Re: [PATCH 1/2] i2c-designware-pci: Add Haswell ULT device IDs

[Mika Westerberg]

On Sun, Oct 20, 2013 at 08:26:49PM -0700, Benson Leung wrote:
> From: Duncan Laurie <dlaurie@xxxxxxxxxxxx>
> 
> Add the necessary PCI Device IDs to use the Haswell ULT
> I2C controller in PCI mode.
> 
> Set the bus numbers to -1 so it will use dynamic assignment
> rather than hardcoded.
> 
> Signed-off-by: Duncan Laurie <dlaurie@xxxxxxxxxxxx>
> Signed-off-by: Benson Leung <bleung@xxxxxxxxxxxx>

Looks good to me, except one thing...

> ---
>  drivers/i2c/busses/i2c-designware-pcidrv.c | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
> index f6ed06c..e4cbbdf 100644
> --- a/drivers/i2c/busses/i2c-designware-pcidrv.c
> +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
> @@ -54,6 +54,9 @@ enum dw_pci_ctl_id_t {
>  	medfield_3,
>  	medfield_4,
>  	medfield_5,
> +
> +	haswell_0,
> +	haswell_1,
>  };
>  
>  struct dw_pci_controller {
> @@ -132,6 +135,20 @@ static struct  dw_pci_controller  dw_pci_controllers[] = {
>  		.rx_fifo_depth = 32,
>  		.clk_khz      = 25000,
>  	},
> +	[haswell_0] = {
> +		.bus_num     = -1,
> +		.bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_STD,
> +		.tx_fifo_depth = 32,
> +		.rx_fifo_depth = 32,
> +		.clk_khz      = 25000,

The input clock for I2C in Haswell is 100MHz, not 25MHz.

> +	},
> +	[haswell_1] = {
> +		.bus_num     = -1,
> +		.bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_STD,
> +		.tx_fifo_depth = 32,
> +		.rx_fifo_depth = 32,
> +		.clk_khz      = 25000,

Ditto.

> +	},
>  };
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/