Re: [PATCH V5 REPOST] mfd: add support for ams AS3722 PMIC

[Grant Likely]

On Sat, 26 Oct 2013 09:19:02 -0700, Lee Jones <lee.jones@xxxxxxxxxx> wrote:
> Hi Grant,
> 
> > > Acked-by: Stephen Warren <swarren@xxxxxxxxxx>
> > > Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
> > > Signed-off-by: Florian Lobmaier <florian.lobmaier@xxxxxxx>
> > > Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
> 
> <snip>
> 
> > > +    Optional properties:
> > > +    -------------------
> > > +	The input supply of regulators are the optional properties on the
> > > +	regulator node. The input supply of these regulators are provided
> > > +	through following properties:
> > > +		vsup-sd2-supply: Input supply for SD2.
> > > +		vsup-sd3-supply: Input supply for SD3.
> > > +		vsup-sd4-supply: Input supply for SD4.
> > > +		vsup-sd5-supply: Input supply for SD5.
> > > +		vin-ldo0-supply: Input supply for LDO0.
> > > +		vin-ldo1-6-supply: Input supply for LDO1 and LDO6.
> > > +		vin-ldo2-5-7-supply: Input supply for LDO2, LDO5 and LDO7.
> > > +		vin-ldo3-4-supply: Input supply for LDO3 and LDO4.
> > > +		vin-ldo9-10-supply: Input supply for LDO9 and LDO10.
> > > +		vin-ldo11-supply: Input supply for LDO11.
> > 
> > What is the data in these properties? The documentation isn't clear.
> > 
> > In principle, the binding looks okay to me.
> 
> The properties to which you refer are standard regulator supply
> bindings specified here [1]. Specifically:
> 
>   "<name>-supply: phandle to the parent supply/regulator node"
> 
> The DT portion has already been Acked by Stephen and applied by me.
> 
> [1] Documentation/devicetree/bindings/regulator/regulator.txt

Okay, thanks. I was being too lazy to go digging.  :-)

g.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/