[PATCH 13/24] Staging: winbond: reg: fixed some lines over 80 characters

[Iker Pedrosa]

Fifth of the patches that fixes the lines over 80 characters in reg.c

Signed-off-by: Iker Pedrosa <ikerpedrosam@xxxxxxxxx>
---
 drivers/staging/winbond/reg.c | 33 ++++++++++++++++++++++-----------
 1 file changed, 22 insertions(+), 11 deletions(-)

diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
index acdc003..b05f9bd 100644
--- a/drivers/staging/winbond/reg.c
+++ b/drivers/staging/winbond/reg.c
@@ -1252,46 +1252,57 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 
 		/* for LNA=10 -------- */
 		/* Calibration (5c-m). RX DC offset current bias ON; & LNA=10; RXVGA=111111 */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x342FCC, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x06<<24) | 0x342FCC, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFF6DC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		usleep(2000);
 		/* Calibration (5f). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFAEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 
 		/* for LNA=01 -------- */
 		/* Calibration (5c-m). RX DC offset current bias ON; & LNA=01; RXVGA=111111 */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x341FCC, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x06<<24) | 0x341FCC, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFF6DC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		usleep(2000);
 		/* Calibration (5f). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFAEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 
 		/* for LNA=00 -------- */
 		/* Calibration (5c-l). RX DC offset current bias ON; & LNA=00; RXVGA=111111 */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x340FCC, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x06<<24) | 0x340FCC, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFF6DC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		usleep(2000);
 		/* Calibration (5f). turn off ENCAL signal */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xFAEDC0, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		/* Calibration (5g). turn on AGC servo-loop */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x01<<24) | 0xEFFFC2, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x01<<24) | 0xEFFFC2, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 
 		/* ----- Calibration (7). Switch RF chip to normal mode */
 		/* 0x00 0xF86100 ; 3E184   ; Switch RF chip to normal mode */
-		ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xF86100, 24);
+		ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+			       | BitReverse((0x00<<24) | 0xF86100, 24);
 		Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 		usleep(5000);
 		break;
-- 
1.8.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/