Re: [RFC PATCH 03/14] hwmon: lm75: expose to thermal fw via DTnodes

[Mark Rutland]

On Sat, Aug 24, 2013 at 12:15:44AM +0100, Eduardo Valentin wrote:
> This patch adds to lm75 temperature sensor the possibility
> to expose itself as thermal zone device, registered on the
> thermal framework.
> 
> The thermal zone is built only if a device tree node
> describing a thermal zone for this sensor is present
> inside the lm75 DT node. Otherwise, the driver behavior
> will be the same.

There'll need to be a binding document if you're extending the lm75
binding. See the comment at the top of [1]. However, I don't think you
need this at all, as I explain in my comments on the previous patch.

Thanks,
Mark.

[1] Documentation/devicetree/bindings/i2c/trivial-devices.txt

> 
> Cc: Jean Delvare <khali@xxxxxxxxxxxx>
> Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
> Cc: lm-sensors@xxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Signed-off-by: Eduardo Valentin <eduardo.valentin@xxxxxx>
> ---
>  drivers/hwmon/lm75.c | 31 +++++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
> index c03b490..dc55908 100644
> --- a/drivers/hwmon/lm75.c
> +++ b/drivers/hwmon/lm75.c
> @@ -27,6 +27,8 @@
>  #include <linux/hwmon-sysfs.h>
>  #include <linux/err.h>
>  #include <linux/mutex.h>
> +#include <linux/thermal.h>
> +#include <linux/of.h>
>  #include "lm75.h"
>  
>  
> @@ -70,6 +72,7 @@ static const u8 LM75_REG_TEMP[3] = {
>  /* Each client has this additional data */
>  struct lm75_data {
>  	struct device		*hwmon_dev;
> +	struct thermal_zone_device	*tz;
>  	struct mutex		update_lock;
>  	u8			orig_conf;
>  	u8			resolution;	/* In bits, between 9 and 12 */
> @@ -92,6 +95,19 @@ static struct lm75_data *lm75_update_device(struct device *dev);
>  
>  /* sysfs attributes for hwmon */
>  
> +static int lm75_read_temp(void *dev, unsigned long *temp)
> +{
> +	struct lm75_data *data = lm75_update_device(dev);
> +
> +	if (IS_ERR(data))
> +		return PTR_ERR(data);
> +
> +	*temp = ((data->temp[0] >> (16 - data->resolution)) * 1000) >>
> +			(data->resolution - 8);
> +
> +	return 0;
> +}
> +
>  static ssize_t show_temp(struct device *dev, struct device_attribute *da,
>  			 char *buf)
>  {
> @@ -271,11 +287,25 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
>  		goto exit_remove;
>  	}
>  
> +	if (of_find_property(client->dev.of_node, "monitored-zones", NULL)) {
> +		data->tz = thermal_zone_of_device_register(&client->dev,
> +							   0,
> +							   false, /* -hwmon */
> +							   &client->dev,
> +							   lm75_read_temp);
> +		if (IS_ERR(data->tz)) {
> +			status = PTR_ERR(data->tz);
> +			goto exit_hwmon;
> +		}
> +	}
> +
>  	dev_info(&client->dev, "%s: sensor '%s'\n",
>  		 dev_name(data->hwmon_dev), client->name);
>  
>  	return 0;
>  
> +exit_hwmon:
> +	hwmon_device_unregister(data->hwmon_dev);
>  exit_remove:
>  	sysfs_remove_group(&client->dev.kobj, &lm75_group);
>  	return status;
> @@ -285,6 +315,7 @@ static int lm75_remove(struct i2c_client *client)
>  {
>  	struct lm75_data *data = i2c_get_clientdata(client);
>  
> +	thermal_zone_device_unregister(data->tz);
>  	hwmon_device_unregister(data->hwmon_dev);
>  	sysfs_remove_group(&client->dev.kobj, &lm75_group);
>  	lm75_write_value(client, LM75_REG_CONF, data->orig_conf);
> -- 
> 1.8.2.1.342.gfa7285d
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/