Re: [PATCHv2 1/3] Input: twl4030-keypad - add device tree support

[Pavel Machek]

Hi!

> Add device tree support for twl4030 keypad driver and update the
> Documentation with twl4030 keypad device tree binding information.
> 
> Tested on Nokia N900.

It looks pretty good.

> +++ b/Documentation/devicetree/bindings/input/twl4030-keypad.txt
> @@ -0,0 +1,31 @@
> +* TWL4030's Keypad Controller device tree bindings
> +
> +TWL4030's Keypad controller is used to interface a SoC with a matrix-type
> +keypad device. The keypad controller supports multiple row and column lines.
> +A key can be placed at each intersection of a unique row and a unique column.
> +The keypad controller can sense a key-press and key-release and report the
> +event using a interrupt to the cpu.
> +
> +This binding is based on the matrix-keymap binding with the following
> +changes:
> +
> + * keypad,num-rows and keypad,num-columns are required.

Is "keypad," prefix neccessary here?

> +Optional Properties specific to linux:
> +- linux,keypad-no-autorepeat: do no enable autorepeat feature.

"do not autorepeat". Plus I do not see what is Linux specifc about not
autorepeating... Other systems will likely know about autorepeat, too.

> @@ -324,6 +326,31 @@ static int twl4030_kp_program(struct twl4030_keypad *kp)
>  	return 0;
>  }
>  
> +#if IS_ENABLED(CONFIG_OF)

I'm probably missing something here, but why not #ifdef CONFIG_OF?

> @@ -381,7 +426,7 @@ static int twl4030_kp_probe(struct platform_device *pdev)
>  
>  	input_set_capability(input, EV_MSC, MSC_SCAN);
>  	/* Enable auto repeat feature of Linux input subsystem */
> -	if (pdata->rep)
> +	if (!kp->no_autorepeat)
>  		__set_bit(EV_REP, input->evbit);
>

Double negation is nasty to read. I believe code would be more
readable if you switched logic to kp->autorepeat.

Thanks,
									Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/