[PATCH 1/2] regulator: ti-abb: skip optional parameter for ldo-address

[Nishanth Menon]

On platforms like OMAP4460, LDO override is never used. Even though
efuse determines the ABB bias mode to operate at, ABB voltage is
preconfigured in internal efuse registers without the need for
LDO override for bias voltage. So skip optional parameter if
property is not present.

Signed-off-by: Nishanth Menon <nm@xxxxxx>
---
 drivers/regulator/ti-abb-regulator.c |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/regulator/ti-abb-regulator.c b/drivers/regulator/ti-abb-regulator.c
index d8e3e12..1e02805 100644
--- a/drivers/regulator/ti-abb-regulator.c
+++ b/drivers/regulator/ti-abb-regulator.c
@@ -765,6 +765,11 @@ static int ti_abb_probe(struct platform_device *pdev)
 
 	pname = "ldo-address";
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
+	if (!res) {
+		dev_dbg(dev, "Missing '%s' IO resource\n", pname);
+		ret = -ENODEV;
+		goto skip_opt;
+	}
 	abb->ldo_base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(abb->ldo_base)) {
 		ret = PTR_ERR(abb->ldo_base);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/