RE: [PATCH 3/4] VFIO: pci: amend vfio-pci for explicit binding viasysfs only

[Bhushan Bharat-R65777]

> -----Original Message-----
> From: Wood Scott-B07421
> Sent: Tuesday, October 29, 2013 10:00 AM
> To: Bhushan Bharat-R65777
> Cc: Wood Scott-B07421; Alex Williamson; Kim Phillips; Yoder Stuart-B08248;
> christoffer.dall@xxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> a.motakis@xxxxxxxxxxxxxxxxxxxxxx; agraf@xxxxxxx; Sethi Varun-B16395;
> peter.maydell@xxxxxxxxxx; santosh.shukla@xxxxxxxxxx; kvm@xxxxxxxxxxxxxxx;
> gregkh@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [PATCH 3/4] VFIO: pci: amend vfio-pci for explicit binding via
> sysfs only
> 
> On Mon, 2013-10-28 at 22:52 -0500, Bhushan Bharat-R65777 wrote:
> >
> > > -----Original Message-----
> > > From: Wood Scott-B07421
> > > Sent: Tuesday, October 29, 2013 9:11 AM
> > > To: Bhushan Bharat-R65777
> > > Cc: Wood Scott-B07421; Alex Williamson; Kim Phillips; Yoder
> > > Stuart-B08248; christoffer.dall@xxxxxxxxxx;
> > > linux-kernel@xxxxxxxxxxxxxxx; a.motakis@xxxxxxxxxxxxxxxxxxxxxx;
> > > agraf@xxxxxxx; Sethi Varun-B16395; peter.maydell@xxxxxxxxxx;
> > > santosh.shukla@xxxxxxxxxx; kvm@xxxxxxxxxxxxxxx;
> > > gregkh@xxxxxxxxxxxxxxxxxxx
> > > Subject: Re: [PATCH 3/4] VFIO: pci: amend vfio-pci for explicit
> > > binding via sysfs only
> > >
> > > On Mon, 2013-10-28 at 22:38 -0500, Bhushan Bharat-R65777 wrote:
> > > >
> > > > > -----Original Message-----
> > > > > From: Wood Scott-B07421
> > > > > Sent: Monday, October 28, 2013 11:40 PM
> > > > > To: Alex Williamson
> > > > > Cc: Kim Phillips; Bhushan Bharat-R65777; Wood Scott-B07421;
> > > > > Yoder Stuart-B08248; christoffer.dall@xxxxxxxxxx;
> > > > > linux-kernel@xxxxxxxxxxxxxxx; a.motakis@xxxxxxxxxxxxxxxxxxxxxx;
> > > > > agraf@xxxxxxx; Sethi Varun-B16395; peter.maydell@xxxxxxxxxx;
> > > > > santosh.shukla@xxxxxxxxxx; kvm@xxxxxxxxxxxxxxx;
> > > > > gregkh@xxxxxxxxxxxxxxxxxxx
> > > > > Subject: Re: [PATCH 3/4] VFIO: pci: amend vfio-pci for explicit
> > > > > binding via sysfs only
> > > > >
> > > > > On Mon, 2013-10-28 at 13:00 -0500, Scott Wood wrote:
> > > > > > On Mon, 2013-10-28 at 11:47 -0600, Alex Williamson wrote:
> > > > > > > On Fri, 2013-10-11 at 01:27 -0500, Kim Phillips wrote:
> > > > > > > > Force the vfio-pci driver to only be bound explicitly via
> > > > > > > > sysfs to avoid conflics with other drivers in the event of a
> hotplug.
> > > > > > >
> > > > > > > We can't break userspace, so we can't disable the current
> > > > > > > method of binding devices to vfio-pci.  We can add a new
> > > > > > > method and perhaps deprecate the existing mechanism to be
> > > > > > > removed at some point in the future.  Thanks,
> > > > > >
> > > > > > I thought the existing method involved using sysfs bind, and
> > > > > > this was just eliminating a race.  How does the bind get triggered
> currently?
> > > > >
> > > > > OK, so it seems it's relying on the write to new_id calling
> driver_attach().
> > > > > Sigh.  I guess we could make driver-sysfs-bind-only be settable
> > > > > via sysfs, and have new-userspace set both that and PCI_ANY_ID
> > > > > (or the specific ID if userspace
> > > > > prefers) via new_id.  The platform bus patches could continue as
> > > > > is, since there's no existing mechanism to break.
> > > >
> > > > What about changing the store_new_id() to bypass exact ids check
> > > > if driver
> > > have PCI_ANY_ID?
> > >
> > > I don't follow.
> >
> > store_new_id() function id defined as:
> >
> > static ssize_t store_new_id(struct device_driver *driver, const char
> > *buf, size_t count) {
> >         struct pci_driver *pdrv = to_pci_driver(driver);
> >         const struct pci_device_id *ids = pdrv->id_table;
> >
> > <snip>
> >         /* Only accept driver_data values that match an existing id_table
> >            entry */
> >         if (ids) {
> >                 retval = -EINVAL;
> >                 while (ids->vendor || ids->subvendor || ids->class_mask) {
> >                         if (driver_data == ids->driver_data) {
> >                                 retval = 0;
> >                                 break;
> >                         }
> >                         ids++;
> >                 }
> >                 if (retval)     /* No match */
> >                         return retval;
> >         }
> >
> >         retval = pci_add_dynid(pdrv, vendor, device, subvendor, subdevice,
> >                                class, class_mask, driver_data); <snip>
> >
> >
> > So when ids == NULL it does not check of vendor etc and calls pci_add_dynid()
> which in turn calls driver_attach().
> >
> > If we change the above loop to break if ids->vendor == PCI_ANY_ID && ids-
> >subvendor == PCI_ANY_ID then also we will call pci_add_dyids().
> 
> What problem are you trying to solve?

new_id interface to continue working as before.

-Bharat

> 
> -Scott
> 

N‹§²æìr¸›yúèšØb²X¬¶ÇvØ^–)Þ{.nÇ+‰·¥Š{±‘êçzX§¶›¡Ü}©ž²ÆzÚ&j:+v‰¨¾«‘êçzZ+€Ê+zf£¢·hšˆ§~†­†Ûiÿûàz¹®w¥¢¸?™¨è­Ú&¢)ßf”ù^jÇy§m…á@A«a¶Úÿ0¶ìh®å’i