Re: [xen] double fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
From: Linus Torvalds
Date: Mon Oct 07 2013 - 23:07:49 EST
I'll catch up with your emails if it kills me..
On Mon, Oct 7, 2013 at 7:36 PM, Fengguang Wu <fengguang.wu@xxxxxxxxx> wrote:
> On Tue, Oct 08, 2013 at 10:14:52AM +0800, Fengguang Wu wrote:
>
> Disabled PARPORT_PC:
>
> # CONFIG_PARPORT is not set
>
> and retest shows another call trace. Here are two run logs:
Ugh. Ok. So something else is wrong too.
> [ 4.074903] registered taskstats version 1
> [ 4.077382] rtc-test rtc-test.0: setting system clock to 2013-09-09 06:44:08 UTC (1378709048)
> [ 4.081688] debug: unmapping init [mem 0xffffffff81df2000-0xffffffff81ec3fff]
> /bin/sh: /proc/self/fd/9: No such file or directory
> [ 4.148224] BUG: unable to handle kernel NULL pointer dereference at (null)
> [ 4.150690] IP: [< (null)>] (null)
> [ 4.152050] PGD 6a79067 PUD 69d3067 PMD 0
> [ 4.152125] Oops: 0010 [#1] PREEMPT SMP DEBUG_PAGEALLOC
> [ 4.152125] CPU: 0 PID: 130 Comm: sh Not tainted 3.11.0-rc2-00010-gc817a67-dirty #7
> [ 4.152125] task: ffff880006a5e980 ti: ffff880006a3e000 task.ti: ffff880006a3e000
> [ 4.152125] RIP: 0010:[<0000000000000000>] [< (null)>] (null)
> [ 4.152125] RSP: 0018:ffff88000dc03e40 EFLAGS: 00010286
> [ 4.152125] RAX: 0000000000000001 RBX: 0000000000000102 RCX: 0000000000000000
> [ 4.152125] RDX: 0000000000000f13 RSI: 0000000000000000 RDI: 0000000000000000
> [ 4.152125] RBP: ffff88000dc03e98 R08: 000000000000160f R09: ffff88000dc0a000
> [ 4.152125] R10: ffff88000dc0a000 R11: ffff880006a5e980 R12: ffff880006a3ffd8
> [ 4.152125] R13: 0000000000000000 R14: 0000000000000000 R15: ffffffff81f347d8
> [ 4.152125] FS: 00007fe94d7b4700(0000) GS:ffff88000dc00000(0000) knlGS:0000000000000000
> [ 4.152125] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 4.152125] CR2: 0000000000000000 CR3: 0000000006a49000 CR4: 00000000000006b0
> [ 4.152125] Stack:
> [ 4.152125] ffffffff810989e6 ffffffff8109897b ffffffff810c73b8 ffff88000dc03e58
> [ 4.152125] ffffffff821cbe60 0000000000000000 0000000000000000 ffffffff81f33780
> [ 4.152125] ffff88000dc03ec8 ffffffff81f34fd8 ffffffff81f34bd8 ffff88000dc03f08
> [ 4.152125] Call Trace:
> [ 4.152125] <IRQ>
> [ 4.152125] [<ffffffff810989e6>] ? call_timer_fn+0x6b/0xde
> [ 4.152125] [<ffffffff8109897b>] ? detach_timer+0x46/0x46
> [ 4.152125] [<ffffffff810c73b8>] ? trace_hardirqs_on_caller+0x13a/0x18b
> [ 4.152125] [<ffffffff81098fcb>] run_timer_softirq+0x187/0x1cf
> [ 4.152125] [<ffffffff8109555f>] __do_softirq+0xc6/0x18f
> [ 4.152125] [<ffffffff811264a7>] ? unlazy_walk+0x125/0x172
> [ 4.152125] [<ffffffff81095745>] irq_exit+0x58/0x9e
> [ 4.152125] [<ffffffff81044e69>] smp_apic_timer_interrupt+0x31/0x3e
> [ 4.152125] [<ffffffff818547b2>] apic_timer_interrupt+0x72/0x80
> [ 4.152125] <EOI>
> [ 4.152125] [<ffffffff810c563d>] ? arch_local_irq_restore+0x6/0xd
> [ 4.152125] [<ffffffff810c9235>] lock_release+0x16e/0x17a
> [ 4.152125] [<ffffffff81852754>] _raw_spin_unlock+0x1b/0x4f
> [ 4.152125] [<ffffffff811264a7>] unlazy_walk+0x125/0x172
> [ 4.152125] [<ffffffff81128578>] do_last+0x6cc/0x9b5
> [ 4.152125] [<ffffffff81126108>] ? inode_permission+0x3d/0x3f
> [ 4.152125] [<ffffffff81128a8b>] path_openat+0x22a/0x48d
> [ 4.152125] [<ffffffff81128d23>] do_filp_open+0x35/0x85
> [ 4.152125] [<ffffffff811337e9>] ? __alloc_fd+0xd8/0xea
> [ 4.152125] [<ffffffff8111d932>] do_sys_open+0x6b/0xfd
> [ 4.152125] [<ffffffff810c73d2>] ? trace_hardirqs_on_caller+0x154/0x18b
> [ 4.152125] [<ffffffff8111d9dd>] SyS_open+0x19/0x1b
> [ 4.152125] [<ffffffff81853b29>] system_call_fastpath+0x16/0x1b
> [ 4.152125] Code: Bad RIP value.
And this one doesn't leave any hint of where it came from. Damn. The
register contents aren't being very helpful either.
The second one is the same thing.. And equally unhelpful as far as I can tell.
I think we need more powerful debugging aids to make these useful.
Linus
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/