[PATCH 15/16] wl1251: Add sysfs file tx_mgmt_frm_rate for setting rate

[Pali RohÃr]

This patch was extracted from Maemo 2.6.28 kernel

Signed-off-by: Pali RohÃr <pali.rohar@xxxxxxxxx>
---
 drivers/net/wireless/ti/wl1251/main.c |  152 +++++++++++++++++++++++++++++++++
 1 file changed, 152 insertions(+)

diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c
index 7b9efc8..29625c2 100644
--- a/drivers/net/wireless/ti/wl1251/main.c
+++ b/drivers/net/wireless/ti/wl1251/main.c
@@ -1375,6 +1375,147 @@ static const struct ieee80211_ops wl1251_ops = {
 	.get_survey = wl1251_op_get_survey,
 };
 
+static ssize_t wl1251_sysfs_show_tx_mgmt_frm_rate(struct device *dev,
+						  struct device_attribute *attr,
+						  char *buf)
+{
+	struct wl1251 *wl = dev_get_drvdata(dev);
+	ssize_t len;
+	int val;
+
+	/* FIXME: what's the maximum length of buf? page size?*/
+	len = 500;
+
+	switch (wl->tx_mgmt_frm_rate) {
+		/* skip 1 and 12 Mbps because they have same value 0x0a */
+	case RATE_2MBPS:
+		val = 20;
+		break;
+	case RATE_5_5MBPS:
+		val = 55;
+		break;
+	case RATE_11MBPS:
+		val = 110;
+		break;
+	case RATE_6MBPS:
+		val = 60;
+		break;
+	case RATE_9MBPS:
+		val = 90;
+		break;
+	case RATE_12MBPS:
+		val = 120;
+		break;
+	case RATE_18MBPS:
+		val = 180;
+		break;
+	case RATE_24MBPS:
+		val = 240;
+		break;
+	case RATE_36MBPS:
+		val = 360;
+		break;
+	case RATE_48MBPS:
+		val = 480;
+		break;
+	case RATE_54MBPS:
+		val = 540;
+		break;
+	default:
+		val = 10;
+	}
+
+	/* for 1 and 12 Mbps we have to check the modulation */
+	if (wl->tx_mgmt_frm_rate == RATE_1MBPS) {
+		switch (wl->tx_mgmt_frm_rate) {
+		case CCK_LONG:
+			val = 10;
+			break;
+		case OFDM:
+			val = 120;
+			break;
+		default:
+			val = 10;
+			break;
+		}
+	}
+	len = snprintf(buf, len, "%d", val);
+
+	return len;
+}
+
+static ssize_t wl1251_sysfs_store_tx_mgmt_frm_rate(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct wl1251 *wl = dev_get_drvdata(dev);
+	unsigned long res;
+	int ret;
+
+	ret = strict_strtoul(buf, 10, &res);
+
+	if (ret < 0) {
+		wl1251_warning("incorrect value written to tx_mgmt_frm_rate");
+		return 0;
+	}
+
+	switch (res) {
+	case 10:
+		wl->tx_mgmt_frm_rate = RATE_1MBPS;
+		wl->tx_mgmt_frm_mod = CCK_LONG;
+		break;
+	case 20:
+		wl->tx_mgmt_frm_rate = RATE_2MBPS;
+		wl->tx_mgmt_frm_mod = CCK_LONG;
+		break;
+	case 55:
+		wl->tx_mgmt_frm_rate = RATE_5_5MBPS;
+		wl->tx_mgmt_frm_mod = CCK_LONG;
+		break;
+	case 110:
+		wl->tx_mgmt_frm_rate = RATE_11MBPS;
+		wl->tx_mgmt_frm_mod = CCK_LONG;
+		break;
+	case 60:
+		wl->tx_mgmt_frm_rate = RATE_6MBPS;
+		wl->tx_mgmt_frm_mod = OFDM;
+		break;
+	case 90:
+		wl->tx_mgmt_frm_rate = RATE_9MBPS;
+		wl->tx_mgmt_frm_mod = OFDM;
+		break;
+	case 120:
+		wl->tx_mgmt_frm_rate = RATE_12MBPS;
+		wl->tx_mgmt_frm_mod = OFDM;
+		break;
+	case 180:
+		wl->tx_mgmt_frm_rate = RATE_18MBPS;
+		wl->tx_mgmt_frm_mod = OFDM;
+		break;
+	case 240:
+		wl->tx_mgmt_frm_rate = RATE_24MBPS;
+		wl->tx_mgmt_frm_mod = OFDM;
+		break;
+	case 360:
+		wl->tx_mgmt_frm_rate = RATE_36MBPS;
+		wl->tx_mgmt_frm_mod = OFDM;
+		break;
+	case 480:
+		wl->tx_mgmt_frm_rate = RATE_48MBPS;
+		wl->tx_mgmt_frm_mod = OFDM;
+		break;
+	case 540:
+		wl->tx_mgmt_frm_rate = RATE_54MBPS;
+		wl->tx_mgmt_frm_mod = OFDM;
+		break;
+	default:
+		wl1251_warning("incorrect value written to tx_mgmt_frm_rate");
+		return 0;
+	}
+
+	return count;
+}
+
 static ssize_t wl1251_sysfs_show_bt_coex_mode(struct device *dev,
 					      struct device_attribute *attr,
 					      char *buf)
@@ -1443,6 +1584,10 @@ out:
 	return count;
 }
 
+static DEVICE_ATTR(tx_mgmt_frm_rate, S_IRUGO | S_IWUSR,
+		   wl1251_sysfs_show_tx_mgmt_frm_rate,
+		   wl1251_sysfs_store_tx_mgmt_frm_rate);
+
 static DEVICE_ATTR(bt_coex_mode, S_IRUGO | S_IWUSR,
 		   wl1251_sysfs_show_bt_coex_mode,
 		   wl1251_sysfs_store_bt_coex_mode);
@@ -1583,6 +1728,13 @@ int wl1251_init_ieee80211(struct wl1251 *wl)
 	}
 	dev_set_drvdata(&wl1251_device.dev, wl);
 
+	/* Create sysfs file tx_mgmt_frm_rate */
+	ret = device_create_file(&wl1251_device.dev,
+				 &dev_attr_tx_mgmt_frm_rate);
+	if (ret < 0) {
+		wl1251_error("failed to create sysfs file tx_mgmt_frm_rate");
+		goto out;
+	}
 
 	/* Create sysfs file to control bt coex state */
 	ret = device_create_file(&wl1251_device.dev, &dev_attr_bt_coex_mode);
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/