Re: [PATCH 1/2] gpio/omap: maintain GPIO and IRQ usage separately

[Javier Martinez Canillas]

On 09/27/2013 08:08 PM, Kevin Hilman wrote:
> Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx> writes:
> 
>> The GPIO OMAP controller pins can be used as IRQ and GPIO
>> independently so is necessary to keep track GPIO pins and
>> IRQ lines usage separately to make sure that the bank will
>> always be enabled while being used.
>>
>> Also move gpio_is_input() definition in preparation for the
>> next patch that setups the controller's irq_chip driver when
>> a caller requests an interrupt line.
>>
>> Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
> 
> I'm fine with this appproach.  For both patches:
> 
> Reviewed-by: Kevin Hilman <khilman@xxxxxxxxxx>
> 
> Also, I gave it a spin across a handful of OMAP boards using v3.12-rc2 +
> these 2 patches.
> 
> Boot tested successfully with DT boot:
> 
> omap3530/beagle
> omap3730/beagle-xm
> omap3530/overo (Tobi w/GPIO IRQ networking)
> omap3730/overo STORM (w/GPIO IRQ for networking)
> am335x/beaglebone
> am335x/beaglebone black
> omap4430/panda
> omap4460/panda-es
> omap5912/OSK (omap1)
> 
> I also verified non-DT boot on the OMAP3 platforms that still support
> legacy boot.
> 
> So feel free to also add
> 
> Tested-by: Kevin Hilman <khilman@xxxxxxxxxx>
> 
> Thanks for your persistence in getting a fix for this upstream.
> 
> Kevin
> 

Thanks a lot Kevin for testing on so many boards.

Linus,

Since this patch-set doesn't cause any regression and fix a long standing issue
on OMAP, do you think that it would be possible to include on the -rc series as
a bugfix or do you prefer to wait until 3.13?

Thanks a lot and best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/