[PATCH] WAN: Adding support for Infineon PEF2256 E1 chipset
From: Christophe Leroy
Date: Wed Oct 16 2013 - 11:25:46 EST
The patch adds WAN support for Infineon PEF2256 E1 Chipset.
Signed-off-by: Jerome Chantelauze <jerome.chantelauze@xxxxxx>
Acked-by: Christophe Leroy <christophe.leroy@xxxxxx>
diff -urN a/drivers/net/wan/pef2256.c b/drivers/net/wan/pef2256.c
--- a/drivers/net/wan/pef2256.c 1970-01-01 01:00:00.000000000 +0100
+++ b/drivers/net/wan/pef2256.c 2013-10-13 13:05:01.000000000 +0200
@@ -0,0 +1,1124 @@
+/*
+ * drivers/net/wan/pef2256.c : a PEF2256 HDLC driver for Linux
+ *
+ * This software may be used and distributed according to the terms of the
+ * GNU General Public License.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+
+#include <linux/cache.h>
+#include <asm/byteorder.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+
+#include <linux/if_arp.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/hdlc.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/etherdevice.h>
+#include "pef2256.h"
+
+static irqreturn_t pef2256_irq(int irq, void *dev_priv);
+static int Config_HDLC(struct pef2256_dev_priv *priv);
+static int init_FALC(struct pef2256_dev_priv *priv);
+static int pef2256_open(struct net_device *netdev);
+static int pef2256_close(struct net_device *netdev);
+
+void print_regs(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct pef2256_dev_priv *priv = dev_to_hdlc(ndev)->priv;
+ struct pef2256_regs *base_addr = (struct pef2256_regs *)priv->base_addr;
+
+ netdev_info(ndev, " MODE = 0x%02x\n", base_addr->MODE);
+ netdev_info(ndev, " RAH1 = 0x%02x\n", base_addr->RAH1);
+ netdev_info(ndev, " RAH2 = 0x%02x\n", base_addr->RAH2);
+ netdev_info(ndev, " RAL1 = 0x%02x\n", base_addr->RAL1);
+ netdev_info(ndev, " RAL2 = 0x%02x\n", base_addr->RAL2);
+ netdev_info(ndev, " IPC = 0x%02x\n", base_addr->IPC);
+ netdev_info(ndev, " CCR1 = 0x%02x\n", base_addr->CCR1);
+ netdev_info(ndev, " CCR2 = 0x%02x\n", base_addr->CCR2);
+ netdev_info(ndev, " RTR1 = 0x%02x\n", base_addr->RTR1);
+ netdev_info(ndev, " RTR2 = 0x%02x\n", base_addr->RTR2);
+ netdev_info(ndev, " RTR3 = 0x%02x\n", base_addr->RTR3);
+ netdev_info(ndev, " RTR4 = 0x%02x\n", base_addr->RTR4);
+ netdev_info(ndev, " TTR1 = 0x%02x\n", base_addr->TTR1);
+ netdev_info(ndev, " TTR2 = 0x%02x\n", base_addr->TTR2);
+ netdev_info(ndev, " TTR3 = 0x%02x\n", base_addr->TTR3);
+ netdev_info(ndev, " TTR4 = 0x%02x\n", base_addr->TTR4);
+ netdev_info(ndev, " IMR0 = 0x%02x\n", base_addr->IMR0);
+ netdev_info(ndev, " IMR1 = 0x%02x\n", base_addr->IMR1);
+ netdev_info(ndev, " IMR2 = 0x%02x\n", base_addr->IMR2);
+ netdev_info(ndev, " IMR3 = 0x%02x\n", base_addr->IMR3);
+ netdev_info(ndev, " IMR4 = 0x%02x\n", base_addr->IMR4);
+ netdev_info(ndev, " IMR5 = 0x%02x\n", base_addr->IMR5);
+ netdev_info(ndev, " IERR = 0x%02x\n", base_addr->IERR);
+ netdev_info(ndev, " FMR0 = 0x%02x\n", base_addr->FMR0);
+ netdev_info(ndev, " FMR1 = 0x%02x\n", base_addr->FMR1);
+ netdev_info(ndev, " FMR2 = 0x%02x\n", base_addr->FMR2);
+ netdev_info(ndev, " LOOP = 0x%02x\n", base_addr->LOOP);
+ netdev_info(ndev, " XSW = 0x%02x\n", base_addr->XSW);
+ netdev_info(ndev, " XSP = 0x%02x\n", base_addr->XSP);
+ netdev_info(ndev, " XC0 = 0x%02x\n", base_addr->XC0);
+ netdev_info(ndev, " XC1 = 0x%02x\n", base_addr->XC1);
+ netdev_info(ndev, " RC0 = 0x%02x\n", base_addr->RC0);
+ netdev_info(ndev, " RC1 = 0x%02x\n", base_addr->RC1);
+ netdev_info(ndev, " XPM0 = 0x%02x\n", base_addr->XPM0);
+ netdev_info(ndev, " XPM1 = 0x%02x\n", base_addr->XPM1);
+ netdev_info(ndev, " XPM2 = 0x%02x\n", base_addr->XPM2);
+ netdev_info(ndev, " TSWM = 0x%02x\n", base_addr->TSWM);
+ netdev_info(ndev, " IDLE = 0x%02x\n", base_addr->IDLE);
+ netdev_info(ndev, " XSA4 = 0x%02x\n", base_addr->XSA4);
+ netdev_info(ndev, " XSA5 = 0x%02x\n", base_addr->XSA5);
+ netdev_info(ndev, " XSA6 = 0x%02x\n", base_addr->XSA6);
+ netdev_info(ndev, " XSA7 = 0x%02x\n", base_addr->XSA7);
+ netdev_info(ndev, " XSA8 = 0x%02x\n", base_addr->XSA8);
+ netdev_info(ndev, " FMR3 = 0x%02x\n", base_addr->FMR3);
+ netdev_info(ndev, " ICB1 = 0x%02x\n", base_addr->ICB1);
+ netdev_info(ndev, " ICB2 = 0x%02x\n", base_addr->ICB2);
+ netdev_info(ndev, " ICB3 = 0x%02x\n", base_addr->ICB3);
+ netdev_info(ndev, " ICB4 = 0x%02x\n", base_addr->ICB4);
+ netdev_info(ndev, " LIM0 = 0x%02x\n", base_addr->LIM0);
+ netdev_info(ndev, " LIM1 = 0x%02x\n", base_addr->LIM1);
+ netdev_info(ndev, " PCD = 0x%02x\n", base_addr->PCD);
+ netdev_info(ndev, " PCR = 0x%02x\n", base_addr->PCR);
+ netdev_info(ndev, " LIM2 = 0x%02x\n", base_addr->LIM2);
+ netdev_info(ndev, " LCR1 = 0x%02x\n", base_addr->LCR1);
+ netdev_info(ndev, " LCR2 = 0x%02x\n", base_addr->LCR2);
+ netdev_info(ndev, " LCR3 = 0x%02x\n", base_addr->LCR3);
+ netdev_info(ndev, " SIC1 = 0x%02x\n", base_addr->SIC1);
+ netdev_info(ndev, " SIC2 = 0x%02x\n", base_addr->SIC2);
+ netdev_info(ndev, " SIC3 = 0x%02x\n", base_addr->SIC3);
+ netdev_info(ndev, " CMR1 = 0x%02x\n", base_addr->CMR1);
+ netdev_info(ndev, " CMR2 = 0x%02x\n", base_addr->CMR2);
+ netdev_info(ndev, " GCR = 0x%02x\n", base_addr->GCR);
+ netdev_info(ndev, " ESM = 0x%02x\n", base_addr->ESM);
+ netdev_info(ndev, " CMR3 = 0x%02x\n", base_addr->CMR3);
+ netdev_info(ndev, " PC1 = 0x%02x\n", base_addr->PC1);
+ netdev_info(ndev, " PC2 = 0x%02x\n", base_addr->PC2);
+ netdev_info(ndev, " PC3 = 0x%02x\n", base_addr->PC3);
+ netdev_info(ndev, " PC4 = 0x%02x\n", base_addr->PC4);
+ netdev_info(ndev, " PC5 = 0x%02x\n", base_addr->PC5);
+ netdev_info(ndev, " GPC1 = 0x%02x\n", base_addr->GPC1);
+ netdev_info(ndev, " PC6 = 0x%02x\n", base_addr->PC6);
+ netdev_info(ndev, " CCR3 = 0x%02x\n", base_addr->CCR3);
+ netdev_info(ndev, " CCR4 = 0x%02x\n", base_addr->CCR4);
+ netdev_info(ndev, " CCR5 = 0x%02x\n", base_addr->CCR5);
+ netdev_info(ndev, " MODE2 = 0x%02x\n", base_addr->MODE2);
+ netdev_info(ndev, " MODE3 = 0x%02x\n", base_addr->MODE3);
+ netdev_info(ndev, " RBC2 = 0x%02x\n", base_addr->RBC2);
+ netdev_info(ndev, " RBC3 = 0x%02x\n", base_addr->RBC3);
+ netdev_info(ndev, " GCM1 = 0x%02x\n", base_addr->GCM1);
+ netdev_info(ndev, " GCM2 = 0x%02x\n", base_addr->GCM2);
+ netdev_info(ndev, " GCM3 = 0x%02x\n", base_addr->GCM3);
+ netdev_info(ndev, " GCM4 = 0x%02x\n", base_addr->GCM4);
+ netdev_info(ndev, " GCM5 = 0x%02x\n", base_addr->GCM5);
+ netdev_info(ndev, " GCM6 = 0x%02x\n", base_addr->GCM6);
+ netdev_info(ndev, " SIS2/GCM7 = 0x%02x\n", base_addr->Dif1.SIS2);
+ netdev_info(ndev, " RSIS2/GCM8 = 0x%02x\n",
+ base_addr->Dif2.RSIS2);
+ netdev_info(ndev, " TSEO = 0x%02x\n", base_addr->TSEO);
+ netdev_info(ndev, " TSBS1 = 0x%02x\n", base_addr->TSBS1);
+ netdev_info(ndev, " TSBS2 = 0x%02x\n", base_addr->TSBS2);
+ netdev_info(ndev, " TSBS3 = 0x%02x\n", base_addr->TSBS3);
+ netdev_info(ndev, " TSS2 = 0x%02x\n", base_addr->TSS2);
+ netdev_info(ndev, " TSS3 = 0x%02x\n", base_addr->TSS3);
+ netdev_info(ndev, " Res10 = 0x%02x\n", base_addr->Res10);
+ netdev_info(ndev, " Res11 = 0x%02x\n", base_addr->Res11);
+ netdev_info(ndev, " TPC0 = 0x%02x\n", base_addr->TPC0);
+ netdev_info(ndev, " GLC1 = 0x%02x\n", base_addr->GLC1);
+}
+
+static ssize_t fs_attr_regs_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ print_regs(dev);
+ return sprintf(buf, "*** printk DEBUG ***\n");
+}
+
+static DEVICE_ATTR(regs, S_IRUGO, fs_attr_regs_show, NULL);
+
+static ssize_t fs_attr_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct pef2256_dev_priv *priv = dev_to_hdlc(ndev)->priv;
+
+ return sprintf(buf, "%d\n", priv->mode);
+}
+
+
+static ssize_t fs_attr_mode_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct pef2256_dev_priv *priv = dev_to_hdlc(ndev)->priv;
+ u32 value;
+ int ret = kstrtol(buf, 10, (long int *)&value);
+ int reconfigure = (value != priv->mode);
+
+ if (ret != 0)
+ return ret;
+
+ if (value != MASTER_MODE && value != SLAVE_MODE)
+ return -EINVAL;
+
+ priv->mode = value;
+ if (reconfigure && priv->init_done) {
+ pef2256_close(ndev);
+ init_FALC(priv);
+ pef2256_open(ndev);
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, fs_attr_mode_show,
+ fs_attr_mode_store);
+
+
+
+static ssize_t fs_attr_Tx_TS_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct pef2256_dev_priv *priv = dev_to_hdlc(ndev)->priv;
+
+ return sprintf(buf, "0x%08x\n", priv->Tx_TS);
+}
+
+
+static ssize_t fs_attr_Tx_TS_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct pef2256_dev_priv *priv = dev_to_hdlc(ndev)->priv;
+ u32 value;
+ int ret = kstrtol(buf, 10, (long int *)&value);
+ int reconfigure = (value != priv->mode);
+
+ if (ret != 0)
+ return ret;
+
+ /* TS 0 is reserved */
+ if (value & 0x80000000)
+ return -EINVAL;
+
+ priv->Tx_TS = value;
+ if (reconfigure && priv->init_done)
+ Config_HDLC(priv);
+
+ return count;
+}
+
+static DEVICE_ATTR(Tx_TS, S_IRUGO | S_IWUSR, fs_attr_Tx_TS_show,
+ fs_attr_Tx_TS_store);
+
+
+static ssize_t fs_attr_Rx_TS_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct pef2256_dev_priv *priv = dev_to_hdlc(ndev)->priv;
+
+ return sprintf(buf, "0x%08x\n", priv->Rx_TS);
+}
+
+
+static ssize_t fs_attr_Rx_TS_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct pef2256_dev_priv *priv = dev_to_hdlc(ndev)->priv;
+ u32 value;
+ int ret = kstrtol(buf, 10, (long int *)&value);
+ int reconfigure = (value != priv->mode);
+
+ if (ret != 0)
+ return ret;
+
+ /* TS 0 is reserved */
+ if (value & 0x80000000)
+ return -EINVAL;
+
+ priv->Rx_TS = value;
+ if (reconfigure && priv->init_done)
+ Config_HDLC(priv);
+
+ return count;
+}
+
+static DEVICE_ATTR(Rx_TS, S_IRUGO | S_IWUSR, fs_attr_Rx_TS_show,
+ fs_attr_Rx_TS_store);
+
+/*
+ * Setting up HDLC channel
+ */
+int Config_HDLC(struct pef2256_dev_priv *priv)
+{
+ int i;
+ int TS_idx;
+ struct pef2256_regs *base_addr;
+ u8 dummy;
+
+ /* Set framer E1 address */
+ base_addr = (struct pef2256_regs *)priv->base_addr;
+
+ /* Read to remove pending IT */
+ dummy = base_addr->ISR0;
+ dummy = base_addr->ISR1;
+
+ /* Mask HDLC 1 Transmit IT */
+ base_addr->IMR1 |= 1;
+ base_addr->IMR1 |= 1 << 4;
+ base_addr->IMR1 |= 1 << 5;
+
+ /* Mask HDLC 1 Receive IT */
+ base_addr->IMR0 |= 1;
+ base_addr->IMR0 |= 1 << 7;
+ base_addr->IMR1 |= 1 << 6;
+
+ udelay((2 * 32) * 125);
+
+ /* MODE.HRAC = 0 (Receiver inactive)
+ MODE.DIV = 0 (Data normal operation)
+ for FALC V2.2 : MODE.HDLCI = 0 (normal operation) */
+ /* MODE.MDS2:0 = 100 (No address comparison) */
+ /* MODE.HRAC = 1 (Receiver active) */
+ out_8(&(base_addr->MODE), 1 << 3);
+ /* CCR1.EITS = 1 (Enable internal Time Slot 31:0 Signaling)
+ CCR1.XMFA = 0 (No transmit multiframe alignment)
+ CCR1.RFT1:0 = 00 (RFIFO sur 32 bytes) */
+ /* setting up Interframe Time Fill */
+ /* CCR1.ITF = 1 (Interframe Time Fill Continuous flag) */
+ out_8(&(base_addr->CCR1), 0x10 | (1 << 3));
+ /* CCR2.XCRC = 0 (Transmit CRC ON)
+ CCR2.RCRC = 0 (Receive CRC ON, no write in RFIFO)
+ CCR2.RADD = 0 (No write address in RFIFO) */
+ out_8(&(base_addr->CCR2), 0x00);
+
+ udelay((2 * 32) * 125);
+
+ /* MODE.HRAC = 0 (Receiver inactive)
+ MODE.DIV = 0 (Data normal operation)
+ for FALC V2.2 : MODE.HDLCI = 0 (normal operation) */
+ /* MODE.MDS2:0 = 100 (No address comparison) */
+ /* MODE.HRAC = 1 (Receiver active) */
+ out_8(&(base_addr->MODE), 1 << 3);
+ /* CCR1.EITS = 1 (Enable internal Time Slot 31:0 Signaling)
+ CCR1.XMFA = 0 (No transmit multiframe alignment)
+ CCR1.RFT1:0 = 00 (RFIFO sur 32 bytes) */
+ /* setting up Interframe Time Fill */
+ /* CCR1.ITF = 1 (Interframe Time Fill Continuous flag) */
+ out_8(&(base_addr->CCR1), 0x10 | (1 << 3));
+ /* CCR2.XCRC = 0 (Transmit CRC ON)
+ CCR2.RCRC = 0 (Receive CRC ON, no write in RFIFO)
+ CCR2.RADD = 0 (No write address in RFIFO) */
+ out_8(&(base_addr->CCR2), 0x00);
+
+ udelay((2 * 32) * 125);
+
+ /* MODE.HRAC = 0 (Receiver inactive)
+ MODE.DIV = 0 (Data normal operation)
+ for FALC V2.2 : MODE.HDLCI = 0 (normal operation) */
+ /* MODE.MDS2:0 = 100 (No address comparison) */
+ /* MODE.HRAC = 1 (Receiver active) */
+ out_8(&(base_addr->MODE), 1 << 3);
+ /* CCR1.EITS = 1 (Enable internal Time Slot 31:0 Signaling)
+ CCR1.XMFA = 0 (No transmit multiframe alignment)
+ CCR1.RFT1:0 = 00 (RFIFO sur 32 bytes) */
+ /* setting up Interframe Time Fill */
+ /* CCR1.ITF = 1 (Interframe Time Fill Continuous flag) */
+ out_8(&(base_addr->CCR1), 0x10 | (1 << 3));
+ /* CCR2.XCRC = 0 (Transmit CRC ON)
+ CCR2.RCRC = 0 (Receive CRC ON, no write in RFIFO)
+ CCR2.RADD = 0 (No write address in RFIFO) */
+ out_8(&(base_addr->CCR2), 0x00);
+
+ udelay((2 * 32) * 125);
+
+ /* Init Time Slot select */
+ out_8(&(base_addr->TTR1), 0x00);
+ out_8(&(base_addr->TTR2), 0x00);
+ out_8(&(base_addr->TTR3), 0x00);
+ out_8(&(base_addr->TTR4), 0x00);
+ out_8(&(base_addr->RTR1), 0x00);
+ out_8(&(base_addr->RTR2), 0x00);
+ out_8(&(base_addr->RTR3), 0x00);
+ out_8(&(base_addr->RTR4), 0x00);
+ /* Set selected TS bits */
+ /* Starting at TS 1, TS 0 is reserved */
+ for (TS_idx = 1; TS_idx < 32; TS_idx++) {
+ i = 7 - (TS_idx % 8);
+ switch (TS_idx / 8) {
+ case 0:
+ if (priv->Tx_TS & (1 << (31 - TS_idx)))
+ setbits8(&(base_addr->TTR1), 1 << i);
+ if (priv->Rx_TS & (1 << (31 - TS_idx)))
+ setbits8(&(base_addr->RTR1), 1 << i);
+ break;
+ case 1:
+ if (priv->Tx_TS & (1 << (31 - TS_idx)))
+ setbits8(&(base_addr->TTR2), 1 << i);
+ if (priv->Rx_TS & (1 << (31 - TS_idx)))
+ setbits8(&(base_addr->RTR2), 1 << i);
+ break;
+ case 2:
+ if (priv->Tx_TS & (1 << (31 - TS_idx)))
+ setbits8(&(base_addr->TTR3), 1 << i);
+ if (priv->Rx_TS & (1 << (31 - TS_idx)))
+ setbits8(&(base_addr->RTR3), 1 << i);
+ break;
+ case 3:
+ if (priv->Tx_TS & (1 << (31 - TS_idx)))
+ setbits8(&(base_addr->TTR4), 1 << i);
+ if (priv->Rx_TS & (1 << (31 - TS_idx)))
+ setbits8(&(base_addr->RTR4), 1 << i);
+ break;
+ }
+ }
+
+ /* Unmask HDLC 1 Transmit IT */
+ base_addr->IMR1 &= ~1;
+ base_addr->IMR1 &= ~(1 << 4);
+ base_addr->IMR1 &= ~(1 << 5);
+
+ /* Unmask HDLC 1 Receive IT */
+ base_addr->IMR0 &= ~1;
+ base_addr->IMR0 &= ~(1 << 7);
+ base_addr->IMR1 &= ~(1 << 6);
+
+ return 0;
+}
+
+
+/*
+ * Init FALC56
+ */
+static int init_FALC(struct pef2256_dev_priv *priv)
+{
+ struct pef2256_regs *base_addr;
+ int Version;
+
+ /* Get controller version */
+ Version = priv->component_id;
+
+ /* Init FALC56 */
+ base_addr = (struct pef2256_regs *)priv->base_addr;
+ /* RCLK output : DPLL clock, DCO-X enabled, DCO-X internal reference
+ clock */
+ out_8(&(base_addr->CMR1), 0x00);
+ /* SCLKR selected, SCLKX selected, receive synchro pulse sourced by
+ SYPR, transmit synchro pulse sourced by SYPX */
+ out_8(&(base_addr->CMR2), 0x00);
+ /* NRZ coding, no alarm simulation */
+ out_8(&(base_addr->FMR0), 0x00);
+ /* E1 double frame format, 2 Mbit/s system data rate, no AIS
+ transmission to remote end or system interface, payload loop
+ off, transmit remote alarm on */
+ out_8(&(base_addr->FMR1), 0x00);
+ out_8(&(base_addr->FMR2), 0x02);
+ /* E1 default for LIM2 */
+ out_8(&(base_addr->LIM2), 0x20);
+ if (priv->mode == MASTER_MODE)
+ /* SEC input, active high */
+ out_8(&(base_addr->GPC1), 0x00);
+ else
+ /* FSC output, active high */
+ out_8(&(base_addr->GPC1), 0x40);
+ /* internal second timer, power on */
+ out_8(&(base_addr->GCR), 0x00);
+ /* slave mode, local loop off, mode short-haul */
+ if (Version == VERSION_1_2)
+ out_8(&(base_addr->LIM0), 0x00);
+ else
+ out_8(&(base_addr->LIM0), 0x08);
+ /* analog interface selected, remote loop off */
+ out_8(&(base_addr->LIM1), 0x00);
+ if (Version == VERSION_1_2) {
+ /* function of ports RP(A to D) : output receive sync pulse
+ function of ports XP(A to D) : output transmit line clock */
+ out_8(&(base_addr->PC1), 0x77);
+ out_8(&(base_addr->PC2), 0x77);
+ out_8(&(base_addr->PC3), 0x77);
+ out_8(&(base_addr->PC4), 0x77);
+ } else {
+ /* function of ports RP(A to D) : output high
+ function of ports XP(A to D) : output high */
+ out_8(&(base_addr->PC1), 0xAA);
+ out_8(&(base_addr->PC2), 0xAA);
+ out_8(&(base_addr->PC3), 0xAA);
+ out_8(&(base_addr->PC4), 0xAA);
+ }
+ /* function of port RPA : input SYPR
+ function of port XPA : input SYPX */
+ out_8(&(base_addr->PC1), 0x00);
+ /* SCLKR, SCLKX, RCLK configured to inputs,
+ XFMS active low, CLK1 and CLK2 pin configuration */
+ out_8(&(base_addr->PC5), 0x00);
+ out_8(&(base_addr->PC6), 0x00);
+ /* the receive clock offset is cleared
+ the receive time slot offset is cleared */
+ out_8(&(base_addr->RC0), 0x00);
+ out_8(&(base_addr->RC1), 0x9C);
+ /* 2.048 MHz system clocking rate, receive buffer 2 frames, transmit
+ buffer bypass, data sampled and transmitted on the falling edge of
+ SCLKR/X, automatic freeze signaling, data is active in the first
+ channel phase */
+ out_8(&(base_addr->SIC1), 0x00);
+ out_8(&(base_addr->SIC2), 0x00);
+ out_8(&(base_addr->SIC3), 0x00);
+ /* channel loop-back and single frame mode are disabled */
+ out_8(&(base_addr->LOOP), 0x00);
+ /* all bits of the transmitted service word are cleared */
+ out_8(&(base_addr->XSW), 0x1F);
+ /* spare bit values are cleared */
+ out_8(&(base_addr->XSP), 0x00);
+ /* no transparent mode active */
+ out_8(&(base_addr->TSWM), 0x00);
+ /* the transmit clock offset is cleared
+ the transmit time slot offset is cleared */
+ out_8(&(base_addr->XC0), 0x00);
+ out_8(&(base_addr->XC1), 0x9C);
+ /* transmitter in tristate mode */
+ out_8(&(base_addr->XPM2), 0x40);
+ /* transmit pulse mask */
+ if (Version != VERSION_1_2)
+ out_8(&(base_addr->XPM0), 0x9C);
+
+ if (Version == VERSION_1_2) {
+ /* master clock is 16,384 MHz (flexible master clock) */
+ out_8(&(base_addr->GCM2), 0x58);
+ out_8(&(base_addr->GCM3), 0xD2);
+ out_8(&(base_addr->GCM4), 0xC2);
+ out_8(&(base_addr->GCM5), 0x07);
+ out_8(&(base_addr->GCM6), 0x10);
+ } else {
+ /* master clock is 16,384 MHz (flexible master clock) */
+ out_8(&(base_addr->GCM2), 0x18);
+ out_8(&(base_addr->GCM3), 0xFB);
+ out_8(&(base_addr->GCM4), 0x0B);
+ out_8(&(base_addr->GCM5), 0x01);
+ out_8(&(base_addr->GCM6), 0x0B);
+ out_8(&(base_addr->Dif1.GCM7), 0xDB);
+ out_8(&(base_addr->Dif2.GCM8), 0xDF);
+ }
+
+ /* master mode => LIM0.MAS = 1 (bit 0) */
+ if (priv->mode == MASTER_MODE)
+ setbits8(&(base_addr->LIM0), 1 << 0);
+
+ /* transmit line in normal operation => XPM2.XLT = 0 (bit 6) */
+ clrbits8(&(base_addr->XPM2), 1 << 6);
+
+ if (Version == VERSION_1_2) {
+ /* receive input threshold = 0,21V =>
+ LIM1.RIL2:0 = 101 (bits 6, 5 et 4) */
+ setbits8(&(base_addr->LIM1), 1 << 4);
+ setbits8(&(base_addr->LIM1), 1 << 6);
+ } else {
+ /* receive input threshold = 0,21V =>
+ LIM1.RIL2:0 = 100 (bits 6, 5 et 4) */
+ setbits8(&(base_addr->LIM1), 1 << 6);
+ }
+ /* transmit line coding = HDB3 => FMR0.XC1:0 = 11 (bits 7 et 6) */
+ setbits8(&(base_addr->FMR0), 1 << 6);
+ setbits8(&(base_addr->FMR0), 1 << 7);
+ /* receive line coding = HDB3 => FMR0.RC1:0 = 11 (bits 5 et 4) */
+ setbits8(&(base_addr->FMR0), 1 << 4);
+ setbits8(&(base_addr->FMR0), 1 << 5);
+ /* detection of LOS alarm = 176 pulses (soit (10 + 1) * 16) */
+ out_8(&(base_addr->PCD), 10);
+ /* recovery of LOS alarm = 22 pulses (soit 21 + 1) */
+ out_8(&(base_addr->PCR), 21);
+ /* DCO-X center frequency => CMR2.DCOXC = 1 (bit 5) */
+ setbits8(&(base_addr->CMR2), 1 << 5);
+ if (priv->mode == SLAVE_MODE) {
+ /* select RCLK source = 2M => CMR1.RS(1:0) = 10 (bits 5 et 4) */
+ setbits8(&(base_addr->CMR1), 1 << 5);
+ /* disable switching RCLK -> SYNC => CMR1.DCS = 1 (bit 3) */
+ setbits8(&(base_addr->CMR1), 1 << 3);
+ }
+ if (Version != VERSION_1_2)
+ /* during inactive channel phase RDO into tri-state mode */
+ setbits8(&(base_addr->SIC3), 1 << 5);
+ if (!strcmp(priv->rising_edge_sync_pulse, "transmit")) {
+ /* rising edge sync pulse transmit => SIC3.RESX = 1 (bit 3) */
+ setbits8(&(base_addr->SIC3), 1 << 3);
+ } else {
+ /* rising edge sync pulse receive => SIC3.RESR = 1 (bit 2) */
+ setbits8(&(base_addr->SIC3), 1 << 2);
+ }
+ /* transmit offset counter = 4
+ => XC0.XCO10:8 = 000 (bits 2, 1 et 0);
+ XC1.XCO7:0 = 4 (bits 7 ... 0) */
+ out_8(&(base_addr->XC1), 4);
+ /* receive offset counter = 4
+ => RC0.RCO10:8 = 000 (bits 2, 1 et 0);
+ RC1.RCO7:0 = 4 (bits 7 ... 0) */
+ out_8(&(base_addr->RC1), 4);
+
+ /* clocking rate 8M and data rate 2M on the system highway */
+ setbits8(&(base_addr->SIC1), 1 << 7);
+ /* data rate 4M on the system highway */
+ if (priv->data_rate == DATA_RATE_4M)
+ setbits8(&(base_addr->FMR1), 1 << 1);
+ /* data rate 8M on the system highway */
+ if (priv->data_rate == DATA_RATE_8M)
+ setbits8(&(base_addr->SIC1), 1 << 6);
+ /* channel phase for FALC56 */
+ if ((priv->channel_phase == CHANNEL_PHASE_1)
+ || (priv->channel_phase == CHANNEL_PHASE_3))
+ setbits8(&(base_addr->SIC2), 1 << 1);
+ if ((priv->channel_phase == CHANNEL_PHASE_2)
+ || (priv->channel_phase == CHANNEL_PHASE_3))
+ setbits8(&(base_addr->SIC2), 1 << 2);
+
+ if (priv->mode == SLAVE_MODE) {
+ /* transmit buffer size = 2 frames =>
+ SIC1.XBS1:0 = 10 (bits 1 et 0) */
+ setbits8(&(base_addr->SIC1), 1 << 1);
+ }
+
+ /* transmit in multiframe => FMR1.XFS = 1 (bit 3) */
+ setbits8(&(base_addr->FMR1), 1 << 3);
+ /* receive in multiframe => FMR2.RFS1:0 = 10 (bits 7 et 6) */
+ setbits8(&(base_addr->FMR2), 1 << 7);
+ /* Automatic transmission of submultiframe status =>
+ XSP.AXS = 1 (bit 3) */
+ setbits8(&(base_addr->XSP), 1 << 3);
+
+ /* error counter mode toutes les 1s => FMR1.ECM = 1 (bit 2) */
+ setbits8(&(base_addr->FMR1), 1 << 2);
+ /* error counter mode COFA => GCR.ECMC = 1 (bit 4) */
+ setbits8(&(base_addr->GCR), 1 << 4);
+ /* errors in service words with no influence => RC0.SWD = 1 (bit 7) */
+ setbits8(&(base_addr->RC0), 1 << 7);
+ /* 4 consecutive incorrect FAS = loss of sync => RC0.ASY4 = 1 (bit 6) */
+ setbits8(&(base_addr->RC0), 1 << 6);
+ /* Si-Bit in service word from XDI => XSW.XSIS = 1 (bit 7) */
+ setbits8(&(base_addr->XSW), 1 << 7);
+ /* Si-Bit in FAS word from XDI => XSP.XSIF = 1 (bit 2) */
+ setbits8(&(base_addr->XSP), 1 << 2);
+
+ /* port RCLK is output => PC5.CRP = 1 (bit 0) */
+ setbits8(&(base_addr->PC5), 1 << 0);
+ /* visibility of the masked interrupts => GCR.VIS = 1 (bit 7) */
+ setbits8(&(base_addr->GCR), 1 << 7);
+ /* reset lines
+ => CMDR.RRES = 1 (bit 6); CMDR.XRES = 1 (bit 4);
+ CMDR.SRES = 1 (bit 0) */
+ out_8(&(base_addr->CMDR), 0x51);
+
+ return 0;
+}
+
+
+
+static int pef2256_open(struct net_device *netdev)
+{
+ struct pef2256_dev_priv *priv = dev_to_hdlc(netdev)->priv;
+ struct pef2256_regs *base_addr = (struct pef2256_regs *)priv->base_addr;
+ int ret;
+
+ if (hdlc_open(netdev))
+ return -EAGAIN;
+
+ ret = request_irq(priv->irq, pef2256_irq, 0, "e1-wan", priv);
+ if (ret) {
+ dev_err(priv->dev, "Cannot request irq. Device seems busy.\n");
+ return -EBUSY;
+ }
+
+ if (priv->component_id != VERSION_UNDEF) {
+ ret = init_FALC(priv);
+ } else {
+ dev_err(priv->dev, "Composant ident (%X/%X) = %d\n",
+ base_addr->VSTR, base_addr->WID, priv->component_id);
+ ret = -ENODEV;
+ }
+
+ if (ret < 0)
+ return ret;
+
+ priv->tx_skb = NULL;
+ priv->rx_len = 0;
+
+ Config_HDLC(priv);
+
+ netif_carrier_on(netdev);
+ netif_start_queue(netdev);
+
+ priv->init_done = 1;
+
+ return 0;
+}
+
+
+static int pef2256_close(struct net_device *netdev)
+{
+ struct pef2256_dev_priv *priv = dev_to_hdlc(netdev)->priv;
+
+ if (!priv->init_done)
+ return 0;
+
+ priv->init_done = 0;
+ netif_stop_queue(netdev);
+ hdlc_close(netdev);
+ free_irq(priv->irq, priv);
+
+ /* Do E1 stuff */
+
+ return 0;
+}
+
+
+
+static int pef2256_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ int ret;
+
+ ret = hdlc_ioctl(dev, ifr, cmd);
+ return ret;
+}
+
+static int pef2256_rx(struct pef2256_dev_priv *priv)
+{
+ struct sk_buff *skb;
+ int idx, size;
+ struct pef2256_regs *base_addr;
+
+ base_addr = priv->base_addr;
+
+ /* RDO has been received -> wait for RME */
+ if (priv->rx_len == -1) {
+ /* Acknowledge the FIFO */
+ setbits8(&(base_addr->CMDR), 1 << 7);
+
+ if (priv->ISR0 & (1 << 7))
+ priv->rx_len = 0;
+
+ return 0;
+ }
+
+ /* RPF : a block is available in the receive FIFO */
+ if (priv->ISR0 & 1) {
+ for (idx = 0; idx < 32; idx++)
+ priv->rx_buff[priv->rx_len + idx] =
+ base_addr->FIFO.RFIFO[idx & 1];
+
+ /* Acknowledge the FIFO */
+ setbits8(&(base_addr->CMDR), 1 << 7);
+
+ priv->rx_len += 32;
+ }
+
+ /* RME : Message end : Read the receive FIFO */
+ if (priv->ISR0 & (1 << 7)) {
+ /* Get size of last block */
+ size = base_addr->RBCL & 0x1F;
+
+ /* Read last block */
+ for (idx = 0; idx < size; idx++)
+ priv->rx_buff[priv->rx_len + idx] =
+ base_addr->FIFO.RFIFO[idx & 1];
+
+ /* Acknowledge the FIFO */
+ setbits8(&(base_addr->CMDR), 1 << 7);
+
+ priv->rx_len += size;
+
+ /* Packet received */
+ if (priv->rx_len > 0) {
+ skb = dev_alloc_skb(priv->rx_len);
+ if (!skb) {
+ priv->rx_len = 0;
+ priv->netdev->stats.rx_dropped++;
+ return -ENOMEM;
+ }
+ memcpy(skb->data, priv->rx_buff, priv->rx_len);
+ skb_put(skb, priv->rx_len);
+ priv->rx_len = 0;
+ skb->protocol = hdlc_type_trans(skb, priv->netdev);
+ priv->netdev->stats.rx_packets++;
+ priv->netdev->stats.rx_bytes += skb->len;
+ netif_rx(skb);
+ }
+ }
+
+ return 0;
+}
+
+
+static int pef2256_tx(struct pef2256_dev_priv *priv)
+{
+ int idx, size;
+ struct pef2256_regs *base_addr;
+ u8 *tx_buff = priv->tx_skb->data;
+
+ base_addr = (struct pef2256_regs *)priv->base_addr;
+
+ /* ALLS : transmit all done */
+ if (priv->ISR1 & (1 << 5)) {
+ priv->netdev->stats.tx_packets++;
+ priv->netdev->stats.tx_bytes += priv->tx_skb->len;
+ /* dev_kfree_skb(priv->tx_skb); */
+ priv->tx_skb = NULL;
+ priv->tx_len = 0;
+ netif_wake_queue(priv->netdev);
+ }
+ /* XPR : write a new block in transmit FIFO */
+ else if (priv->tx_len < priv->tx_skb->len) {
+ size = priv->tx_skb->len - priv->tx_len;
+ if (size > 32)
+ size = 32;
+
+ for (idx = 0; idx < size; idx++)
+ base_addr->FIFO.XFIFO[idx & 1] =
+ tx_buff[priv->tx_len + idx];
+
+ priv->tx_len += size;
+
+ if (priv->tx_len == priv->tx_skb->len)
+ base_addr->CMDR |= ((1 << 3) | (1 << 1));
+ else
+ setbits8(&(base_addr->CMDR), 1 << 3);
+ }
+
+ return 0;
+}
+
+
+irqreturn_t pef2256_irq(int irq, void *dev_priv)
+{
+ struct pef2256_dev_priv *priv = (struct pef2256_dev_priv *)dev_priv;
+ struct pef2256_regs *base_addr;
+ u8 GIS;
+
+ base_addr = (struct pef2256_regs *)priv->base_addr;
+ GIS = base_addr->GIS;
+
+ priv->ISR0 = priv->ISR1 = 0;
+
+ /* We only care about ISR0 and ISR1 */
+ /* ISR0 */
+ if (GIS & 1)
+ priv->ISR0 = base_addr->ISR0 & ~(base_addr->IMR0);
+ /* ISR1 */
+ if (GIS & (1 << 1))
+ priv->ISR1 = base_addr->ISR1 & ~(base_addr->IMR1);
+
+ /* Don't do anything else before init is done */
+ if (!priv->init_done)
+ return IRQ_HANDLED;
+
+ /* RDO : Receive data overflow -> RX error */
+ if (priv->ISR1 & (1 << 6)) {
+ /* Acknowledge the FIFO */
+ setbits8(&(base_addr->CMDR), 1 << 7);
+ priv->netdev->stats.rx_errors++;
+ /* RME received ? */
+ if (priv->ISR0 & (1 << 7))
+ priv->rx_len = 0;
+ else
+ priv->rx_len = -1;
+ return IRQ_HANDLED;
+ }
+
+ /* XDU : Transmit data underrun -> TX error */
+ if (priv->ISR1 & (1 << 4)) {
+ priv->netdev->stats.tx_errors++;
+ /* dev_kfree_skb(priv->tx_skb); */
+ priv->tx_skb = NULL;
+ netif_wake_queue(priv->netdev);
+ return IRQ_HANDLED;
+ }
+
+ /* RPF or RME : FIFO received */
+ if (priv->ISR0 & (1 | (1 << 7)))
+ pef2256_rx(priv);
+
+ /* XPR or ALLS : FIFO sent */
+ if (priv->ISR1 & (1 | (1 << 5)))
+ pef2256_tx(priv);
+
+ return IRQ_HANDLED;
+}
+
+
+static netdev_tx_t pef2256_start_xmit(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ struct pef2256_dev_priv *priv = dev_to_hdlc(netdev)->priv;
+ int idx, size;
+ struct pef2256_regs *base_addr;
+ u8 *tx_buff = skb->data;
+
+ base_addr = (struct pef2256_regs *)priv->base_addr;
+
+ priv->tx_skb = skb;
+ priv->tx_len = 0;
+
+ size = priv->tx_skb->len - priv->tx_len;
+ if (size > 32)
+ size = 32;
+
+ for (idx = 0; idx < size; idx++)
+ base_addr->FIFO.XFIFO[idx & 1] = tx_buff[priv->tx_len + idx];
+
+ priv->tx_len += size;
+
+ setbits8(&(base_addr->CMDR), 1 << 3);
+ if (priv->tx_len == priv->tx_skb->len)
+ setbits8(&(base_addr->CMDR), 1 << 1);
+
+ netif_stop_queue(netdev);
+ return NETDEV_TX_OK;
+}
+
+static const struct net_device_ops pef2256_ops = {
+ .ndo_open = pef2256_open,
+ .ndo_stop = pef2256_close,
+ .ndo_change_mtu = hdlc_change_mtu,
+ .ndo_start_xmit = hdlc_start_xmit,
+ .ndo_do_ioctl = pef2256_ioctl,
+};
+
+
+static int pef2256_hdlc_attach(struct net_device *netdev,
+ unsigned short encoding, unsigned short parity)
+{
+ struct pef2256_dev_priv *priv = dev_to_hdlc(netdev)->priv;
+
+ if (encoding != ENCODING_NRZ &&
+ encoding != ENCODING_NRZI &&
+ encoding != ENCODING_FM_MARK &&
+ encoding != ENCODING_FM_SPACE &&
+ encoding != ENCODING_MANCHESTER)
+ return -EINVAL;
+
+ if (parity != PARITY_NONE &&
+ parity != PARITY_CRC16_PR0_CCITT &&
+ parity != PARITY_CRC16_PR1_CCITT &&
+ parity != PARITY_CRC32_PR0_CCITT &&
+ parity != PARITY_CRC32_PR1_CCITT)
+ return -EINVAL;
+
+ priv->encoding = encoding;
+ priv->parity = parity;
+ return 0;
+}
+
+
+/*
+ * Loading module
+ */
+static const struct of_device_id pef2256_match[];
+static int pef2256_probe(struct platform_device *ofdev)
+{
+ const struct of_device_id *match;
+ struct pef2256_dev_priv *priv;
+ int ret = -ENOMEM;
+ struct net_device *netdev;
+ hdlc_device *hdlc;
+ int sys_ret;
+ struct pef2256_regs *base_addr;
+ struct device_node *np = (&ofdev->dev)->of_node;
+ const u32 *data;
+ int len;
+
+ match = of_match_device(pef2256_match, &ofdev->dev);
+ if (!match)
+ return -EINVAL;
+
+ dev_err(&ofdev->dev, "Found PEF2256\n");
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return ret;
+
+ priv->dev = &ofdev->dev;
+
+ data = of_get_property(np, "data-rate", &len);
+ if (!data || len != 4) {
+ dev_err(&ofdev->dev, "failed to read data-rate -> using 8Mb\n");
+ priv->data_rate = DATA_RATE_8M;
+ } else
+ priv->data_rate = *data;
+
+ data = of_get_property(np, "channel-phase", &len);
+ if (!data || len != 4) {
+ dev_err(&ofdev->dev, "failed to read channel phase -> using 0\n");
+ priv->channel_phase = CHANNEL_PHASE_0;
+ } else
+ priv->channel_phase = *data;
+
+ data = of_get_property(np, "rising-edge-sync-pulse", NULL);
+ if (!data) {
+ dev_err(&ofdev->dev, "failed to read rising edge sync pulse -> using \"transmit\"\n");
+ strcpy(priv->rising_edge_sync_pulse, "transmit");
+ } else if (strcmp((char *)data, "transmit") &&
+ strcmp((char *)data, "receive")) {
+ dev_err(&ofdev->dev, "invalid rising edge sync pulse -> using \"transmit\"\n");
+ strcpy(priv->rising_edge_sync_pulse, "transmit");
+ } else
+ strncpy(priv->rising_edge_sync_pulse, (char *)data, 10);
+
+ priv->irq = of_irq_to_resource(np, 0, NULL);
+ if (!priv->irq) {
+ dev_err(priv->dev, "no irq defined\n");
+ return -EINVAL;
+ }
+
+ priv->base_addr = of_iomap(np, 0);
+ if (!priv->base_addr) {
+ dev_err(&ofdev->dev, "of_iomap failed\n");
+ kfree(priv);
+ return ret;
+ }
+
+ /* Get the component Id */
+ base_addr = (struct pef2256_regs *)priv->base_addr;
+ priv->component_id = VERSION_UNDEF;
+ if (base_addr->VSTR == 0x00) {
+ if ((base_addr->WID & WID_IDENT_1) ==
+ WID_IDENT_1_2)
+ priv->component_id = VERSION_1_2;
+ } else if (base_addr->VSTR == 0x05) {
+ if ((base_addr->WID & WID_IDENT_2) ==
+ WID_IDENT_2_1)
+ priv->component_id = VERSION_2_1;
+ else if ((base_addr->WID & WID_IDENT_2) == WID_IDENT_2_2)
+ priv->component_id = VERSION_2_2;
+ }
+
+ priv->tx_skb = NULL;
+
+ /* Default settings ; Rx and Tx use TS 1, mode = MASTER */
+ priv->Rx_TS = 0x40000000;
+ priv->Tx_TS = 0x40000000;
+ priv->mode = 0;
+
+ netdev = alloc_hdlcdev(priv);
+ if (!netdev) {
+ ret = -ENOMEM;
+ return ret;
+ }
+
+ priv->netdev = netdev;
+ hdlc = dev_to_hdlc(netdev);
+ netdev->netdev_ops = &pef2256_ops;
+ SET_NETDEV_DEV(netdev, &ofdev->dev);
+ hdlc->attach = pef2256_hdlc_attach;
+ hdlc->xmit = pef2256_start_xmit;
+
+ dev_set_drvdata(&ofdev->dev, netdev);
+
+ ret = register_hdlc_device(netdev);
+ if (ret < 0) {
+ pr_err("unable to register\n");
+ return ret;
+ }
+
+ sys_ret = 0;
+ sys_ret |= device_create_file(priv->dev, &dev_attr_mode);
+ sys_ret |= device_create_file(priv->dev, &dev_attr_Tx_TS);
+ sys_ret |= device_create_file(priv->dev, &dev_attr_Rx_TS);
+ sys_ret |= device_create_file(priv->dev, &dev_attr_regs);
+
+ if (sys_ret) {
+ device_remove_file(priv->dev, &dev_attr_mode);
+ unregister_hdlc_device(priv->netdev);
+ free_netdev(priv->netdev);
+ }
+
+ priv->init_done = 0;
+
+ return 0;
+}
+
+
+/*
+ * Suppression du module
+ */
+static int pef2256_remove(struct platform_device *ofdev)
+{
+ struct net_device *ndev = dev_get_drvdata(&ofdev->dev);
+ struct pef2256_dev_priv *priv = dev_to_hdlc(ndev)->priv;
+
+ device_remove_file(priv->dev, &dev_attr_Rx_TS);
+ device_remove_file(priv->dev, &dev_attr_Tx_TS);
+ device_remove_file(priv->dev, &dev_attr_mode);
+
+ unregister_hdlc_device(priv->netdev);
+ free_netdev(priv->netdev);
+
+ /* Do E1 stuff */
+
+ dev_set_drvdata(&ofdev->dev, NULL);
+ kfree(ofdev);
+ return 0;
+}
+
+static const struct of_device_id pef2256_match[] = {
+ {
+ .compatible = "infineon,pef2256",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, pef2256_match);
+
+
+static struct platform_driver pef2256_driver = {
+ .probe = pef2256_probe,
+ .remove = pef2256_remove,
+ .driver = {
+ .name = "pef2256",
+ .owner = THIS_MODULE,
+ .of_match_table = pef2256_match,
+ },
+};
+
+
+static int __init pef2256_init(void)
+{
+ int ret;
+ ret = platform_driver_register(&pef2256_driver);
+ return ret;
+}
+module_init(pef2256_init);
+
+
+static void __exit pef2256_exit(void)
+{
+ platform_driver_unregister(&pef2256_driver);
+}
+module_exit(pef2256_exit);
+
+
+/* GENERAL INFORMATIONS */
+MODULE_AUTHOR("CHANTELAUZE Jerome - April 2013");
+MODULE_VERSION("0.1");
+MODULE_DESCRIPTION("Infineon PEF 2256 E1 Controller");
+MODULE_LICENSE("GPL");
diff -urN a/drivers/net/wan/pef2256.h b/drivers/net/wan/pef2256.h
--- a/drivers/net/wan/pef2256.h 1970-01-01 01:00:00.000000000 +0100
+++ b/drivers/net/wan/pef2256.h 2013-10-13 13:06:00.000000000 +0200
@@ -0,0 +1,269 @@
+/*
+ * drivers/net/wan/pef2256.c : a PEF2256 HDLC driver for Linux
+ *
+ * This software may be used and distributed according to the terms of the
+ * GNU General Public License.
+ *
+ */
+
+#ifndef _PEF2256_H
+#define _PEF2256_H
+
+#define MASTER_MODE 0
+#define SLAVE_MODE 1
+
+#define CHANNEL_PHASE_0 0
+#define CHANNEL_PHASE_1 1
+#define CHANNEL_PHASE_2 2
+#define CHANNEL_PHASE_3 3
+
+#define DATA_RATE_4M 4
+#define DATA_RATE_8M 8
+
+#define RX_TIMEOUT 500
+
+enum versions {
+ VERSION_UNDEF = 0,
+ VERSION_1_2 = 0x12,
+ VERSION_2_1 = 0x21,
+ VERSION_2_2 = 0x22,
+};
+
+#define WID_IDENT_1 0x03
+#define WID_IDENT_1_2 0x03
+#define WID_IDENT_2 0xC0
+#define WID_IDENT_2_1 0x00
+#define WID_IDENT_2_2 0x40
+
+
+struct pef2256_dev_priv {
+ struct sk_buff *tx_skb;
+ u16 tx_len;
+ struct device *dev;
+
+ int init_done;
+
+ void *base_addr;
+ int component_id;
+ int mode; /* MASTER or SLAVE */
+ int board_type;
+ int channel_phase;
+ int data_rate;
+ char rising_edge_sync_pulse[10];
+
+ u16 rx_len;
+ u8 rx_buff[2048];
+
+ u32 Tx_TS; /* Transmit Time Slots */
+ u32 Rx_TS; /* Receive Time Slots */
+
+ unsigned short encoding;
+ unsigned short parity;
+ struct net_device *netdev;
+
+ int irq;
+
+ u8 ISR0; /* ISR0 register */
+ u8 ISR1; /* ISR1 register */
+};
+
+
+/* Framer E1 registers */
+union pef2256_Fifo {
+ u8 XFIFO[sizeof(u16)]; /* Transmit FIFO */
+ u8 RFIFO[sizeof(u16)]; /* Receive FIFO */
+};
+
+union pef2256_60 {
+ unsigned char DEC; /* Disable Error Counter */
+ unsigned char RSA8; /* Receive Sa8-Bit Regiter */
+};
+
+union pef2256_CAS {
+ unsigned char XS; /* Transmit CAS Register */
+ unsigned char RS; /* Receive CAS Regiter */
+};
+
+union pef2256_Dif1 {
+ unsigned char SIS2; /* V1.2 : Signaling Status Register 2 */
+ unsigned char GCM7; /* V2.2 : Global Counter Mode 7 */
+};
+
+union pef2256_Dif2 {
+ unsigned char RSIS2; /* V1.2 : Rx Signaling Status Register 2 */
+ unsigned char GCM8; /* V2.2 : Global Counter Mode 8 */
+};
+
+struct pef2256_regs {
+ union pef2256_Fifo FIFO; /* 0x00/0x01 FIFO (Tx or rx) */
+ unsigned char CMDR; /* 0x02 Command Register */
+ unsigned char MODE; /* 0x03 Mode Register */
+ unsigned char RAH1; /* 0x04 Receive Address High 1 */
+ unsigned char RAH2; /* 0x05 Receive Address High 2 */
+ unsigned char RAL1; /* 0x06 Receive Address Low 1 */
+ unsigned char RAL2; /* 0x07 Receive Address Low 2 */
+ unsigned char IPC; /* 0x08 Interrupt Port Configuration */
+ unsigned char CCR1; /* 0x09 Common Configuration Register 1 */
+ unsigned char CCR2; /* 0x0A Common Configuration Register 2 */
+ unsigned char Res1; /* 0x0B Free Register 1 */
+ unsigned char RTR1; /* 0x0C Receive Time Slot Register 1 */
+ unsigned char RTR2; /* 0x0D Receive Time Slot Register 2 */
+ unsigned char RTR3; /* 0x0E Receive Time Slot Register 3 */
+ unsigned char RTR4; /* 0x0F Receive Time Slot Register 4 */
+ unsigned char TTR1; /* 0x10 Transmit Time Slot Register 1 */
+ unsigned char TTR2; /* 0x11 Transmit Time Slot Register 2 */
+ unsigned char TTR3; /* 0x12 Transmit Time Slot Register 3 */
+ unsigned char TTR4; /* 0x13 Transmit Time Slot Register 4 */
+ unsigned char IMR0; /* 0x14 Interrupt Mask Register 0 */
+ unsigned char IMR1; /* 0x15 Interrupt Mask Register 1 */
+ unsigned char IMR2; /* 0x16 Interrupt Mask Register 2 */
+ unsigned char IMR3; /* 0x17 Interrupt Mask Register 3 */
+ unsigned char IMR4; /* 0x18 Interrupt Mask Register 4 */
+ unsigned char IMR5; /* 0x19 Interrupt Mask Register 5 */
+ unsigned char Res2; /* 0x1A Free Register 2 */
+ unsigned char IERR; /* 0x1B Single Bit Error Insertion Register */
+ unsigned char FMR0; /* 0x1C Framer Mode Register 0 */
+ unsigned char FMR1; /* 0x1D Framer Mode Register 1 */
+ unsigned char FMR2; /* 0x1E Framer Mode Register 2 */
+ unsigned char LOOP; /* 0x1F Channel Loop-Back */
+ unsigned char XSW; /* 0x20 Transmit Service Word */
+ unsigned char XSP; /* 0x21 Transmit Spare Bits */
+ unsigned char XC0; /* 0x22 Transmit Control 0 */
+ unsigned char XC1; /* 0x23 Transmit Control 1 */
+ unsigned char RC0; /* 0x24 Receive Control 0 */
+ unsigned char RC1; /* 0x25 Receive Control 1 */
+ unsigned char XPM0; /* 0x26 Transmit Pulse Mask 0 */
+ unsigned char XPM1; /* 0x27 Transmit Pulse Mask 1 */
+ unsigned char XPM2; /* 0x28 Transmit Pulse Mask 2 */
+ unsigned char TSWM; /* 0x29 Transparent Service Word Mask */
+ unsigned char Res3; /* 0x2A Free Register 3 */
+ unsigned char IDLE; /* 0x2B Idle Channel Code */
+ unsigned char XSA4; /* 0x2C Transmit Sa4-Bit Register */
+ unsigned char XSA5; /* 0x2D Transmit Sa5-Bit Register */
+ unsigned char XSA6; /* 0x2E Transmit Sa6-Bit Register */
+ unsigned char XSA7; /* 0x2F Transmit Sa7-Bit Register */
+ unsigned char XSA8; /* 0x30 Transmit Sa8-Bit Register */
+ unsigned char FMR3; /* 0x31 Framer Mode Register 3 */
+ unsigned char ICB1; /* 0x32 Idle Channel Register 1 */
+ unsigned char ICB2; /* 0x33 Idle Channel Register 2 */
+ unsigned char ICB3; /* 0x34 Idle Channel Register 3 */
+ unsigned char ICB4; /* 0x35 Idle Channel Register 4 */
+ unsigned char LIM0; /* 0x36 Line Interface Mode 0 */
+ unsigned char LIM1; /* 0x37 Line Interface Mode 1 */
+ unsigned char PCD; /* 0x38 Pulse Count Detection */
+ unsigned char PCR; /* 0x39 Pulse Count Recovery */
+ unsigned char LIM2; /* 0x3A Line Interface Mode 2 */
+ unsigned char LCR1; /* 0x3B Loop Code Register 1 */
+ unsigned char LCR2; /* 0x3C Loop Code Register 2 */
+ unsigned char LCR3; /* 0x3D Loop Code Register 3 */
+ unsigned char SIC1; /* 0x3E System Interface Control 1 */
+ unsigned char SIC2; /* 0x3F System Interface Control 2 */
+ unsigned char SIC3; /* 0x40 System Interface Control 3 */
+ unsigned char Res4; /* 0x41 Free Register 4 */
+ unsigned char Res5; /* 0x42 Free Register 5 */
+ unsigned char Res6; /* 0x43 Free Register 6 */
+ unsigned char CMR1; /* 0x44 Clock Mode Register 1 */
+ unsigned char CMR2; /* 0x45 Clock Mode Register 2 */
+ unsigned char GCR; /* 0x46 Global Configuration Register */
+ unsigned char ESM; /* 0x47 Errored Second Mask */
+ unsigned char CMR3; /* 0x48 Clock Mode Register 3 en V2.2 */
+ unsigned char RBD; /* 0x49 Receive Buffer Delay */
+ unsigned char VSTR; /* 0x4A Version Status Regiter */
+ unsigned char RES; /* 0x4B Receive Equalizer Status */
+ unsigned char FRS0; /* 0x4C Framer Receive Status 0 */
+ unsigned char FRS1; /* 0x4D Framer Receive Status 1 */
+ unsigned char RSW; /* 0x4E Receive Service Word */
+ unsigned char RSP; /* 0x4F Receive Spare Bits */
+ unsigned short FEC; /* 0x50/0x51 Framing Error Counter */
+ unsigned short CVC; /* 0x52/0x53 Code Violation Counter */
+ unsigned short CEC1; /* 0x54/0x55 CRC Error Counter 1 */
+ unsigned short EBC; /* 0x56/0x57 E-Bit Error Counter */
+ unsigned short CEC2; /* 0x58/0x59 CRC Error Counter 2 */
+ unsigned short CEC3; /* 0x5A/0x5B CRC Error Counter 3 */
+ unsigned char RSA4; /* 0x5C Receive Sa4-Bit Register */
+ unsigned char RSA5; /* 0x5D Receive Sa5-Bit Register */
+ unsigned char RSA6; /* 0x5E Receive Sa6-Bit Register */
+ unsigned char RSA7; /* 0x5F Receive Sa7-Bit Register */
+ union pef2256_60 Reg60; /* 0x60 Common Register */
+ unsigned char RSA6S; /* 0x61 Receive Sa6-Bit Status Register */
+ unsigned char RSP1; /* 0x62 Receive Signaling Pointer 1 */
+ unsigned char RSP2; /* 0x63 Receive Signaling Pointer 2 */
+ unsigned char SIS; /* 0x64 Signaling Status Register */
+ unsigned char RSIS; /* 0x65 Receive Signaling Status Register */
+ unsigned char RBCL; /* 0x66 Receive Byte Control */
+ unsigned char RBCH; /* 0x67 Receive Byte Control */
+ unsigned char ISR0; /* 0x68 Interrupt Status Register 0 */
+ unsigned char ISR1; /* 0x69 Interrupt Status Register 1 */
+ unsigned char ISR2; /* 0x6A Interrupt Status Register 2 */
+ unsigned char ISR3; /* 0x6B Interrupt Status Register 3 */
+ unsigned char ISR4; /* 0x6C Interrupt Status Register 4 */
+ unsigned char ISR5; /* 0x6D Interrupt Status Register 5 */
+ unsigned char GIS; /* 0x6E Global Interrupt Status */
+ unsigned char Res8; /* 0x6F Free Register 8 */
+ union pef2256_CAS CAS1; /* 0x70 CAS Register 1 */
+ union pef2256_CAS CAS2; /* 0x71 CAS Register 2 */
+ union pef2256_CAS CAS3; /* 0x72 CAS Register 3 */
+ union pef2256_CAS CAS4; /* 0x73 CAS Register 4 */
+ union pef2256_CAS CAS5; /* 0x74 CAS Register 5 */
+ union pef2256_CAS CAS6; /* 0x75 CAS Register 6 */
+ union pef2256_CAS CAS7; /* 0x76 CAS Register 7 */
+ union pef2256_CAS CAS8; /* 0x77 CAS Register 8 */
+ union pef2256_CAS CAS9; /* 0x78 CAS Register 9 */
+ union pef2256_CAS CAS10; /* 0x79 CAS Register 10 */
+ union pef2256_CAS CAS11; /* 0x7A CAS Register 11 */
+ union pef2256_CAS CAS12; /* 0x7B CAS Register 12 */
+ union pef2256_CAS CAS13; /* 0x7C CAS Register 13 */
+ union pef2256_CAS CAS14; /* 0x7D CAS Register 14 */
+ union pef2256_CAS CAS15; /* 0x7E CAS Register 15 */
+ union pef2256_CAS CAS16; /* 0x7F CAS Register 16 */
+ unsigned char PC1; /* 0x80 Port Configuration 1 */
+ unsigned char PC2; /* 0x81 Port Configuration 2 */
+ unsigned char PC3; /* 0x82 Port Configuration 3 */
+ unsigned char PC4; /* 0x83 Port Configuration 4 */
+ unsigned char PC5; /* 0x84 Port Configuration 5 */
+ unsigned char GPC1; /* 0x85 Global Port Configuration 1 */
+ unsigned char PC6; /* 0x86 Port Configuration 6 */
+ unsigned char CMDR2; /* 0x87 Command Register 2 */
+ unsigned char CMDR3; /* 0x88 Command Register 3 */
+ unsigned char CMDR4; /* 0x89 Command Register 4 */
+ unsigned char Res9; /* 0x8A Free Register 9 */
+ unsigned char CCR3; /* 0x8B Common Control Register 3 */
+ unsigned char CCR4; /* 0x8C Common Control Register 4 */
+ unsigned char CCR5; /* 0x8D Common Control Register 5 */
+ unsigned char MODE2; /* 0x8E Mode Register 2 */
+ unsigned char MODE3; /* 0x8F Mode Register 3 */
+ unsigned char RBC2; /* 0x90 Receive Byte Count Register 2 */
+ unsigned char RBC3; /* 0x91 Receive Byte Count Register 3 */
+ unsigned char GCM1; /* 0x92 Global Counter Mode 1 */
+ unsigned char GCM2; /* 0x93 Global Counter Mode 2 */
+ unsigned char GCM3; /* 0x94 Global Counter Mode 3 */
+ unsigned char GCM4; /* 0x95 Global Counter Mode 4 */
+ unsigned char GCM5; /* 0x96 Global Counter Mode 5 */
+ unsigned char GCM6; /* 0x97 Global Counter Mode 6 */
+ union pef2256_Dif1 Dif1; /* 0x98 SIS2 en V1.2, GCM7 en V2.2 */
+ union pef2256_Dif2 Dif2; /* 0x99 RSIS2 en V1.2, GCM8 en V2.2 */
+ unsigned char SIS3; /* 0x9A Signaling Status Register 3 */
+ unsigned char RSIS3; /* 0x9B Receive Signaling Status Register 3 */
+ union pef2256_Fifo FIFO2; /* 0x9C/0x9D FIFO 2 (Tx or rx) */
+ union pef2256_Fifo FIFO3; /* 0x9E/0x9F FIFO 3 (Tx or rx) */
+ unsigned char TSEO; /* 0xA0 Time Slot Even/Odd select */
+ unsigned char TSBS1; /* 0xA1 Time Slot Bit select 1 */
+ unsigned char TSBS2; /* 0xA2 Time Slot Bit select 2 */
+ unsigned char TSBS3; /* 0xA3 Time Slot Bit select 3 */
+ unsigned char TSS2; /* 0xA4 Time Slot select 2 */
+ unsigned char TSS3; /* 0xA5 Time Slot select 3 */
+ unsigned char Res10; /* 0xA6 Free Register 10 */
+ unsigned char Res11; /* 0xA7 Free Register 11 */
+ unsigned char TPC0; /* 0xA8 Test Pattern Control Register 0 */
+ unsigned char SIS2; /* 0xA9 Signaling Status Register 2 (V2.2) */
+ unsigned char RSIS2; /* 0xAA Rx Signaling Status Register 2 (V2.2) */
+ unsigned char MFPI; /* 0xAB Multi Function Port Input Status */
+ unsigned char Res12; /* 0xAC Free Register 12 */
+ unsigned char Res13; /* 0xAD Free Register 13 */
+ unsigned char Res14; /* 0xAE Free Register 14 */
+ unsigned char GLC1; /* 0xAF Global Line Control Register 1 */
+ unsigned char Res[0xEB-0xAF]; /* 0xB0/0xEB Free Registers */
+ unsigned char WID; /* 0xEC Identification Register */
+};
+
+#endif /* _PEF2256_H */
diff -urN a/Documentation/devicetree/bindings/net/pef2256.txt b/Documentation/devicetree/bindings/net/pef2256.txt
--- a/Documentation/devicetree/bindings/net/pef2256.txt 1970-01-01 01:00:00.000000000 +0100
+++ b/Documentation/devicetree/bindings/net/pef2256.txt 2013-10-13 15:05:42.000000000 +0200
@@ -0,0 +1,29 @@
+* Wan on Infineon pef2256 E1 controller
+
+Required properties:
+- compatible: Should be "infineon,pef2256"
+- reg: Address and length of the register set for the device
+- interrupts: Should contain interrupts
+
+Optional properties:
+- data-rate: Data rate on the system highway.
+ Supported values are: 2, 4, 8, 16.
+ 8 if not defined.
+- channel-phase: First time slot transmission channel phase.
+ Supported values are: 0, 1, 2, 3, 4, 5, 6, 7.
+ 0 if not defined.
+- rising-edge-sync-pulse: rising edge synchronous pulse.
+ Supported values are: "receive", "transmit".
+ "transmit" if not defined.
+
+Examples:
+
+ e1-wan@4,2000000 {
+ compatible = "infineon,pef2256";
+ reg = <4 0x2000000 0xFF>;
+ interrupts = <8 1>;
+ interrupt-parent = <&PIC>;
+ data-rate = <4>;
+ channel-phase = <1>;
+ rising-edge-sync-pulse = "transmit";
+ };
diff -urN a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
--- a/drivers/net/wan/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ b/drivers/net/wan/Makefile 2013-10-13 13:05:01.000000000 +0200
@@ -22,6 +22,7 @@
obj-$(CONFIG_COSA) += cosa.o
obj-$(CONFIG_FARSYNC) += farsync.o
obj-$(CONFIG_DSCC4) += dscc4.o
+obj-$(CONFIG_PEF2256) += pef2256.o
obj-$(CONFIG_X25_ASY) += x25_asy.o
obj-$(CONFIG_LANMEDIA) += lmc/
diff -urN a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
--- a/drivers/net/wan/Kconfig 1970-01-01 01:00:00.000000000 +0100
+++ b/drivers/net/wan/Kconfig 2013-10-13 13:05:01.000000000 +0200
@@ -266,6 +266,16 @@
To compile this driver as a module, choose M here: the
module will be called farsync.
+config PEF2256
+ tristate "PEF2256 support"
+ depends on HDLC && OF && SYSFS
+ help
+ Driver for Infineon FALC56 E1/T1/J1 Framer and Line Interface
+ based on PEF2256 chipset.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pef2256.
+
config DSCC4
tristate "Etinc PCISYNC serial board support"
depends on HDLC && PCI && m
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/