Re: [PATCH] thermal: offer TI thermal support only when ARCH_OMAP2PLUSis defined

From: Bartlomiej Zolnierkiewicz
Date: Mon Oct 07 2013 - 06:51:19 EST

On Monday, October 07, 2013 11:57:16 AM Bartlomiej Zolnierkiewicz wrote:
>
> Hi,
>
> On Friday, October 04, 2013 02:22:30 PM Eduardo Valentin wrote:
> > On 04-10-2013 08:35, Bartlomiej Zolnierkiewicz wrote:
> > > Menu for Texas Instruments thermal support is visible on all
> > > platforms and TI_SOC_THERMAL + TI_THERMAL config options can
> > > be selected also on EXYNOS platform (on which ARCH_HAS_BANDGAP
> > > config option is selected by SoCs config options to fulfill
> > > EXYNOS_THERMAL config option dependency). Thus the code which
> > > is never used can be build. Fix it by making TI menu dependent
> > > on ARCH_OMAP2PLUS config option.
> > >
> > > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
> > > Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> > > ---
> > > drivers/thermal/Kconfig | 1 +
> > > 1 file changed, 1 insertion(+)
> > >
> > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> > > index 57e06a9..a709c63 100644
> > > --- a/drivers/thermal/Kconfig
> > > +++ b/drivers/thermal/Kconfig
> > > @@ -193,6 +193,7 @@ config X86_PKG_TEMP_THERMAL
> > > notification methods.
> > >
> > > menu "Texas Instruments thermal drivers"
> > > +depends on ARCH_OMAP2PLUS
> >
> > No, this driver is not for ARCH_OMAP*, but for TI bandgap, with the
> > option to offer thermal control. So, the HW supported is TI bandgap IP,
> > not ARCH_OMAP*. It happens to be so that OMAP2PLUS all have a
> > (different) version of this device.
> >
> > However, DRA7 devices, for instance, also feature the bandgap IP
> > (different version of those present in OMAP devices), and it is not
> > ARCH_OMAP2PLUS.
>
> Then you have wrong dependencies anyway since ARCH_BANDGAP is selected

s/ARCH_BANDGAP/ARCH_HAS_BANDGAP/

> currently only by ARCH_OMAP2PLUS and EXYNOS SoCs.
>
> arch/arm/mach-omap2/Kconfig (next-20130927):
>
> config ARCH_OMAP2PLUS
> bool
> select ARCH_HAS_BANDGAP
> select ARCH_HAS_CPUFREQ
> select ARCH_HAS_HOLES_MEMORYMODEL
> select ARCH_OMAP
> select ARCH_REQUIRE_GPIOLIB
> select CLKDEV_LOOKUP
> select CLKSRC_MMIO
> select GENERIC_CLOCKEVENTS
> select GENERIC_IRQ_CHIP
> select HAVE_CLK
> select OMAP_DM_TIMER
> select PINCTRL
> select PROC_DEVICETREE if PROC_FS
> select SOC_BUS
> select SPARSE_IRQ
> select TI_PRIV_EDMA
> select USE_OF
> help
> Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
>
> drivers/thermal/ti-soc-thermal/Kconfig (next-20130927):
>
> config TI_SOC_THERMAL
> tristate "Texas Instruments SoCs temperature sensor driver"
> depends on THERMAL
> depends on ARCH_HAS_BANDGAP
> help
> If you say yes here you get support for the Texas Instruments
> OMAP4460+ on die bandgap temperature sensor support. The register
> set is part of system control module.
>
> This includes alert interrupts generation and also the TSHUT
> support.

and for EXYNOS it looks like that (next-20130927):

arch/arm/mach-exynos/Kconfig:

config CPU_EXYNOS4210
bool "SAMSUNG EXYNOS4210"
default y
depends on ARCH_EXYNOS4
select ARCH_HAS_BANDGAP
select ARM_CPU_SUSPEND if PM
select PINCTRL_EXYNOS
select PM_GENERIC_DOMAINS if PM
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
help
Enable EXYNOS4210 CPU support

config SOC_EXYNOS4212
bool "SAMSUNG EXYNOS4212"
default y
depends on ARCH_EXYNOS4
select ARCH_HAS_BANDGAP
select PINCTRL_EXYNOS
select PM_GENERIC_DOMAINS if PM
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
help
Enable EXYNOS4212 SoC support

config SOC_EXYNOS4412
bool "SAMSUNG EXYNOS4412"
default y
depends on ARCH_EXYNOS4
select ARCH_HAS_BANDGAP
select PINCTRL_EXYNOS
select PM_GENERIC_DOMAINS if PM
select SAMSUNG_DMADEV
help
Enable EXYNOS4412 SoC support

config SOC_EXYNOS5250
bool "SAMSUNG EXYNOS5250"
default y
depends on ARCH_EXYNOS5
select ARCH_HAS_BANDGAP
select PINCTRL_EXYNOS
select PM_GENERIC_DOMAINS if PM
select S5P_PM if PM
select S5P_SLEEP if PM
select S5P_DEV_MFC
select SAMSUNG_DMADEV
help
Enable EXYNOS5250 SoC support

config SOC_EXYNOS5420
bool "SAMSUNG EXYNOS5420"
default y
depends on ARCH_EXYNOS5
select PM_GENERIC_DOMAINS if PM
select S5P_PM if PM
select S5P_SLEEP if PM
help
Enable EXYNOS5420 SoC support

config SOC_EXYNOS5440
bool "SAMSUNG EXYNOS5440"
default y
depends on ARCH_EXYNOS5
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_HAS_BANDGAP
select ARCH_HAS_OPP
select HAVE_ARM_ARCH_TIMER
select AUTO_ZRELADDR
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
select PINCTRL_EXYNOS5440
select PM_OPP
help
Enable EXYNOS5440 SoC support

drivers/thermal/Kconfig:

menu "Samsung thermal drivers"
depends on PLAT_SAMSUNG
source "drivers/thermal/samsung/Kconfig"
endmenu

drivers/thermal/samsung/Kconfig

config EXYNOS_THERMAL
tristate "Exynos thermal management unit driver"
depends on ARCH_HAS_BANDGAP && OF
help
If you say yes here you get support for the TMU (Thermal Management
Unit) driver for SAMSUNG EXYNOS series of SoCs. This driver initialises
the TMU, reports temperature and handles cooling action if defined.
This driver uses the Exynos core thermal APIs and TMU configuration
data from the supported SoCs.


> > And because of that, the design of this driver is different. It is not
> > expected to depend on an arch, but the arch code is expected to select
> > ARCH_HAS_BANDGAP.
>
> There should be additional dependencies beside ARCH_BANDGAP, i.e. on

s/ARCH_BANDGAP/ARCH_HAS_BANDGAP/

> EXYNOS platforms we currently also have dependency on PLAT_SAMSUNG
> (should be ARCH_EXYNOS instead, my other patch fixes it).
>
> > > source "drivers/thermal/ti-soc-thermal/Kconfig"
> > > endmenu
>
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/