Re: [PATCH v6] clk: add MOXA ART SoCs clock driver

[Mike Turquette]

Quoting Jonas Jensen (2013-07-29 02:44:22)
> This patch adds MOXA ART SoCs clock driver support.
> 
> Signed-off-by: Jonas Jensen <jonas.jensen@xxxxxxxxx>

I've taken this patch into clk-next. Thanks for the rework.

Is it possible for parent clocks of these moxa core clocks to change
rate? It might make sense for your driver to provide a .recalc_rate
callback in a future patch.

Regards,
Mike

> ---
> 
> Notes:
>     Changes since v5:
>     
>     1. corrected of_iomap return value check
>     2. don't panic, print the error and return
>     
>     Applies to next-20130729
> 
>  .../bindings/clock/moxa,moxart-core-clock.txt      | 23 +++++++
>  drivers/clk/Makefile                               |  1 +
>  drivers/clk/clk-moxart.c                           | 71 ++++++++++++++++++++++
>  3 files changed, 95 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/moxa,moxart-core-clock.txt
>  create mode 100644 drivers/clk/clk-moxart.c
> 
> diff --git a/Documentation/devicetree/bindings/clock/moxa,moxart-core-clock.txt b/Documentation/devicetree/bindings/clock/moxa,moxart-core-clock.txt
> new file mode 100644
> index 0000000..379ae79
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/moxa,moxart-core-clock.txt
> @@ -0,0 +1,23 @@
> +Device Tree Clock bindings for arch-moxart
> +
> +This binding uses the common clock binding[1].
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +MOXA ART SoCs allow to determine core clock frequencies by reading
> +a register.
> +
> +Required properties:
> +- compatible : Must be "moxa,moxart-core-clock"
> +- #clock-cells : Should be 0
> +- reg : Should contain registers location and length
> +- clock-output-names : Should be "coreclk"
> +
> +For example:
> +
> +       coreclk: core-clock@98100000 {
> +               compatible = "moxa,moxart-core-clock";
> +               #clock-cells = <0>;
> +               reg = <0x98100000 0x34>;
> +               clock-output-names = "coreclk";
> +       };
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 4038c2b..933622f 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_COMMON_CLK)      += clk-composite.o
>  
>  # SoCs specific
>  obj-$(CONFIG_ARCH_BCM2835)     += clk-bcm2835.o
> +obj-$(CONFIG_ARCH_MOXART)      += clk-moxart.o
>  obj-$(CONFIG_ARCH_NOMADIK)     += clk-nomadik.o
>  obj-$(CONFIG_ARCH_HIGHBANK)    += clk-highbank.o
>  obj-$(CONFIG_ARCH_NSPIRE)      += clk-nspire.o
> diff --git a/drivers/clk/clk-moxart.c b/drivers/clk/clk-moxart.c
> new file mode 100644
> index 0000000..14d5b26
> --- /dev/null
> +++ b/drivers/clk/clk-moxart.c
> @@ -0,0 +1,71 @@
> +/*
> + * MOXA ART SoCs clock driver.
> + *
> + * Copyright (C) 2013 Jonas Jensen
> + *
> + * Jonas Jensen <jonas.jensen@xxxxxxxxx>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2.  This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/io.h>
> +#include <linux/of_address.h>
> +#include <linux/clkdev.h>
> +
> +void __init moxart_of_clk_init(struct device_node *node)
> +{
> +       static void __iomem *base;
> +       struct clk *clk;
> +       unsigned long rate;
> +       unsigned int mul, val, div;
> +       const char *name;
> +
> +       base = of_iomap(node, 0);
> +       if (!base) {
> +               pr_err("%s: of_iomap failed\n", node->full_name);
> +               return;
> +       }
> +
> +       mul = (readl(base + 0x30) >> 3) & 0x1ff;
> +       val = (readl(base + 0x0c) >> 4) & 0x7;
> +
> +       switch (val) {
> +       case 1:
> +               div = 3;
> +               break;
> +       case 2:
> +               div = 4;
> +               break;
> +       case 3:
> +               div = 6;
> +               break;
> +       case 4:
> +               div = 8;
> +               break;
> +       default:
> +               div = 2;
> +               break;
> +       }
> +
> +       /*
> +        * the rate calculation below is only tested and proven
> +        * to be true for UC-7112-LX
> +        *
> +        * UC-7112-LX: mul=80 val=0
> +        *
> +        * to support other moxart SoC hardware, this may need
> +        * a change, though it's possible it works there too
> +        */
> +       rate = (mul * 1200000 / div);
> +
> +       of_property_read_string(node, "clock-output-names", &name);
> +       clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
> +       clk_register_clkdev(clk, NULL, name);
> +       of_clk_add_provider(node, of_clk_src_simple_get, clk);
> +
> +       iounmap(base);
> +}
> +CLK_OF_DECLARE(moxart_core_clock, "moxa,moxart-core-clock", moxart_of_clk_init);
> -- 
> 1.8.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/