Re: [PATCH 2/2] mmc: dw_mmc: Protect read-modify-write of INTMASKwith a lock

[James Hogan]

Hi Doug.

Nice catch.

On 15/10/13 23:39, Doug Anderson wrote:
> We're running into cases where our enabling of the SDIO interrupt in
> dw_mmc doesn't actually take effect.  Specifically, adding patch like
> this:
> 
>  +++ b/drivers/mmc/host/dw_mmc.c
>  @@ -1076,6 +1076,9 @@ static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
> 
>       mci_writel(host, INTMASK,
>            (int_mask | SDMMC_INT_SDIO(slot->id)));
>  +    int_mask = mci_readl(host, INTMASK);
>  +    if (!(int_mask & SDMMC_INT_SDIO(slot->id)))
>  +      dev_err(&mmc->class_dev, "failed to enable sdio irq\n");
>     } else {
> 
> ...actually triggers the error message.  That's because the
> dw_mci_enable_sdio_irq() unsafely does a read-modify-write of the
> INTMASK register.
> 
> We can't just use the standard host->lock since that lock is not irq
> safe and mmc_signal_sdio_irq() (called from interrupt context) calls
> dw_mci_enable_sdio_irq().  Add a new irq-safe lock to protect INTMASK.
> 
> An alternate solution to this is to punt mmc_signal_sdio_irq() to the
> tasklet and then protect INTMASK modifications by the standard host
> lock.  This seemed like a bit more of a high-latency change.

A probably lighter-weight alternative to that alternative is to just
make the existing lock irq safe. Has this been considered?

I'm not entirely convinced it's worth having a separate lock rather than
changing the existing one, but the patch still appears to be correct, so:
Reviewed-by: James Hogan <james.hogan@xxxxxxxxxx>

Cheers
James

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/