[PATCH 3/4] AHCI: Conserve interrupts withpci_enable_msi_block_part() interface

From: Alexander Gordeev
Date: Mon Sep 02 2013 - 04:58:40 EST


Make use of the new pci_enable_msi_block_part() interface
and conserve on othewise wasted interrupt resources for 10
of 16 unused MSI vectors on Intel chipsets.

Signed-off-by: Alexander Gordeev <agordeev@xxxxxxxxxx>
---
drivers/ata/ahci.c | 48 +++++++++++++++++++++++++++++-------------------
1 files changed, 29 insertions(+), 19 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index db4380d..b0c1648 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1091,26 +1091,36 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host)
{}
#endif

-int ahci_init_interrupts(struct pci_dev *pdev, struct ahci_host_priv *hpriv)
+int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,
+ struct ahci_host_priv *hpriv)
{
int rc;
unsigned int maxvec;

- if (!(hpriv->flags & AHCI_HFLAG_NO_MSI)) {
- rc = pci_enable_msi_block_auto(pdev, &maxvec);
- if (rc > 0) {
- if ((rc == maxvec) || (rc == 1))
- return rc;
- /*
- * Assume that advantage of multipe MSIs is negated,
- * so fallback to single MSI mode to save resources
- */
- pci_disable_msi(pdev);
- if (!pci_enable_msi(pdev))
- return 1;
- }
- }
+ if (hpriv->flags & AHCI_HFLAG_NO_MSI)
+ goto intx;
+
+ rc = pci_enable_msi_block_part(pdev, n_ports, AHCI_MAX_PORTS);
+ if (!rc)
+ return AHCI_MAX_PORTS;
+ if (rc < 0)
+ goto intx;
+
+ maxvec = rc;
+ rc = pci_enable_msi_block_part(pdev, n_ports, maxvec);
+ if (!rc)
+ return maxvec;
+ if (rc < 0)
+ goto intx;
+
+ /*
+ * Assume that advantage of multipe MSIs is negated,
+ * so fallback to single MSI mode to save resources
+ */
+ if (!pci_enable_msi(pdev))
+ return 1;

+intx:
pci_intx(pdev, 1);
return 0;
}
@@ -1277,10 +1287,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)

hpriv->mmio = pcim_iomap_table(pdev)[ahci_pci_bar];

- n_msis = ahci_init_interrupts(pdev, hpriv);
- if (n_msis > 1)
- hpriv->flags |= AHCI_HFLAG_MULTI_MSI;
-
/* save initial config */
ahci_pci_save_initial_config(pdev, hpriv);

@@ -1327,6 +1333,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
*/
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));

+ n_msis = ahci_init_interrupts(pdev, n_ports, hpriv);
+ if (n_msis > 1)
+ hpriv->flags |= AHCI_HFLAG_MULTI_MSI;
+
host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
if (!host)
return -ENOMEM;
--
1.7.7.6


--
Regards,
Alexander Gordeev
agordeev@xxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/