Re: [PATCH] mfd: ti_am335x_tscadc: fix spin lock and reg_cache

[Sebastian Andrzej Siewior]

On 10/22/2013 06:05 PM, Lee Jones wrote:
>> I added reg_se_cache to cache the content of REG_SE once and
>> synchronize it among TSC & ADC access. REG_SE is set to 0 by the HW
>> after "work" has been done. So you need to know the old value or TSC may
>> disable ADC and the other way around.
> 
> Yep, it's initialised as '0'.
> 
> 12.5.1.15 STEPENABLE Register (offset = 54h) [reset = 0h]

Ehm yes but!. After init it is set to 0, correct. The value was never
read from the HW. It was always set via  am335x_tsc_se_set() to "cache
| argument" and written to HW from both sides (TSC, ADC). This
initialization is done at ->probe() time in both drivers.

The value remains (remained) constant over the whole time
so both drivers only called am335x_tsc_se_update() to set the value
(the enabled steps of both sides) back to the register (because after
the conversation the value was 0 according to my memory) and since
32bit reads are atomic I didn't use a lock here.

Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/