Re: [PATCH v3 05/10] ARM: dts: omap3-beagle: Use reset-gpios forhsusb2_reset

[Benoit Cousson]

On 03/10/2013 14:05, Benoit Cousson wrote:
> Hi Roger,
>
> Yes, I will. I've been waiting for these ones for so long :-)

In fact it does not apply correctly on my for_3.13/dts branch :-(

error: arch/arm/boot/dts/omap3-beagle.dts: patch does not apply
Patch failed at 0004 ARM: dts: omap3-beagle: Make USB host pin naming 
consistent

Could you rebase it?

Thanks,
Benoit


> Thanks,
> Benoit
>
> On 03/10/2013 12:34, Roger Quadros wrote:
> > Hi Benoit,
> >
> > Could you please take the device tree related patches [5 to 10] in
> > this series?
> > Thanks.
> >
> > cheers,
> > -roger
> >
> > On 09/24/2013 11:53 AM, Roger Quadros wrote:
> > > We no longer need to model the RESET line as a regulator since
> > > the USB phy-nop driver accepts "reset-gpios" property.
> > >
> > > Signed-off-by: Roger Quadros <rogerq@xxxxxx>
> > > ---
> > >   arch/arm/boot/dts/omap3-beagle.dts |   13 +------------
> > >   1 files changed, 1 insertions(+), 12 deletions(-)
> > >
> > > diff --git a/arch/arm/boot/dts/omap3-beagle.dts
> > > b/arch/arm/boot/dts/omap3-beagle.dts
> > > index dfd8310..71bde47 100644
> > > --- a/arch/arm/boot/dts/omap3-beagle.dts
> > > +++ b/arch/arm/boot/dts/omap3-beagle.dts
> > > @@ -44,17 +44,6 @@
> > >           };
> > >       };
> > >
> > > -    /* HS USB Port 2 RESET */
> > > -    hsusb2_reset: hsusb2_reset_reg {
> > > -        compatible = "regulator-fixed";
> > > -        regulator-name = "hsusb2_reset";
> > > -        regulator-min-microvolt = <3300000>;
> > > -        regulator-max-microvolt = <3300000>;
> > > -        gpio = <&gpio5 19 0>;    /* gpio_147 */
> > > -        startup-delay-us = <70000>;
> > > -        enable-active-high;
> > > -    };
> > > -
> > >       /* HS USB Port 2 Power */
> > >       hsusb2_power: hsusb2_power_reg {
> > >           compatible = "regulator-fixed";
> > > @@ -68,7 +57,7 @@
> > >       /* HS USB Host PHY on PORT 2 */
> > >       hsusb2_phy: hsusb2_phy {
> > >           compatible = "usb-nop-xceiv";
> > > -        reset-supply = <&hsusb2_reset>;
> > > +        reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;    /* gpio_147 */
> > >           vcc-supply = <&hsusb2_power>;
> > >       };

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/