[PATCH v3 2/6] media: s5p-tv: Restore vpll clock rate
From: Mateusz Krawczuk
Date: Wed Aug 28 2013 - 12:14:42 EST
Restore vpll clock rate if start stream fail or stream is off.
Signed-off-by: Mateusz Krawczuk <m.krawczuk@xxxxxxxxxxxxxxxxxxx>
---
drivers/media/platform/s5p-tv/sdo_drv.c | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/s5p-tv/sdo_drv.c b/drivers/media/platform/s5p-tv/sdo_drv.c
index 0afa90f..9dbdfe6 100644
--- a/drivers/media/platform/s5p-tv/sdo_drv.c
+++ b/drivers/media/platform/s5p-tv/sdo_drv.c
@@ -55,6 +55,8 @@ struct sdo_device {
struct clk *dacphy;
/** clock for control of VPLL */
struct clk *fout_vpll;
+ /** vpll rate before sdo stream was on */
+ int vpll_rate;
/** regulator for SDO IP power */
struct regulator *vdac;
/** regulator for SDO plug detection */
@@ -193,17 +195,34 @@ static int sdo_s_power(struct v4l2_subdev *sd, int on)
static int sdo_streamon(struct sdo_device *sdev)
{
+ int ret;
+
/* set proper clock for Timing Generator */
- clk_set_rate(sdev->fout_vpll, 54000000);
+ sdev->vpll_rate = clk_get_rate(sdev->fout_vpll);
+ ret = clk_set_rate(sdev->fout_vpll, 54000000);
+ if (ret < 0) {
+ dev_err(sdev->dev,
+ "Failed to set vpll rate!\n");
+ return ret;
+ }
dev_info(sdev->dev, "fout_vpll.rate = %lu\n",
clk_get_rate(sdev->fout_vpll));
/* enable clock in SDO */
sdo_write_mask(sdev, SDO_CLKCON, ~0, SDO_TVOUT_CLOCK_ON);
- clk_enable(sdev->dacphy);
+ ret = clk_enable(sdev->dacphy);
+ if (ret < 0) {
+ dev_err(sdev->dev,
+ "clk_enable(dacphy) failed !\n");
+ goto fail;
+ }
/* enable DAC */
sdo_write_mask(sdev, SDO_DAC, ~0, SDO_POWER_ON_DAC);
sdo_reg_debug(sdev);
return 0;
+fail:
+ sdo_write_mask(sdev, SDO_CLKCON, 0, SDO_TVOUT_CLOCK_ON);
+ clk_set_rate(sdev->fout_vpll, sdev->vpll_rate);
+ return ret;
}
static int sdo_streamoff(struct sdo_device *sdev)
@@ -220,6 +239,7 @@ static int sdo_streamoff(struct sdo_device *sdev)
}
if (tries == 0)
dev_err(sdev->dev, "failed to stop streaming\n");
+ clk_set_rate(sdev->fout_vpll, sdev->vpll_rate);
return tries ? 0 : -EIO;
}
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/