[PATCH 2/2] dma: mv_xor: Use high_base mmio where appropriate

[Ezequiel Garcia]

Despite requesting two memory resources, called 'base' and 'high_base', the
driver uses explicitly only the former. The latter is being used implicitly
by addressing at offset +0x200, which in practice accesses high_base.

Instead of relying in such trick, let's define the registers with the
offset from high_base, and use high_base explicitly where appropriate.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
---
 drivers/dma/mv_xor.c |  3 ++-
 drivers/dma/mv_xor.h | 25 +++++++++++++------------
 2 files changed, 15 insertions(+), 13 deletions(-)

diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index d00d58e..c7da545 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -1076,6 +1076,7 @@ mv_xor_channel_add(struct mv_xor_device *xordev,
 	}
 
 	mv_chan->mmr_base = xordev->xor_base;
+	mv_chan->mmr_high_base = xordev->xor_high_base;
 	tasklet_init(&mv_chan->irq_tasklet, mv_xor_tasklet, (unsigned long)
 		     mv_chan);
 
@@ -1134,7 +1135,7 @@ static void
 mv_xor_conf_mbus_windows(struct mv_xor_device *xordev,
 			 const struct mbus_dram_target_info *dram)
 {
-	void __iomem *base = xordev->xor_base;
+	void __iomem *base = xordev->xor_high_base;
 	u32 win_enable = 0;
 	int i;
 
diff --git a/drivers/dma/mv_xor.h b/drivers/dma/mv_xor.h
index 06b067f..d074922 100644
--- a/drivers/dma/mv_xor.h
+++ b/drivers/dma/mv_xor.h
@@ -34,13 +34,13 @@
 #define XOR_OPERATION_MODE_MEMCPY	2
 #define XOR_DESCRIPTOR_SWAP		BIT(14)
 
-#define XOR_CURR_DESC(chan)	(chan->mmr_base + 0x210 + (chan->idx * 4))
-#define XOR_NEXT_DESC(chan)	(chan->mmr_base + 0x200 + (chan->idx * 4))
-#define XOR_BYTE_COUNT(chan)	(chan->mmr_base + 0x220 + (chan->idx * 4))
-#define XOR_DEST_POINTER(chan)	(chan->mmr_base + 0x2B0 + (chan->idx * 4))
-#define XOR_BLOCK_SIZE(chan)	(chan->mmr_base + 0x2C0 + (chan->idx * 4))
-#define XOR_INIT_VALUE_LOW(chan)	(chan->mmr_base + 0x2E0)
-#define XOR_INIT_VALUE_HIGH(chan)	(chan->mmr_base + 0x2E4)
+#define XOR_CURR_DESC(chan)	(chan->mmr_high_base + 0x10 + (chan->idx * 4))
+#define XOR_NEXT_DESC(chan)	(chan->mmr_high_base + 0x00 + (chan->idx * 4))
+#define XOR_BYTE_COUNT(chan)	(chan->mmr_high_base + 0x20 + (chan->idx * 4))
+#define XOR_DEST_POINTER(chan)	(chan->mmr_high_base + 0xB0 + (chan->idx * 4))
+#define XOR_BLOCK_SIZE(chan)	(chan->mmr_high_base + 0xC0 + (chan->idx * 4))
+#define XOR_INIT_VALUE_LOW(chan)	(chan->mmr_high_base + 0xE0)
+#define XOR_INIT_VALUE_HIGH(chan)	(chan->mmr_high_base + 0xE4)
 
 #define XOR_CONFIG(chan)	(chan->mmr_base + 0x10 + (chan->idx * 4))
 #define XOR_ACTIVATION(chan)	(chan->mmr_base + 0x20 + (chan->idx * 4))
@@ -50,11 +50,11 @@
 #define XOR_ERROR_ADDR(chan)	(chan->mmr_base + 0x60)
 #define XOR_INTR_MASK_VALUE	0x3F5
 
-#define WINDOW_BASE(w)		(0x250 + ((w) << 2))
-#define WINDOW_SIZE(w)		(0x270 + ((w) << 2))
-#define WINDOW_REMAP_HIGH(w)	(0x290 + ((w) << 2))
-#define WINDOW_BAR_ENABLE(chan)	(0x240 + ((chan) << 2))
-#define WINDOW_OVERRIDE_CTRL(chan)	(0x2A0 + ((chan) << 2))
+#define WINDOW_BASE(w)		(0x50 + ((w) << 2))
+#define WINDOW_SIZE(w)		(0x70 + ((w) << 2))
+#define WINDOW_REMAP_HIGH(w)	(0x90 + ((w) << 2))
+#define WINDOW_BAR_ENABLE(chan)	(0x40 + ((chan) << 2))
+#define WINDOW_OVERRIDE_CTRL(chan)	(0xA0 + ((chan) << 2))
 
 struct mv_xor_device {
 	void __iomem	     *xor_base;
@@ -82,6 +82,7 @@ struct mv_xor_chan {
 	int			pending;
 	spinlock_t		lock; /* protects the descriptor slot pool */
 	void __iomem		*mmr_base;
+	void __iomem		*mmr_high_base;
 	unsigned int		idx;
 	int                     irq;
 	enum dma_transaction_type	current_type;
-- 
1.8.1.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/