On 09/11/2013 11:16 AM, Guenter Roeck wrote:No problem. I'll try to remember next time. Too late for patch 3/6, though.
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
v2: rephrase patch subject
call gpio_set_debounce before registering extcon device,
and set debounce_jiffies only if the call was not successful
drivers/extcon/extcon-gpio.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index 77d35a7..e5a4405 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -100,7 +100,13 @@ static int gpio_extcon_probe(struct platform_device *pdev)
extcon_data->state_off = pdata->state_off;
if (pdata->state_on && pdata->state_off)
extcon_data->edev.print_state = extcon_gpio_print_state;
- extcon_data->debounce_jiffies = msecs_to_jiffies(pdata->debounce);
+ if (pdata->debounce) {
+ ret = gpio_set_debounce(extcon_data->gpio,
+ pdata->debounce * 1000);
+ if (ret < 0)
+ extcon_data->debounce_jiffies =
+ msecs_to_jiffies(pdata->debounce);
+ }
ret = extcon_dev_register(&extcon_data->edev, &pdev->dev);
if (ret < 0)
I'd like you to add patch description for patch feature.
So I add a little description about using gpio_set_debounce()
I modify patch name as following to maintain patch naming style of extcon.
Before
extcon-gpio: Do not unnecessarily initialize variables
extcon-gpio: Use gpio driver/chip debounce if supported
After
extcon: gpio: Do not unnecessarily initialize variables
extcon: gpio: Use gpio driver/chip debounce if supported
Applied it on extcon-linus.Thanks,
You can check it on extcon-linus branch in a few minutes.