] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.297960] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[    0.298203] NetLabel: Initializing
[    0.298238] NetLabel:  domain hash size = 128
[    0.298275] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.298358] NetLabel:  unlabeled traffic allowed by default
[    0.298485] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.298676] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.300737] Switched to clocksource hpet
[    0.318373] AppArmor: AppArmor Filesystem Enabled
[    0.318462] pnp: PnP ACPI init
[    0.318513] ACPI: bus type PNP registered
[    0.318901] pnp 00:00: [dma 4]
[    0.318943] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.318987] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.319153] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.319211] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.319288] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.319331] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.319372] system 00:04: [io  0x5000-0x5003] has been reserved
[    0.319413] system 00:04: [io  0xffff] has been reserved
[    0.319452] system 00:04: [io  0x0400-0x0453] could not be reserved
[    0.319494] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.319534] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.319574] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.319615] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.319656] system 00:04: [io  0x5000-0x500f] could not be reserved
[    0.319698] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.319745] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.319839] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.319881] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.319942] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.320023] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[    0.320336] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.320379] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.320421] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.320463] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.320505] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.320546] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.320588] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.320630] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.320672] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.320715] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.320768] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.321476] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.321516] pnp: PnP ACPI: found 11 devices
[    0.321553] ACPI: bus type PNP unregistered
[    0.329613] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.329658] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.329708] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.329748] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.329796] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.329857] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.329899] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.330369] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.330372] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.330374] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.330376] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[    0.330377] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.330380] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[    0.330382] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.330384] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.330386] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.330522] NET: Registered protocol family 2
[    0.330932] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.331170] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.331486] TCP: Hash tables configured (established 32768 bind 32768)
[    0.331786] TCP: reno registered
[    0.331839] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[    0.331944] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[    0.332240] NET: Registered protocol family 1
[    0.332297] pci 0000:00:02.0: Boot video device
[    0.333082] PCI: CLS 64 bytes, default 64
[    0.333292] Trying to unpack rootfs image as initramfs...
[    0.409698] Freeing initrd memory: 3356K (ffff880037962000 - ffff880037ca9000)
[    0.409758] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.409800] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff]
[    0.410227] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[    0.410275] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[    0.410326] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[    0.410377] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[    0.410999] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[    0.411057] Scanning for low memory corruption every 60 seconds
[    0.411691] Initialise module verification
[    0.411792] audit: initializing netlink socket (disabled)
[    0.411850] type=2000 audit(1376391661.400:1): initialized
[    0.442095] bounce pool size: 64 pages
[    0.442158] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.442878] VFS: Disk quotas dquot_6.5.2
[    0.442956] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.443825] fuse init (API version 7.22)
[    0.443970] msgmni has been set to 7698
[    0.444707] Key type asymmetric registered
[    0.444745] Asymmetric key parser 'x509' registered
[    0.444832] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.444946] io scheduler noop registered
[    0.444984] io scheduler deadline registered (default)
[    0.445058] io scheduler cfq registered
[    0.445471] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.445551] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.445739] intel_idle: MWAIT substates: 0x21120
[    0.445740] intel_idle: v0.4 model 0x2A
[    0.445742] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.446517] ACPI: AC Adapter [ADP1] (on-line)
[    0.446841] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.447115] ACPI: Lid Switch [LID0]
[    0.447223] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.447283] ACPI: Power Button [PWRB]
[    0.447383] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.447439] ACPI: Power Button [PWRF]
[    0.447573] ACPI: Fan [FAN0] (off)
[    0.447661] ACPI: Fan [FAN1] (off)
[    0.447743] ACPI: Fan [FAN2] (off)
[    0.447827] ACPI: Fan [FAN3] (off)
[    0.447913] ACPI: Fan [FAN4] (off)
[    0.448032] ACPI: Requesting acpi_cpufreq
[    0.451434] thermal LNXTHERM:00: registered as thermal_zone0
[    0.451476] ACPI: Thermal Zone [TZ00] (67 C)
[    0.451934] thermal LNXTHERM:01: registered as thermal_zone1
[    0.451974] ACPI: Thermal Zone [TZ01] (30 C)
[    0.452069] GHES: HEST is not enabled!
[    0.452326] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.456257] Linux agpgart interface v0.103
[    0.458931] ACPI: Battery Slot [BAT1] (battery present)
[    0.459212] brd: module loaded
[    0.460666] loop: module loaded
[    0.460925] mei_me 0000:00:16.0: setting latency timer to 64
[    0.460969] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[    0.464197] ahci 0000:00:1f.2: version 3.0
[    0.464353] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    0.464574] ahci: SSS flag set, parallel bus scan disabled
[    0.480653] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[    0.480718] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    0.480776] ahci 0000:00:1f.2: setting latency timer to 64
[    0.505648] scsi0 : ahci
[    0.506008] scsi1 : ahci
[    0.506261] scsi2 : ahci
[    0.506517] scsi3 : ahci
[    0.506780] scsi4 : ahci
[    0.507035] scsi5 : ahci
[    0.507163] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41
[    0.507225] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41
[    0.507278] ata3: DUMMY
[    0.507312] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41
[    0.507366] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41
[    0.507419] ata6: DUMMY
[    0.508320] libphy: Fixed MDIO Bus: probed
[    0.508652] tun: Universal TUN/TAP device driver, 1.6
[    0.508690] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[    0.508834] PPP generic driver version 2.4.2
[    0.509001] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.509042] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
[    0.509050] ehci-pci: EHCI PCI platform driver
[    0.509290] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.509300] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.509345] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.509418] ehci-pci 0000:00:1a.0: debug port 2
[    0.509459] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[    0.509462] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[    0.509498] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    0.513396] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.513398] ehci-pci 0000:00:1a.0: supports USB remote wakeup
[    0.513446] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000
[    0.513489] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[    0.524608] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.524710] usb usb1: default language 0x0409
[    0.524733] usb usb1: udev 1, busnum 1, minor = 0
[    0.524735] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.524777] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.524830] usb usb1: Product: EHCI Host Controller
[    0.524868] usb usb1: Manufacturer: Linux 3.11.0-rc5-next20130813-1-iniza-small ehci_hcd
[    0.524923] usb usb1: SerialNumber: 0000:00:1a.0
[    0.525111] usb usb1: usb_probe_device
[    0.525114] usb usb1: configuration #1 chosen from 1 choice
[    0.525129] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    0.525164] hub 1-0:1.0: usb_probe_interface
[    0.525166] hub 1-0:1.0: usb_probe_interface - got id
[    0.525169] hub 1-0:1.0: USB hub found
[    0.525215] hub 1-0:1.0: 2 ports detected
[    0.525251] hub 1-0:1.0: standalone hub
[    0.525253] hub 1-0:1.0: no power switching (usb 1.0)
[    0.525254] hub 1-0:1.0: individual port over-current protection
[    0.525256] hub 1-0:1.0: power on to power good time: 20ms
[    0.525268] hub 1-0:1.0: local power source is good
[    0.525324] hub 1-0:1.0: trying to enable port power on non-switchable hub
[    0.525597] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.525605] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.525650] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.525722] ehci-pci 0000:00:1d.0: debug port 2
[    0.525762] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[    0.525766] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[    0.525800] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    0.529679] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.529681] ehci-pci 0000:00:1d.0: supports USB remote wakeup
[    0.529729] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000
[    0.529772] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[    0.540597] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.540697] usb usb2: default language 0x0409
[    0.540718] usb usb2: udev 1, busnum 2, minor = 128
[    0.540721] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.540762] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.540816] usb usb2: Product: EHCI Host Controller
[    0.540854] usb usb2: Manufacturer: Linux 3.11.0-rc5-next20130813-1-iniza-small ehci_hcd
[    0.540909] usb usb2: SerialNumber: 0000:00:1d.0
[    0.541085] usb usb2: usb_probe_device
[    0.541088] usb usb2: configuration #1 chosen from 1 choice
[    0.541103] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[    0.541136] hub 2-0:1.0: usb_probe_interface
[    0.541138] hub 2-0:1.0: usb_probe_interface - got id
[    0.541141] hub 2-0:1.0: USB hub found
[    0.541186] hub 2-0:1.0: 2 ports detected
[    0.541222] hub 2-0:1.0: standalone hub
[    0.541224] hub 2-0:1.0: no power switching (usb 1.0)
[    0.541225] hub 2-0:1.0: individual port over-current protection
[    0.541227] hub 2-0:1.0: power on to power good time: 20ms
[    0.541238] hub 2-0:1.0: local power source is good
[    0.541289] hub 2-0:1.0: trying to enable port power on non-switchable hub
[    0.541376] ehci-platform: EHCI generic platform driver
[    0.541431] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.541471] ohci_hcd: block sizes: ed 80 td 96
[    0.541477] ohci-pci: OHCI PCI platform driver
[    0.541533] ohci-platform: OHCI generic platform driver
[    0.541585] uhci_hcd: USB Universal Host Controller Interface driver
[    0.541829] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.541874] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    0.551649] xhci_hcd 0000:03:00.0: supports USB remote wakeup
[    0.551686] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.551693] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[    0.551700] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[    0.551708] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[    0.551715] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[    0.552006] usb usb3: default language 0x0409
[    0.552030] usb usb3: udev 1, busnum 3, minor = 256
[    0.552032] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.552074] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.552127] usb usb3: Product: xHCI Host Controller
[    0.552166] usb usb3: Manufacturer: Linux 3.11.0-rc5-next20130813-1-iniza-small xhci_hcd
[    0.552221] usb usb3: SerialNumber: 0000:03:00.0
[    0.552378] usb usb3: usb_probe_device
[    0.552380] usb usb3: configuration #1 chosen from 1 choice
[    0.552386] xHCI xhci_add_endpoint called for root hub
[    0.552388] xHCI xhci_check_bandwidth called for root hub
[    0.552399] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[    0.552432] hub 3-0:1.0: usb_probe_interface
[    0.552434] hub 3-0:1.0: usb_probe_interface - got id
[    0.552436] hub 3-0:1.0: USB hub found
[    0.552486] hub 3-0:1.0: 2 ports detected
[    0.552523] hub 3-0:1.0: standalone hub
[    0.552524] hub 3-0:1.0: no power switching (usb 1.0)
[    0.552526] hub 3-0:1.0: individual port over-current protection
[    0.552527] hub 3-0:1.0: Single TT
[    0.552529] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    0.552530] hub 3-0:1.0: power on to power good time: 20ms
[    0.552542] hub 3-0:1.0: local power source is good
[    0.552602] hub 3-0:1.0: trying to enable port power on non-switchable hub
[    0.552678] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.552721] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    0.552781] xhci_hcd 0000:03:00.0: supports USB remote wakeup
[    0.552831] usb usb4: skipped 1 descriptor after endpoint
[    0.552840] usb usb4: default language 0x0409
[    0.552860] usb usb4: udev 1, busnum 4, minor = 384
[    0.552862] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.552903] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.552957] usb usb4: Product: xHCI Host Controller
[    0.552995] usb usb4: Manufacturer: Linux 3.11.0-rc5-next20130813-1-iniza-small xhci_hcd
[    0.553050] usb usb4: SerialNumber: 0000:03:00.0
[    0.553204] usb usb4: usb_probe_device
[    0.553206] usb usb4: configuration #1 chosen from 1 choice
[    0.553212] xHCI xhci_add_endpoint called for root hub
[    0.553214] xHCI xhci_check_bandwidth called for root hub
[    0.553225] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[    0.553254] hub 4-0:1.0: usb_probe_interface
[    0.553256] hub 4-0:1.0: usb_probe_interface - got id
[    0.553258] hub 4-0:1.0: USB hub found
[    0.553307] hub 4-0:1.0: 2 ports detected
[    0.553344] hub 4-0:1.0: standalone hub
[    0.553345] hub 4-0:1.0: no power switching (usb 1.0)
[    0.553347] hub 4-0:1.0: individual port over-current protection
[    0.553348] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    0.553350] hub 4-0:1.0: power on to power good time: 20ms
[    0.553361] hub 4-0:1.0: local power source is good
[    0.553397] hub 4-0:1.0: trying to enable port power on non-switchable hub
[    0.564663] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[    0.571028] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.571071] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.571370] mousedev: PS/2 mouse device common for all mice
[    0.571936] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.572011] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.572136] device-mapper: uevent: version 1.0.3
[    0.572294] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@xxxxxxxxxx
[    0.572356] Intel P-state driver initializing.
[    0.572405] Intel pstate controlling: cpu 0
[    0.572469] Intel pstate controlling: cpu 1
[    0.572556] Intel pstate controlling: cpu 2
[    0.572629] Intel pstate controlling: cpu 3
[    0.572741] ledtrig-cpu: registered to indicate activity on CPUs
[    0.573189] ashmem: initialized
[    0.573446] TCP: cubic registered
[    0.573820] NET: Registered protocol family 10
[    0.574436] NET: Registered protocol family 17
[    0.574495] Key type dns_resolver registered
[    0.575089] PM: Hibernation image not present or could not be loaded.
[    0.575101] Loading module verification certificates
[    0.576491] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: a3c76be8173410e8e2135ab2272e4aff37eef436'
[    0.576613] registered taskstats version 1
[    0.580128] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.580998] Key type trusted registered
[    0.588780] Key type encrypted registered
[    0.596562] rtc_cmos 00:05: setting system clock to 2013-08-13 11:01:02 UTC (1376391662)
[    0.597241] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.597291] EDD information not available.
[    0.624637] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
[    0.624661] hub 1-0:1.0: port 1: status 0501 change 0001
[    0.640635] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
[    0.640665] hub 2-0:1.0: port 1: status 0501 change 0001
[    0.652693] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    0.652722] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    0.652746] hub 3-0:1.0: hub_suspend
[    0.652781] usb usb3: bus auto-suspend, wakeup 1
[    0.652848] hub 4-0:1.0: hub_suspend
[    0.652861] usb usb4: bus auto-suspend, wakeup 1
[    0.661292] usb usb4: usb wakeup-resume
[    0.661304] usb usb4: usb auto-resume
[    0.672614] hub 4-0:1.0: hub_resume
[    0.672663] hub 4-0:1.0: port 1: status 0203 change 0001
[    0.724595] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
[    0.724706] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[    0.780708] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
[    0.780722] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    0.824498] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.825757] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[    0.825833] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.827269] ata1.00: configured for UDMA/133
[    0.827794] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[    0.828508] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.828580] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.828664] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.829108] sd 0:0:0:0: [sda] Write Protect is off
[    0.829180] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.829399] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.836564] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.839177]  sda: sda1 sda2 sda3
[    0.840508] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.892751] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
[    0.892767] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    0.968735] usb 1-1: udev 2, busnum 1, minor = 1
[    0.968747] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    0.968820] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.969250] usb 1-1: usb_probe_device
[    0.969260] usb 1-1: configuration #1 chosen from 1 choice
[    0.969592] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[    0.969678] hub 1-1:1.0: usb_probe_interface
[    0.969684] hub 1-1:1.0: usb_probe_interface - got id
[    0.969691] hub 1-1:1.0: USB hub found
[    0.969875] hub 1-1:1.0: 6 ports detected
[    0.969940] hub 1-1:1.0: standalone hub
[    0.969943] hub 1-1:1.0: individual port power switching
[    0.969947] hub 1-1:1.0: individual port over-current protection
[    0.969950] hub 1-1:1.0: Single TT
[    0.969954] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[    0.969958] hub 1-1:1.0: power on to power good time: 100ms
[    0.970438] hub 1-1:1.0: local power source is good
[    0.970956] hub 1-1:1.0: enabling power on all ports
[    0.972352] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
[    0.972386] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[    1.028654] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
[    1.028671] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    1.068607] hub 1-1:1.0: port 2: status 0101 change 0001
[    1.069365] hub 1-1:1.0: port 4: status 0101 change 0001
[    1.084316] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.140575] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
[    1.140592] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    1.148270] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.148937] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133
[    1.149015] ata2.00: 31277232 sectors, multi 1: LBA48 
[    1.149769] ata2.00: configured for UDMA/133
[    1.150312] scsi 1:0:0:0: Direct-Access     ATA      SanDisk iSSD P4  SSD  PQ: 0 ANSI: 5
[    1.150834] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    1.150891] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.151214] sd 1:0:0:0: [sdb] Write Protect is off
[    1.151284] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.151341] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.152767]  sdb: sdb1 sdb2
[    1.153797] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.168248] usb 1-1: link qh256-0001/ffff880037a68640 start 1 [1/0 us]
[    1.216558] usb 2-1: udev 2, busnum 2, minor = 129
[    1.216570] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.216644] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.217085] usb 2-1: usb_probe_device
[    1.217096] usb 2-1: configuration #1 chosen from 1 choice
[    1.217412] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[    1.217504] hub 2-1:1.0: usb_probe_interface
[    1.217509] hub 2-1:1.0: usb_probe_interface - got id
[    1.217517] hub 2-1:1.0: USB hub found
[    1.217698] hub 2-1:1.0: 6 ports detected
[    1.217762] hub 2-1:1.0: standalone hub
[    1.217766] hub 2-1:1.0: individual port power switching
[    1.217769] hub 2-1:1.0: individual port over-current protection
[    1.217773] hub 2-1:1.0: Single TT
[    1.217777] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
[    1.217780] hub 2-1:1.0: power on to power good time: 100ms
[    1.218260] hub 2-1:1.0: local power source is good
[    1.218923] hub 2-1:1.0: enabling power on all ports
[    1.220501] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000
[    1.220538] hub 4-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s
[    1.321191] hub 2-1:1.0: port 5: status 0101 change 0001
[    1.335779] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[    1.348739] usb 4-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
[    1.349212] usb 4-1: skipped 1 descriptor after endpoint
[    1.349221] usb 4-1: skipped 1 descriptor after endpoint
[    1.349366] usb 4-1: default language 0x0409
[    1.349719] usb 4-1: udev 2, busnum 4, minor = 385
[    1.349725] usb 4-1: New USB device found, idVendor=174c, idProduct=55aa
[    1.349798] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    1.349869] usb 4-1: Product: MEDION HDDrive-n-GO
[    1.349935] usb 4-1: Manufacturer: MEDION
[    1.349997] usb 4-1: SerialNumber: 3180000000000000092C
[    1.350379] usb 4-1: usb_probe_device
[    1.350386] usb 4-1: configuration #1 chosen from 1 choice
[    1.351396] usb 4-1: Successful Endpoint Configure command
[    1.351505] usb 4-1: adding 4-1:1.0 (config #1, interface 0)
[    1.351727] hub 1-1:1.0: state 7 ports 6 chg 0014 evt 0000
[    1.351851] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
[    1.408079] tsc: Refined TSC clocksource calibration: 1596.374 MHz
[    1.420096] usb 2-1: link qh256-0001/ffff880037a68340 start 1 [1/0 us]
[    1.420157] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.468043] ata4: SATA link down (SStatus 0 SControl 300)
[    1.515311] usb 1-1.2: skipped 1 descriptor after interface
[    1.515783] usb 1-1.2: default language 0x0409
[    1.518300] usb 1-1.2: udev 3, busnum 1, minor = 2
[    1.518312] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e
[    1.518388] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.518477] usb 1-1.2: Product: USB-PS/2 Optical Mouse
[    1.518543] usb 1-1.2: Manufacturer: Logitech
[    1.518970] usb 1-1.2: usb_probe_device
[    1.518980] usb 1-1.2: configuration #1 chosen from 1 choice
[    1.519537] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
[    1.519835] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
[    1.592054] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    1.787820] ata5: SATA link down (SStatus 0 SControl 300)
[    1.790610] Freeing unused kernel memory: 1332K (ffffffff81d07000 - ffffffff81e54000)
[    1.790699] Write protecting the kernel read-only data: 12288k
[    1.796197] Freeing unused kernel memory: 1044K (ffff8800016fb000 - ffff880001800000)
[    1.800842] Freeing unused kernel memory: 956K (ffff880001b11000 - ffff880001c00000)
[    1.829627] usb 1-1.4: skipped 1 descriptor after configuration
[    1.829636] usb 1-1.4: skipped 5 descriptors after interface
[    1.829644] usb 1-1.4: skipped 1 descriptor after endpoint
[    1.829650] usb 1-1.4: skipped 23 descriptors after interface
[    1.831764] usb 1-1.4: default language 0x0409
[    1.841644] udevd[121]: starting version 175
[    1.843726] usb 1-1.4: udev 4, busnum 1, minor = 3
[    1.843736] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018
[    1.843798] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.843866] usb 1-1.4: Product: WebCam SC-13HDL11431N
[    1.843919] usb 1-1.4: Manufacturer: 123
[    1.845660] usb 1-1.4: usb_probe_device
[    1.845667] usb 1-1.4: configuration #1 chosen from 1 choice
[    1.845839] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
[    1.993940] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.994027] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.994410] r8169 0000:02:00.0: irq 47 for MSI/MSI-X
[    1.999827] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47
[    1.999898] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.000424] usb-storage 4-1:1.0: usb_probe_interface
[    2.000431] usb-storage 4-1:1.0: usb_probe_interface - got id
[    2.000435] usb-storage 4-1:1.0: USB Mass Storage device detected
[    2.000623] scsi6 : usb-storage 4-1:1.0
[    2.001079] usbcore: registered new interface driver usb-storage
[    2.017803] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1)
[    2.017926] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0000
[    2.018094] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s
[    2.036522] hidraw: raw HID events driver (C) Jiri Kosina
[    2.039177] usbhid 1-1.2:1.0: usb_probe_interface
[    2.039181] usbhid 1-1.2:1.0: usb_probe_interface - got id
[    2.042750] usbcore: registered new interface driver usbhid
[    2.042791] usbhid: USB HID core driver
[    2.058964] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[    2.059359] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[    2.087742] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[    2.183871] usb 2-1.5: udev 3, busnum 2, minor = 130
[    2.183880] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
[    2.183941] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.184251] usb 2-1.5: usb_probe_device
[    2.184257] usb 2-1.5: configuration #1 chosen from 1 choice
[    2.184900] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0)
[    2.185139] usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1)
[    2.185422] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0010
[    2.185594] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0020
[    2.407409] Switched to clocksource tsc
[    2.846446] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[    2.999353] scsi 6:0:0:0: Direct-Access     ASMT     2105             0    PQ: 0 ANSI: 6
[    2.999964] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    3.000067] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    3.000611] sd 6:0:0:0: [sdc] Write Protect is off
[    3.000669] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    3.001125] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.002978]  sdc: sdc1 sdc2 sdc3
[    3.004701] sd 6:0:0:0: [sdc] Attached SCSI disk
[   26.083501] Adding 262140k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262140k FS
[   26.108475] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[   26.114168] udevd[615]: starting version 175
[   26.298719] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
[   26.298730] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   26.298737] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[   26.298742] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   26.298745] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[   26.298751] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   26.298754] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[   26.298759] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   26.298761] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   26.662684] lp: driver loaded but no devices found
[   26.756710] wmi: Mapper loaded
[   26.758325] samsung_laptop: detected SABI interface: SwSmi@
[   26.758332] samsung_laptop: Backlight controlled by ACPI video driver
[   26.795312] cfg80211: Calling CRDA to update world regulatory domain
[   26.811328] cfg80211: World regulatory domain updated:
[   26.811333] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   26.811337] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   26.811340] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   26.811343] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   26.811346] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   26.811349] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   26.866546] Linux video capture interface: v2.00
[   26.881559] Bluetooth: Core ver 2.16
[   26.885565] NET: Registered protocol family 31
[   26.885571] Bluetooth: HCI device and connection manager initialized
[   26.886110] Bluetooth: HCI socket layer initialized
[   26.886123] Bluetooth: L2CAP socket layer initialized
[   26.886148] Bluetooth: SCO socket layer initialized
[   26.932514] [drm] Initialized drm 1.1.0 20060810
[   27.043003] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[   27.043008] Copyright(c) 2003-2013 Intel Corporation
[   27.043267] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[   27.043560] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X
[   27.045028] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   27.084368] btusb 2-1.5:1.0: usb_probe_interface
[   27.084375] btusb 2-1.5:1.0: usb_probe_interface - got id
[   27.114058] usbcore: registered new interface driver btusb
[   27.119509] usb 2-1.5: link qh1-0e01/ffff8800d5546b40 start 0 [1/2 us]
[   27.134059] uvcvideo 1-1.4:1.0: usb_probe_interface
[   27.134067] uvcvideo 1-1.4:1.0: usb_probe_interface - got id
[   27.134119] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[   27.154857] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input5
[   27.155332] usbcore: registered new interface driver uvcvideo
[   27.155335] USB Video Class driver (1.1.1)
[   27.165594] usb 1-1.4: link qh16-0001/ffff8800794bf7c0 start 2 [1/0 us]
[   27.165661] usb 1-1.4: unlink qh16-0001/ffff8800794bf7c0 start 2 [1/0 us]
[   27.182233] ppdev: user-space parallel port driver
[   27.273288] type=1400 audit(1376384489.188:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=812 comm="apparmor_parser"
[   27.273481] type=1400 audit(1376384489.188:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=812 comm="apparmor_parser"
[   27.273676] type=1400 audit(1376384489.192:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=812 comm="apparmor_parser"
[   27.302637] type=1400 audit(1376384489.220:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=717 comm="apparmor_parser"
[   27.302846] type=1400 audit(1376384489.220:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=717 comm="apparmor_parser"
[   27.303023] type=1400 audit(1376384489.220:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=717 comm="apparmor_parser"
[   27.333915] init: failsafe main process (990) killed by TERM signal
[   27.368698] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   27.368703] Bluetooth: BNEP filters: protocol multicast
[   27.368721] Bluetooth: BNEP socket layer initialized
[   27.370210] Bluetooth: RFCOMM TTY layer initialized
[   27.370238] Bluetooth: RFCOMM socket layer initialized
[   27.370241] Bluetooth: RFCOMM ver 1.11
[   27.915422] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled
[   27.915428] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   27.915432] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   27.915436] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[   27.916161] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   27.950723] [drm] Memory usable by graphics device = 2048M
[   27.950735] i915 0000:00:02.0: setting latency timer to 64
[   27.958028] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[   27.973229] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[   27.995007] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[   27.995027] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   27.995029] [drm] Driver supports precise vblank timestamp query.
[   27.995315] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   28.007093] [drm] Wrong MCH_SSKPD value: 0x16040307
[   28.007098] [drm] This can cause pipe underruns and display issues.
[   28.007100] [drm] Please upgrade your BIOS to fix this.
[   28.023992] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   28.026524] ------------[ cut here ]------------
[   28.026557] WARNING: CPU: 3 PID: 639 at drivers/gpu/drm/i915/i915_gem.c:3435 i915_gem_object_set_cache_level+0x389/0x3a0 [i915]()
[   28.026560] Modules linked in: arc4 snd_hwdep i915(+) iwldvm snd_pcm snd_page_alloc mac80211 snd_seq_midi parport_pc snd_seq_midi_event rfcomm bnep snd_rawmidi ppdev uvcvideo snd_seq btusb videobuf2_vmalloc i2c_algo_bit psmouse iwlwifi drm_kms_helper videobuf2_memops snd_timer drm snd_seq_device videobuf2_core bluetooth videodev serio_raw snd cfg80211 samsung_laptop wmi soundcore lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii
[   28.026610] CPU: 3 PID: 639 Comm: modprobe Not tainted 3.11.0-rc5-next20130813-1-iniza-small #1
[   28.026613] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
[   28.026616]  0000000000000d6b ffff8800795535a8 ffffffff816e259a 0000000000000007
[   28.026622]  0000000000000000 ffff8800795535e8 ffffffff810661dc ffffffff81376e70
[   28.026627]  ffff8800746ba200 ffff8800746ba2b8 ffff88007a2c7000 0000000000000041
[   28.026632] Call Trace:
[   28.026641]  [<ffffffff816e259a>] dump_stack+0x46/0x58
[   28.026647]  [<ffffffff810661dc>] warn_slowpath_common+0x8c/0xc0
[   28.026653]  [<ffffffff81376e70>] ? sg_kfree+0x30/0x30
[   28.026658]  [<ffffffff8106622a>] warn_slowpath_null+0x1a/0x20
[   28.026680]  [<ffffffffa03e1fe9>] i915_gem_object_set_cache_level+0x389/0x3a0 [i915]
[   28.026684]  [<ffffffff8137723f>] ? sg_alloc_table+0x1f/0x50
[   28.026703]  [<ffffffffa03e2162>] i915_gem_object_pin_to_display_plane+0x62/0x1c0 [i915]
[   28.026727]  [<ffffffffa03f9b10>] intel_pin_and_fence_fb_obj+0xc0/0x140 [i915]
[   28.026732]  [<ffffffff816e82ee>] ? mutex_lock+0x1e/0x40
[   28.026761]  [<ffffffffa0424277>] intelfb_create+0x107/0x510 [i915]
[   28.026778]  [<ffffffffa020f807>] ? drm_mode_create+0x47/0x70 [drm]
[   28.026786]  [<ffffffffa01a404e>] drm_fb_helper_initial_config+0x2fe/0x550 [drm_kms_helper]
[   28.026813]  [<ffffffffa0431323>] ? i915_write32+0xc3/0x190 [i915]
[   28.026838]  [<ffffffffa0424751>] intel_fbdev_initial_config+0x21/0x30 [i915]
[   28.026859]  [<ffffffffa03cb38d>] i915_driver_load+0xe9d/0xed0 [i915]
[   28.026876]  [<ffffffffa020aad1>] drm_get_pci_dev+0x181/0x2a0 [drm]
[   28.026881]  [<ffffffff8137b12d>] ? do_raw_spin_unlock+0x5d/0xb0
[   28.026900]  [<ffffffffa03c75d6>] i915_pci_probe+0x36/0x70 [i915]
[   28.026905]  [<ffffffff81399ceb>] local_pci_probe+0x4b/0x80
[   28.026910]  [<ffffffff8139b5c1>] pci_device_probe+0x101/0x120
[   28.026915]  [<ffffffff81478a1b>] driver_probe_device+0x7b/0x240
[   28.026920]  [<ffffffff81478c8b>] __driver_attach+0xab/0xb0
[   28.026924]  [<ffffffff81478be0>] ? driver_probe_device+0x240/0x240
[   28.026928]  [<ffffffff81476b6e>] bus_for_each_dev+0x5e/0x90
[   28.026932]  [<ffffffff8147851e>] driver_attach+0x1e/0x20
[   28.026936]  [<ffffffff81477fc4>] bus_add_driver+0x104/0x2a0
[   28.026941]  [<ffffffff814793f4>] driver_register+0x64/0xf0
[   28.026946]  [<ffffffff8139a544>] __pci_register_driver+0x64/0x70
[   28.026951]  [<ffffffffa0475000>] ? 0xffffffffa0474fff
[   28.026963]  [<ffffffffa020ad0a>] drm_pci_init+0x11a/0x130 [drm]
[   28.026968]  [<ffffffffa0475000>] ? 0xffffffffa0474fff
[   28.026987]  [<ffffffffa0475066>] i915_init+0x66/0x68 [i915]
[   28.026992]  [<ffffffff8100207e>] do_one_initcall+0x4e/0x180
[   28.026997]  [<ffffffff81058413>] ? set_memory_nx+0x43/0x50
[   28.027003]  [<ffffffff810d147c>] load_module+0x209c/0x25b0
[   28.027007]  [<ffffffff810ce0a0>] ? show_initstate+0x50/0x50
[   28.027013]  [<ffffffff810d1a3c>] SyS_init_module+0xac/0xd0
[   28.027018]  [<ffffffff816f41ef>] tracesys+0xe1/0xe6
[   28.027022] ---[ end trace be830cf8c302dde8 ]---
[   28.028654] fbcon: inteldrmfb (fb0) is primary device
[   28.045517] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   28.055306] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   28.057431] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[   28.329931] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   28.336555] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   28.414397] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   28.542099] type=1400 audit(1376384490.460:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1076 comm="apparmor_parser"
[   28.542698] type=1400 audit(1376384490.460:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1076 comm="apparmor_parser"
[   28.708504] type=1400 audit(1376384490.624:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1121 comm="apparmor_parser"
[   28.708935] type=1400 audit(1376384490.628:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1121 comm="apparmor_parser"
[   28.981638] Console: switching to colour frame buffer device 170x48
[   28.986335] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   28.986339] i915 0000:00:02.0: registered panic notifier
[   28.999008] acpi device:33: registered as cooling_device9
[   28.999465] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   28.999949] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   29.002291] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   29.008789] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[   29.079073] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   29.082938] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   29.084841] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   29.768263] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   29.808092] usb 1-1.4: usb auto-suspend, wakeup 0
[   34.643620] wlan0: authenticate with 00:04:0e:e4:00:3d
[   34.648637] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[   34.650670] wlan0: authenticated
[   34.650830] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   34.650835] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   34.652440] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[   34.655966] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[   34.660070] wlan0: associated
[   34.660175] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   35.230072] audit_printk_skb: 24 callbacks suppressed
[   35.230075] type=1400 audit(1376384497.152:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1122 comm="apparmor_parser"
[   35.231006] type=1400 audit(1376384497.152:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1122 comm="apparmor_parser"
[   35.231476] type=1400 audit(1376384497.152:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1122 comm="apparmor_parser"
[   35.232760] type=1400 audit(1376384497.156:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1122 comm="apparmor_parser"
[   35.233774] type=1400 audit(1376384497.156:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=1122 comm="apparmor_parser"
[   35.234282] type=1400 audit(1376384497.156:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=1122 comm="apparmor_parser"
[   35.235609] type=1400 audit(1376384497.156:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1122 comm="apparmor_parser"
[   35.236377] type=1400 audit(1376384497.160:27): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=1122 comm="apparmor_parser"
[   35.360113] init: alsa-restore main process (1226) terminated with status 99
[   35.400070] usb 1-1.2: link qh8-0e01/ffff8800d5546f40 start 3 [1/2 us]
[   35.407967] usb 1-1.2: unlink qh8-0e01/ffff8800d5546f40 start 3 [1/2 us]
[   35.506098] ehci-pci 0000:00:1a.0: reused qh ffff8800d5546f40 schedule
[   35.506105] usb 1-1.2: link qh8-0e01/ffff8800d5546f40 start 3 [1/2 us]
[   35.835043] init: plymouth-stop pre-start process (1502) terminated with status 1
[   36.916740] usb usb3: usb auto-resume
[   36.916760] hub 3-0:1.0: hub_resume
[   36.916822] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   36.916842] hub 3-0:1.0: hub_suspend
[   36.916857] usb usb3: bus auto-suspend, wakeup 1
[   36.917380] usb 1-1.4: usb auto-resume
[   36.962999] usb 1-1.4: finish resume
[   36.970775] usb usb3: usb auto-resume
[   36.970833] hub 3-0:1.0: hub_resume
[   36.970884] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   36.970913] hub 3-0:1.0: hub_suspend
[   36.970932] usb usb3: bus auto-suspend, wakeup 1
[   36.971008] usb usb3: usb auto-resume
[   36.982833] hub 3-0:1.0: hub_resume
[   36.982874] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   36.982884] hub 3-0:1.0: hub_suspend
[   36.982901] usb usb3: bus auto-suspend, wakeup 1
[   36.984082] usb usb3: usb auto-resume
[   36.994800] hub 3-0:1.0: hub_resume
[   36.994853] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   36.994884] hub 3-0:1.0: hub_suspend
[   36.994902] usb usb3: bus auto-suspend, wakeup 1
[   36.994987] usb usb3: usb auto-resume
[   37.007462] hub 3-0:1.0: hub_resume
[   37.007521] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   37.007543] hub 3-0:1.0: hub_suspend
[   37.007561] usb usb3: bus auto-suspend, wakeup 1
[   37.027294] usb usb3: usb auto-resume
[   37.027318] hub 3-0:1.0: hub_resume
[   37.028021] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   37.028165] hub 3-0:1.0: hub_suspend
[   37.028185] usb usb3: bus auto-suspend, wakeup 1
[   37.066835] usb usb3: usb auto-resume
[   37.066862] hub 3-0:1.0: hub_resume
[   37.066918] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   37.067344] hub 3-0:1.0: hub_suspend
[   37.067363] usb usb3: bus auto-suspend, wakeup 1
[   37.067449] usb usb3: usb auto-resume
[   37.079072] hub 3-0:1.0: hub_resume
[   37.079123] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   37.079141] hub 3-0:1.0: hub_suspend
[   37.079159] usb usb3: bus auto-suspend, wakeup 1
[   37.083702] usb usb3: usb auto-resume
[   37.094744] hub 3-0:1.0: hub_resume
[   37.098861] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   37.098879] hub 3-0:1.0: hub_suspend
[   37.098963] usb usb3: bus auto-suspend, wakeup 1
[   37.104384] usb usb3: usb auto-resume
[   37.114817] hub 3-0:1.0: hub_resume
[   37.114853] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   37.114873] hub 3-0:1.0: hub_suspend
[   37.114888] usb usb3: bus auto-suspend, wakeup 1
[   37.114950] usb usb3: usb auto-resume
[   37.126703] hub 3-0:1.0: hub_resume
[   37.126737] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   37.126748] hub 3-0:1.0: hub_suspend
[   37.126765] usb usb3: bus auto-suspend, wakeup 1
[   37.127728] usb usb3: usb auto-resume
[   37.138708] hub 3-0:1.0: hub_resume
[   37.138776] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   37.138793] hub 3-0:1.0: hub_suspend
[   37.138806] usb usb3: bus auto-suspend, wakeup 1
[   37.138832] usb usb3: usb auto-resume
[   37.150714] hub 3-0:1.0: hub_resume
[   37.150793] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   37.150811] hub 3-0:1.0: hub_suspend
[   37.150825] usb usb3: bus auto-suspend, wakeup 1
[   37.153310] usb usb3: usb auto-resume
[   37.162840] hub 3-0:1.0: hub_resume
[   37.162910] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   37.162933] hub 3-0:1.0: hub_suspend
[   37.162958] usb usb3: bus auto-suspend, wakeup 1
[   37.163025] usb usb3: usb auto-resume
[   37.174671] hub 3-0:1.0: hub_resume
[   37.174710] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   37.174737] hub 3-0:1.0: hub_suspend
[   37.174751] usb usb3: bus auto-suspend, wakeup 1
[   37.176167] usb usb3: usb auto-resume
[   37.186666] hub 3-0:1.0: hub_resume
[   37.186705] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   37.186732] hub 3-0:1.0: hub_suspend
[   37.186752] usb usb3: bus auto-suspend, wakeup 1
[   37.186812] usb usb3: usb auto-resume
[   37.198676] hub 3-0:1.0: hub_resume
[   37.198823] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   37.198884] hub 3-0:1.0: hub_suspend
[   37.198949] usb usb3: bus auto-suspend, wakeup 1
[   38.205968] usb usb3: usb auto-resume
[   38.205989] hub 3-0:1.0: hub_resume
[   38.206085] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.206114] hub 3-0:1.0: hub_suspend
[   38.206175] usb usb3: bus auto-suspend, wakeup 1
[   38.208175] usb usb3: usb auto-resume
[   38.217980] hub 3-0:1.0: hub_resume
[   38.218043] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.218070] hub 3-0:1.0: hub_suspend
[   38.218118] usb usb3: bus auto-suspend, wakeup 1
[   38.218220] usb usb3: usb auto-resume
[   38.229975] hub 3-0:1.0: hub_resume
[   38.230048] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.230072] hub 3-0:1.0: hub_suspend
[   38.230091] usb usb3: bus auto-suspend, wakeup 1
[   38.231594] usb usb3: usb auto-resume
[   38.241988] hub 3-0:1.0: hub_resume
[   38.242096] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.242120] hub 3-0:1.0: hub_suspend
[   38.242139] usb usb3: bus auto-suspend, wakeup 1
[   38.242235] usb usb3: usb auto-resume
[   38.253961] hub 3-0:1.0: hub_resume
[   38.254048] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.254072] hub 3-0:1.0: hub_suspend
[   38.254092] usb usb3: bus auto-suspend, wakeup 1
[   38.268108] usb usb3: usb auto-resume
[   38.268129] hub 3-0:1.0: hub_resume
[   38.268214] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.268256] hub 3-0:1.0: hub_suspend
[   38.268291] usb usb3: bus auto-suspend, wakeup 1
[   38.269331] usb usb3: usb auto-resume
[   38.277946] hub 3-0:1.0: hub_resume
[   38.277988] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.278024] hub 3-0:1.0: hub_suspend
[   38.278089] usb usb3: bus auto-suspend, wakeup 1
[   38.278178] usb usb3: usb auto-resume
[   38.289928] hub 3-0:1.0: hub_resume
[   38.290010] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.290032] hub 3-0:1.0: hub_suspend
[   38.290051] usb usb3: bus auto-suspend, wakeup 1
[   38.291544] usb usb3: usb auto-resume
[   38.301920] hub 3-0:1.0: hub_resume
[   38.302013] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.302047] hub 3-0:1.0: hub_suspend
[   38.302064] usb usb3: bus auto-suspend, wakeup 1
[   38.302105] usb usb3: usb auto-resume
[   38.313924] hub 3-0:1.0: hub_resume
[   38.314022] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.314048] hub 3-0:1.0: hub_suspend
[   38.314070] usb usb3: bus auto-suspend, wakeup 1
[   38.315793] usb usb3: usb auto-resume
[   38.325893] hub 3-0:1.0: hub_resume
[   38.325994] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.326020] hub 3-0:1.0: hub_suspend
[   38.326041] usb usb3: bus auto-suspend, wakeup 1
[   38.326085] usb usb3: usb auto-resume
[   38.337895] hub 3-0:1.0: hub_resume
[   38.338024] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.338050] hub 3-0:1.0: hub_suspend
[   38.338071] usb usb3: bus auto-suspend, wakeup 1
[   38.343362] usb usb3: usb auto-resume
[   38.353881] hub 3-0:1.0: hub_resume
[   38.353972] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.353998] hub 3-0:1.0: hub_suspend
[   38.354020] usb usb3: bus auto-suspend, wakeup 1
[   38.354056] usb usb3: usb auto-resume
[   38.365892] hub 3-0:1.0: hub_resume
[   38.365988] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.366017] hub 3-0:1.0: hub_suspend
[   38.366040] usb usb3: bus auto-suspend, wakeup 1
[   38.372012] usb usb3: usb auto-resume
[   38.381952] hub 3-0:1.0: hub_resume
[   38.382045] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.382072] hub 3-0:1.0: hub_suspend
[   38.382094] usb usb3: bus auto-suspend, wakeup 1
[   38.382168] usb usb3: usb auto-resume
[   38.393842] hub 3-0:1.0: hub_resume
[   38.393957] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.393984] hub 3-0:1.0: hub_suspend
[   38.394004] usb usb3: bus auto-suspend, wakeup 1
[   38.395397] usb usb3: usb auto-resume
[   38.405850] hub 3-0:1.0: hub_resume
[   38.405951] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.405980] hub 3-0:1.0: hub_suspend
[   38.406003] usb usb3: bus auto-suspend, wakeup 1
[   38.406036] usb usb3: usb auto-resume
[   38.417837] hub 3-0:1.0: hub_resume
[   38.417940] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.417969] hub 3-0:1.0: hub_suspend
[   38.417992] usb usb3: bus auto-suspend, wakeup 1
[   38.425077] usb usb3: usb auto-resume
[   38.433863] hub 3-0:1.0: hub_resume
[   38.433973] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.434003] hub 3-0:1.0: hub_suspend
[   38.434026] usb usb3: bus auto-suspend, wakeup 1
[   38.434069] usb usb3: usb auto-resume
[   38.445876] hub 3-0:1.0: hub_resume
[   38.445981] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.446011] hub 3-0:1.0: hub_suspend
[   38.446034] usb usb3: bus auto-suspend, wakeup 1
[   38.447841] usb usb3: usb auto-resume
[   38.457857] hub 3-0:1.0: hub_resume
[   38.457951] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.457984] hub 3-0:1.0: hub_suspend
[   38.458025] usb usb3: bus auto-suspend, wakeup 1
[   38.458142] usb usb3: usb auto-resume
[   38.469880] hub 3-0:1.0: hub_resume
[   38.470063] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.470092] hub 3-0:1.0: hub_suspend
[   38.470115] usb usb3: bus auto-suspend, wakeup 1
[   38.471765] usb usb3: usb auto-resume
[   38.481895] hub 3-0:1.0: hub_resume
[   38.482009] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.482044] hub 3-0:1.0: hub_suspend
[   38.482063] usb usb3: bus auto-suspend, wakeup 1
[   38.482091] usb usb3: usb auto-resume
[   38.493849] hub 3-0:1.0: hub_resume
[   38.493949] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.493975] hub 3-0:1.0: hub_suspend
[   38.493995] usb usb3: bus auto-suspend, wakeup 1
[   38.495700] usb usb3: usb auto-resume
[   38.505881] hub 3-0:1.0: hub_resume
[   38.505981] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.506007] hub 3-0:1.0: hub_suspend
[   38.506027] usb usb3: bus auto-suspend, wakeup 1
[   38.506051] usb usb3: usb auto-resume
[   38.517808] hub 3-0:1.0: hub_resume
[   38.517901] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.517927] hub 3-0:1.0: hub_suspend
[   38.517948] usb usb3: bus auto-suspend, wakeup 1
[   38.519648] usb usb3: usb auto-resume
[   38.529815] hub 3-0:1.0: hub_resume
[   38.529922] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.529949] hub 3-0:1.0: hub_suspend
[   38.529970] usb usb3: bus auto-suspend, wakeup 1
[   38.530000] usb usb3: usb auto-resume
[   38.541805] hub 3-0:1.0: hub_resume
[   38.541911] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.541939] hub 3-0:1.0: hub_suspend
[   38.541960] usb usb3: bus auto-suspend, wakeup 1
[   38.544416] usb usb3: usb auto-resume
[   38.553845] hub 3-0:1.0: hub_resume
[   38.553941] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.553967] hub 3-0:1.0: hub_suspend
[   38.553987] usb usb3: bus auto-suspend, wakeup 1
[   38.554013] usb usb3: usb auto-resume
[   38.565795] hub 3-0:1.0: hub_resume
[   38.565893] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.565919] hub 3-0:1.0: hub_suspend
[   38.565939] usb usb3: bus auto-suspend, wakeup 1
[   38.569536] usb usb3: usb auto-resume
[   38.577768] hub 3-0:1.0: hub_resume
[   38.577869] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.577893] hub 3-0:1.0: hub_suspend
[   38.577912] usb usb3: bus auto-suspend, wakeup 1
[   38.577940] usb usb3: usb auto-resume
[   38.589713] hub 3-0:1.0: hub_resume
[   38.589829] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.589863] hub 3-0:1.0: hub_suspend
[   38.589883] usb usb3: bus auto-suspend, wakeup 1
[   38.591650] usb usb3: usb auto-resume
[   38.601699] hub 3-0:1.0: hub_resume
[   38.601771] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.601837] hub 3-0:1.0: hub_suspend
[   38.601927] usb usb3: bus auto-suspend, wakeup 1
[   38.602033] usb usb3: usb auto-resume
[   38.613744] hub 3-0:1.0: hub_resume
[   38.613849] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.613877] hub 3-0:1.0: hub_suspend
[   38.613899] usb usb3: bus auto-suspend, wakeup 1
[   38.615885] usb usb3: usb auto-resume
[   38.625774] hub 3-0:1.0: hub_resume
[   38.625896] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.625924] hub 3-0:1.0: hub_suspend
[   38.625944] usb usb3: bus auto-suspend, wakeup 1
[   38.625973] usb usb3: usb auto-resume
[   38.637743] hub 3-0:1.0: hub_resume
[   38.637850] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.637878] hub 3-0:1.0: hub_suspend
[   38.637900] usb usb3: bus auto-suspend, wakeup 1
[   38.639860] usb usb3: usb auto-resume
[   38.649785] hub 3-0:1.0: hub_resume
[   38.649885] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.649914] hub 3-0:1.0: hub_suspend
[   38.649935] usb usb3: bus auto-suspend, wakeup 1
[   38.649963] usb usb3: usb auto-resume
[   38.661714] hub 3-0:1.0: hub_resume
[   38.661819] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.661846] hub 3-0:1.0: hub_suspend
[   38.661869] usb usb3: bus auto-suspend, wakeup 1
[   38.664391] usb usb3: usb auto-resume
[   38.673760] hub 3-0:1.0: hub_resume
[   38.673866] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.673901] hub 3-0:1.0: hub_suspend
[   38.673920] usb usb3: bus auto-suspend, wakeup 1
[   38.673951] usb usb3: usb auto-resume
[   38.685713] hub 3-0:1.0: hub_resume
[   38.685811] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   38.685837] hub 3-0:1.0: hub_suspend
[   38.685857] usb usb3: bus auto-suspend, wakeup 1
[   39.688073] usb usb3: usb auto-resume
[   39.688099] hub 3-0:1.0: hub_resume
[   39.688352] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   39.688397] hub 3-0:1.0: hub_suspend
[   39.688412] usb usb3: bus auto-suspend, wakeup 1
[   39.688440] usb usb3: usb auto-resume
[   39.696939] hub 3-0:1.0: hub_resume
[   39.697120] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   39.697148] hub 3-0:1.0: hub_suspend
[   39.697177] usb usb3: bus auto-suspend, wakeup 1
[   40.001557] usb usb3: usb auto-resume
[   40.001585] hub 3-0:1.0: hub_resume
[   40.001639] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   40.001660] hub 3-0:1.0: hub_suspend
[   40.001683] usb usb3: bus auto-suspend, wakeup 1
[   40.001759] usb usb3: usb auto-resume
[   40.012684] hub 3-0:1.0: hub_resume
[   40.012740] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   40.012755] hub 3-0:1.0: hub_suspend
[   40.012776] usb usb3: bus auto-suspend, wakeup 1
[   40.017416] usb usb3: usb auto-resume
[   40.028669] hub 3-0:1.0: hub_resume
[   40.028713] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   40.028739] hub 3-0:1.0: hub_suspend
[   40.028757] usb usb3: bus auto-suspend, wakeup 1
[   40.028826] usb usb3: usb auto-resume
[   40.040654] hub 3-0:1.0: hub_resume
[   40.040696] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   40.040713] hub 3-0:1.0: hub_suspend
[   40.040731] usb usb3: bus auto-suspend, wakeup 1
[   40.042048] usb usb3: usb auto-resume
[   40.052697] hub 3-0:1.0: hub_resume
[   40.052794] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   40.052867] hub 3-0:1.0: hub_suspend
[   40.052908] usb usb3: bus auto-suspend, wakeup 1
[   40.053030] usb usb3: usb auto-resume
[   40.064642] hub 3-0:1.0: hub_resume
[   40.064706] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   40.064727] hub 3-0:1.0: hub_suspend
[   40.064776] usb usb3: bus auto-suspend, wakeup 1
[   40.066867] usb usb3: usb auto-resume
[   40.076637] hub 3-0:1.0: hub_resume
[   40.076725] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   40.076755] hub 3-0:1.0: hub_suspend
[   40.076769] usb usb3: bus auto-suspend, wakeup 1
[   40.076797] usb usb3: usb auto-resume
[   40.088692] hub 3-0:1.0: hub_resume
[   40.088758] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   40.088774] hub 3-0:1.0: hub_suspend
[   40.088787] usb usb3: bus auto-suspend, wakeup 1
[   40.091825] usb usb3: usb auto-resume
[   40.100619] hub 3-0:1.0: hub_resume
[   40.100706] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   40.100726] hub 3-0:1.0: hub_suspend
[   40.100741] usb usb3: bus auto-suspend, wakeup 1
[   40.100765] usb usb3: usb auto-resume
[   40.112659] hub 3-0:1.0: hub_resume
[   40.112747] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   40.112783] hub 3-0:1.0: hub_suspend
[   40.112813] usb usb3: bus auto-suspend, wakeup 1
[   40.116416] usb usb3: usb auto-resume
[   40.124602] hub 3-0:1.0: hub_resume
[   40.124668] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   40.124716] hub 3-0:1.0: hub_suspend
[   40.124741] usb usb3: bus auto-suspend, wakeup 1
[   40.124853] usb usb3: usb auto-resume
[   40.136587] hub 3-0:1.0: hub_resume
[   40.136646] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   40.136669] hub 3-0:1.0: hub_suspend
[   40.136717] usb usb3: bus auto-suspend, wakeup 1
[   40.169897] usb usb3: usb auto-resume
[   40.169916] hub 3-0:1.0: hub_resume
[   40.169978] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   40.169998] hub 3-0:1.0: hub_suspend
[   40.170037] usb usb3: bus auto-suspend, wakeup 1
[   42.759036] usb 1-1.4: usb auto-suspend, wakeup 0
[   47.571791] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[   47.631862] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)

Attachment: config-3.11.0-rc5-next20130813-1-iniza-small
Description: Binary data

Attachment: Xorg.0.log
Description: Binary data