RE: [PATCH v5 2/4] dmaengine: add driver for Samsung s3c24xx SoCs

[Kukjin Kim]

Vinod Koul wrote:
> 
> On Wed, Sep 18, 2013 at 09:19:54PM +0200, Heiko Stübner wrote:
> > This adds a new driver to support the s3c24xx dma using the dmaengine
> > and makes the old one in mach-s3c24xx obsolete in the long run.
> >
> > Conceptually the s3c24xx-dma feels like a distant relative of the pl08x
> > with numerous virtual channels being mapped to a lot less physical ones.
> > The driver therefore borrows a lot from the amba-pl08x driver in this
> > regard. Functionality-wise the driver gains a memcpy ability in addition
> > to the slave_sg one.
> >
> > The driver supports both the method for requesting the peripheral used
> > by SoCs before the S3C2443 and the different method for S3C2443 and
> later.
> >
> > On earlier SoCs the hardware channels usable for specific peripherals is
> > constrainted while on later SoCs all channels can be used for any
> peripheral.
> >
> > Tested on a s3c2416-based board, memcpy using the dmatest module and
> > slave_sg partially using the spi-s3c64xx driver.
> >
> > Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
> > Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> Acked-by: Vinod Koul <vinod.koul@xxxxxxxxx>
> 
Vinod, thanks for your ack :-)

Applied this whole series.
Kukjin

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/