Re: ARM/kirkwood: v3.12-rc6: kernel BUG at mm/util.c:390!

[Will Deacon]

On Thu, Oct 24, 2013 at 09:07:30PM +0100, Aaro Koskinen wrote:
> Hi,

Hello,

[adding Catalin and Simon]

> I was trying to debug kernel crashes on Marvell Kirkwood (openrd)
> when upgrading from GCC 4.7.3 -> GCC 4.8.2. So I enabled most of the
> kernel debug options. However, I noticed that already when compiled with
> GCC 4.7.3 kernel crashes consistently at boot when DEBUG_VM is enabled
> (without it there are no issues with 4.7.3). See below for the boot/crash
> log & kernel config.

Ok, but this doesn't seem to be related to GCC.

[...]

> [   26.694345] ata2: link is slow to respond, please be patient (ready=0)
> [   31.194346] ata2: SRST failed (errno=-16)
> [   31.754426] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
> [   31.834619] ata2.00: ATA-6: eSATA-2 WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
> [   31.899627] ata2.00: 976773168 sectors, multi 0: LBA48
> [   31.994458] ata2.00: configured for UDMA/133
> [   32.075306] ------------[ cut here ]------------
> [   32.136256] kernel BUG at mm/util.c:390!
> [   32.195446] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM
> [   32.255893] Modules linked in:
> [   32.313109] CPU: 0 PID: 12 Comm: kworker/u2:1 Not tainted 3.12.0-rc6-openrd-los.git-1836ad9-dirty #3
> [   32.435821] Workqueue: events_unbound async_run_entry_fn
> [   32.498701] task: df854700 ti: df8a8000 task.ti: df8a8000
> [   32.561662] PC is at page_mapping+0x48/0x50
> [   32.622764] LR is at flush_kernel_dcache_page+0x14/0x98
> [   32.685421] pc : [<c00923c4>]    lr : [<c0010dd8>]    psr: 20000093
> [   32.685421] sp : df8a99f8  ip : df8a9a08  fp : df8a9a04
> [   32.812754] r10: 60000093  r9 : df8a9c24  r8 : 00000024
> [   32.874269] r7 : 00000000  r6 : c0a3cd0c  r5 : 00001000  r4 : c0e2732c
> [   32.936395] r3 : 00000000  r2 : 00000080  r1 : 00000564  r0 : c0e2732c
> [   32.996978] Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
> [   33.059012] Control: 0005317f  Table: 1a8dc000  DAC: 00000017
> [   33.119473] Process kworker/u2:1 (pid: 12, stack limit = 0xdf8a81c0)

The BUG is because page_mapping is being given a slab page...

> [   36.477203] Backtrace:
> [   36.535603] [<c009237c>] (page_mapping+0x0/0x50) from [<c0010dd8>] (flush_kernel_dcache_page+0x14/0x98)
> [   36.661070] [<c0010dc4>] (flush_kernel_dcache_page+0x0/0x98) from [<c0172b60>] (sg_miter_stop+0xc8/0x10c)
> [   36.792813]  r4:df8a9a64 r3:00000003
> [   36.857524] [<c0172a98>] (sg_miter_stop+0x0/0x10c) from [<c0172f20>] (sg_miter_next+0x14/0x13c)

... assumedly for scatter/gather DMA. How is your block driver allocating
its buffers? If you're using the DMA API, I can't see how this would happen.

Will
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/