pull request: bluetooth-next 2013-10-14

From: Gustavo Padovan
Date: Mon Oct 14 2013 - 19:52:30 EST

Next message: Soren Brinkmann: "[PATCH RFC 0/5] Ethernet support for Zynq"
Previous message: Bjorn Helgaas: "Re: [3.11.4] Thunderbolt/PCI unplug oops in pci_pme_list_scan"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi John,

More patches for 3.12, busy times for Bluetooth. More than a 100 commits since
the last pull. The bulk of work comes from Johan and Marcel, they are doing
fixes and improvements all over the Bluetooth subsystem, as the diffstat can
show.

Please pull or let me know of any problems! Thanks.

Gustavo
--
The following changes since commit 4f3e219d95a3c31b916dcd5e2631c4e440736f79:

Bluetooth: Only one command per L2CAP LE signalling is supported (2013-10-03 16:09:59 +0300)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next for-upstream

for you to fetch changes up to 4b836f393bd8ed111857a6ee1865e44627266ec6:

Bluetooth: Read current IAC LAP on controller setup (2013-10-14 19:31:18 -0300)

----------------------------------------------------------------
Andre Guedes (4):
Bluetooth: Rename hci_conn variable in hci_connect_le()
Bluetooth: Initialize hci_conn fields in hci_connect_le
Bluetooth: Use HCI request for LE connection
Bluetooth: Refactor hci_connect_le

Johan Hedberg (17):
Bluetooth: Rename HCI_LE_PERIPHERAL to HCI_ADVERTISING
Bluetooth: Add public mgmt function to send New Settings event
Bluetooth: Fix re-enabling advertising after a connection
Bluetooth: Fix changing advertising setting while LE is connected
Bluetooth: Fix potential double-frees of L2CAP skbs
Bluetooth: Fix checking for HCI_SETUP flag when receiving mgmt commands
Bluetooth: Reorganize set_connectable HCI command sending
Bluetooth: Move more logic into set_connectable complete callback
Bluetooth: Add missing error handling for Set Connectable
Bluetooth: Move static advertising functions to avoid forward declarations
Bluetooth: Fix updating advertising data needlessly
Bluetooth: Make Set Connectable also update the LE advertising type
Bluetooth: Move set_bredr_scan() to avoid forward declaration
Bluetooth: Fix updating scan mode in set_bredr()
Bluetooth: Convert Set Discoverable to use an asynchronous request
Bluetooth: Reject invalid bdaddr types for sockets
Bluetooth: Check that bind() bdaddr type matches connect()

Johannes Berg (1):
Bluetooth: Fix variable shadow warnings

Marcel Holtmann (117):
Bluetooth: Fix controller list for AMP discover response
Bluetooth: Remove useless external function to count controllers
Bluetooth: Add constants for AMP controller type
Bluetooth: Separate AMP controller type from HCI device type
Bluetooth: Use explicit AMP controller id value for BR/EDR
Bluetooth: Rename AMP status constants and use them
Bluetooth: Remove pointless inline function
Bluetooth: Remove check for number of AMP controller
Bluetooth: Move hci_amp_capable() function into L2CAP core
Bluetooth: Simplify check if L2CAP connection is AMP capable
Bluetooth: Check for non BR/EDR controller in AMP discover response
Bluetooth: Reject enabling controllers without valid addresses
Bluetooth: Use explicit check for BR/EDR device type
Bluetooth: Simplify device type check for AMP discover response
Bluetooth: Use random address if public address is not available
Bluetooth: Add HCI structure for LE advertising parameters command
Bluetooth: Make it clear that disabling LE disables advertising
Bluetooth: Use helper functions for enabling/disabling advertising
Bluetooth: Add constants for LE advertising types
Bluetooth: Set LE advertising parameters before enabling it
Bluetooth: Use helper function for re-enabling advertising
Bluetooth: Remove no longer needed mgmt_new_settings() function
Bluetooth: Remove mgmt_valid_hdev() helper function
Bluetooth: Send new settings only when pairable changes
Bluetooth: Make mgmt_index_added() and mgmt_index_removed() return void
Bluetooth: Make mgmt_set_powered_failed() return void
Bluetooth: Make mgmt_disconnect_failed() return void
Bluetooth: Make mgmt_connect_failed() return void
Bluetooth: Make mgmt_device_connected() return void
Bluetooth: Make mgmt_device_disconnected() return void
Bluetooth: Make mgmt_device_found() return void
Bluetooth: Make mgmt_remote_name() return void
Bluetooth: Make mgmt_discovering() return void
Bluetooth: Power off AMP controllers after setup phase
Bluetooth: Make mgmt power down notification for BR/EDR explicit
Bluetooth: List powered down AMP controllers correctly
Bluetooth: Read supported features and commands on AMP controllers
Bluetooth: Read location data on AMP controller init
Bluetooth: Read flow control mode on AMP controller init
Bluetooth: Remove unneeded val variable when setting SSP
Bluetooth: Restrict high speed support to SSP enabled controllers
Bluetooth: Fix too long line with set_advertising() function
Bluetooth: Use hci_conn_num() for checking number of LE connections
Bluetooth: Use hci_conn_num() instead of direct connection hash access
Bluetooth: AMP contollers do not support the legacy ioctls
Bluetooth: Remove unused bfusb_ioctl() callback
Bluetooth: Remove unused bluecard_hci_ioctl() callback
Bluetooth: Remove unused bt3c_hci_ioctl() callback
Bluetooth: Remove unused btuart_hci_ioctl() callback
Bluetooth: Remove unused dtl1_hci_ioctl() callback
Bluetooth: Remove unused btmrvl_ioctl() callback
Bluetooth: Remove hdev->ioctl driver callback
Bluetooth: Move amp.h header file into net/bluetooth/
Bluetooth: Move a2mp.h header file into net/bluetooth/
Bluetooth: Move smp.h header file into net/bluetooth/
Bluetooth: Move skb->dev assignment for hdev->send into central place
Bluetooth: Remove pointless check of hci_send_frame parameter
Bluetooth: Remove return value from hci_send_frame() function
Bluetooth: Remove unused h4_check_data_len() function
Bluetooth: Provide hdev parameter to hci_recv_frame() driver callback
Bluetooth: Add hdev parameter to hdev->send driver callback
Bluetooth: Remove pointless parameter check in bfusb_send_frame()
Bluetooth: Remove pointless parameter check in bluecard_hci_send_frame()
Bluetooth: Remove pointless parameter check in bt3c_hci_send_frame()
Bluetooth: Remove pointless parameter check in btmrvl_send_frame()
Bluetooth: Remove pointless parameter check in btuart_hci_send_frame()
Bluetooth: Remove pointless parameter check in dtl1_hci_send_frame()
Bluetooth: Remove pointless parameter check in hci_uart_send_frame()
Bluetooth: Remove pointless parameter check in vhci_send_frame()
Bluetooth: Declare btusb_table[] and blacklist_table[] as const
Bluetooth: Declare bfusb_table[] as const
Bluetooth: Declare bpa10x_table[] as const
Bluetooth: Declare ath3k_table[] and ath3k_blist_tbl[] as const
Bluetooth: Make LE scan interval and window a controller option
Bluetooth: Add management command for setting LE scan parameters
Bluetooth: Fix endless loop with HCI_QUIRK_RESET_ON_CLOSE
Bluetooth: Don't advertise high speed support without SSP
Bluetooth: Add MGMT_OP_SET_SCAN_PARAMS to supported commands list
Bluetooth: Fix HCI init for 1st generation BlueFRITZ! devices
Bluetooth: Fix PSM value for L2CAP connectionless data packets
Bluetooth: Limit security mode 4 level 0 to connection oriented channels
Bluetooth: Allow 3D profile to use security mode 4 level 0
Bluetooth: The L2CAP fixed channel connectionless data is supported
Bluetooth: Unicast connectionless data reception is supported
Bluetooth: Remove l2cap_conn->dst usage from AMP manager
Bluetooth: Remove l2cap_conn->src and l2cap_conn->dst usage from SMP
Bluetooth: Remove l2cap_conn->src and l2cap_conn->dst usage from L2CAP
Bluetooth: Remove l2cap_conn->src and l2cap_conn->dst pointers
Bluetooth: Remove pointless bdaddr_to_le() helper function
Bluetooth: Store the source address type of LE connections
Bluetooth: Store source address of HCI connections
Bluetooth: Update source address and type for incoming LE connections
Bluetooth: Use hci_conn->src address for SMP functions
Bluetooth: Use hci_conn->src address for L2CAP functions
Bluetooth: Fix input address type for SMP C1 function
Bluetooth: Fix coding style violations in SMP handling
Bluetooth: Update L2CAP socket source address from HCI connection
Bluetooth: Store address information in L2CAP channel structure
Bluetooth: Return the correct address type for L2CAP sockets
Bluetooth: Access RFCOMM session addresses through L2CAP channel
Bluetooth: Access CMTP session addresses through L2CAP channel
Bluetooth: Access HIDP session addresses through L2CAP channel
Bluetooth: Access BNEP session addresses through L2CAP channel
Bluetooth: Use SCO addresses from HCI connection directly
Bluetooth: Store SCO address information in its own socket structure
Bluetooth: Store RFCOMM address information in its own socket structure
Bluetooth: Remove src and dst fields from bt_sock structure
Bluetooth: Use l2cap_pi(sk) directly where possible
Bluetooth: Add support for per socket msg_name callback
Bluetooth: Provide msg_name callback for L2CAP connectionless channels
Bluetooth: Increase minor version of core module
Bluetooth: Adjust header for proc socket information
Bluetooth: Introduce L2CAP channel flag for defer setup
Bluetooth: Introduce L2CAP channel callback for resuming
Bluetooth: Check that scan window is smaller or equal than scan interval
Bluetooth: Read number of supported IAC on controller setup
Bluetooth: Read current IAC LAP on controller setup

drivers/bluetooth/ath3k.c | 4 +-
drivers/bluetooth/bfusb.c | 31 +--
drivers/bluetooth/bluecard_cs.c | 30 +--
drivers/bluetooth/bpa10x.c | 11 +-
drivers/bluetooth/bt3c_cs.c | 30 +--
drivers/bluetooth/btmrvl_main.c | 26 +-
drivers/bluetooth/btmrvl_sdio.c | 8 +-
drivers/bluetooth/btsdio.c | 6 +-
drivers/bluetooth/btuart_cs.c | 30 +--
drivers/bluetooth/btusb.c | 21 +-
drivers/bluetooth/btwilink.c | 9 +-
drivers/bluetooth/dtl1_cs.c | 30 +--
drivers/bluetooth/hci_bcsp.c | 5 +-
drivers/bluetooth/hci_h4.c | 24 --
drivers/bluetooth/hci_h5.c | 2 +-
drivers/bluetooth/hci_ldisc.c | 12 +-
drivers/bluetooth/hci_ll.c | 14 +-
drivers/bluetooth/hci_vhci.c | 15 +-
include/net/bluetooth/bluetooth.h | 5 +-
include/net/bluetooth/hci.h | 49 +++-
include/net/bluetooth/hci_core.h | 79 ++-----
include/net/bluetooth/l2cap.h | 14 +-
include/net/bluetooth/mgmt.h | 7 +
include/net/bluetooth/rfcomm.h | 2 +
include/net/bluetooth/sco.h | 5 +-
net/bluetooth/a2mp.c | 63 ++---
{include/net => net}/bluetooth/a2mp.h | 0
net/bluetooth/af_bluetooth.c | 23 +-
net/bluetooth/amp.c | 10 +-
{include/net => net}/bluetooth/amp.h | 0
net/bluetooth/bnep/core.c | 18 +-
net/bluetooth/cmtp/core.c | 6 +-
net/bluetooth/hci_conn.c | 156 ++++++++----
net/bluetooth/hci_core.c | 156 +++++++-----
net/bluetooth/hci_event.c | 103 ++++----
net/bluetooth/hci_sock.c | 10 +-
net/bluetooth/hidp/core.c | 18 +-
net/bluetooth/l2cap_core.c | 221 ++++++++++-------
net/bluetooth/l2cap_sock.c | 86 +++++--
net/bluetooth/mgmt.c | 550 ++++++++++++++++++++++++++++++-------------
net/bluetooth/rfcomm/core.c | 19 +-
net/bluetooth/rfcomm/sock.c | 28 ++-
net/bluetooth/sco.c | 44 ++--
net/bluetooth/smp.c | 81 ++++---
{include/net => net}/bluetooth/smp.h | 0
45 files changed, 1192 insertions(+), 869 deletions(-)
rename {include/net => net}/bluetooth/a2mp.h (100%)
rename {include/net => net}/bluetooth/amp.h (100%)
rename {include/net => net}/bluetooth/smp.h (100%)

Attachment: pgp00000.pgp
Description: PGP signature

Next message: Soren Brinkmann: "[PATCH RFC 0/5] Ethernet support for Zynq"
Previous message: Bjorn Helgaas: "Re: [3.11.4] Thunderbolt/PCI unplug oops in pci_pme_list_scan"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]