Re: [lm-sensors] sht15 kernel driver

[Guenter Roeck]

On Thu, Aug 29, 2013 at 11:02:16AM -0400, Jerome Oufella wrote:
> Chris Rodley <chris@xxxxxxxxxxxx> writes:
> 
> > Thanks Jerome!
> >
> > That was just what I needed to know.
> > The device is now set up and is working well - I will have a go at
> > back porting now.
> >
> > Many thanks again for your help!
> > Chris
> 
> Good to know Chris!
> 
> Note, we noticed that the sht15 driver may be sensible to noisy lines,
> we suspect a race condition around the interrupt handling code.
> 
Any proposed fixes ?

Guenter

> If your sensor is populated on the board you shouldn't have problems
> though.
> 
> Jerome
> 
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@xxxxxxxxxxxxxx
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/