Re: [PATCH 5/6] perf timechart: add support for -P and -T in timechart recording

[Namhyung Kim]

On Tue, 22 Oct 2013 14:56:51 +0400, Stanislav Fomichev wrote:
> If we don't want either power or task events we may use -T or -P
> with the `perf timechart record` command to filter out events while
> recording to keep perf.data small.
>
> Signed-off-by: Stanislav Fomichev <stfomichev@xxxxxxxxxxxxxx>
> ---
>  tools/perf/builtin-timechart.c | 98 +++++++++++++++++++++++++++++++-----------
>  1 file changed, 72 insertions(+), 26 deletions(-)
>
> diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c
> index 4d2ac96b75b1..54bdebea4c6b 100644
> --- a/tools/perf/builtin-timechart.c
> +++ b/tools/perf/builtin-timechart.c
> @@ -1031,50 +1031,81 @@ out_delete:
>  
>  static int __cmd_record(int argc, const char **argv)
>  {
> -#ifdef SUPPORT_OLD_POWER_EVENTS
> -	const char * const record_old_args[] = {
> +	unsigned int rec_argc, i, j;
> +	const char **rec_argv;
> +	const char **p;
> +	unsigned int record_elems;
> +
> +	const char * const common_args[] = {
>  		"record", "-a", "-R", "-c", "1",
> +	};
> +	unsigned int common_args_no = ARRAY_SIZE(common_args);

It's preferred to use "nr" in the position of "no".  Or we can use
'common_argc' instead.  Same goes to the below.

> +
> +	const char * const power_args[] = {
> +		"-e", "power:cpu_frequency",
> +		"-e", "power:cpu_idle",
> +	};
> +	unsigned int power_args_no = ARRAY_SIZE(power_args);
> +
> +	const char * const old_power_args[] = {
> +#ifdef SUPPORT_OLD_POWER_EVENTS
>  		"-e", "power:power_start",
>  		"-e", "power:power_end",
>  		"-e", "power:power_frequency",
> -		"-e", "sched:sched_wakeup",
> -		"-e", "sched:sched_switch",
> -	};
>  #endif
> -	const char * const record_new_args[] = {
> -		"record", "-a", "-R", "-c", "1",
> -		"-e", "power:cpu_frequency",
> -		"-e", "power:cpu_idle",
> +	};
> +	unsigned int old_power_args_no = ARRAY_SIZE(power_args);

It should be ARRAY_SIZE(old_power_args).


> +
> +	const char * const tasks_args[] = {
>  		"-e", "sched:sched_wakeup",
>  		"-e", "sched:sched_switch",
>  	};
> -	unsigned int rec_argc, i, j;
> -	const char **rec_argv;
> -	const char * const *record_args = record_new_args;
> -	unsigned int record_elems = ARRAY_SIZE(record_new_args);
> +	unsigned int tasks_args_no = ARRAY_SIZE(tasks_args);
>  
>  #ifdef SUPPORT_OLD_POWER_EVENTS
>  	if (!is_valid_tracepoint("power:cpu_idle") &&
>  	    is_valid_tracepoint("power:power_start")) {
>  		use_old_power_events = 1;
> -		record_args = record_old_args;
> -		record_elems = ARRAY_SIZE(record_old_args);
> +		power_args_no = 0;
> +	} else {
> +		old_power_args_no = 0;
>  	}
>  #endif
>  
> -	rec_argc = record_elems + argc - 1;
> +	if (!proc_num)
> +		tasks_args_no = 0;
> +
> +	if (no_power) {
> +		power_args_no = 0;
> +		old_power_args_no = 0;
> +	}
> +
> +	record_elems = common_args_no + tasks_args_no +
> +		power_args_no + old_power_args_no;
> +
> +	rec_argc = record_elems + argc;
>  	rec_argv = calloc(rec_argc + 1, sizeof(char *));
>  
>  	if (rec_argv == NULL)
>  		return -ENOMEM;
>  
> -	for (i = 0; i < record_elems; i++)
> -		rec_argv[i] = strdup(record_args[i]);
> +	p = rec_argv;
> +	for (i = 0; i < common_args_no; i++)
> +		*p++ = strdup(common_args[i]);
> +
> +	for (i = 0; i < tasks_args_no; i++)
> +		*p++ = strdup(tasks_args[i]);
> +
> +	for (i = 0; i < power_args_no; i++)
> +		*p++ = strdup(power_args[i]);
>  
> -	for (j = 1; j < (unsigned int)argc; j++, i++)
> -		rec_argv[i] = argv[j];
> +	for (i = 0; i < old_power_args_no; i++)
> +		*p++ = strdup(old_power_args[i]);
>  
> -	return cmd_record(i, rec_argv, NULL);
> +	for (j = 1; j < (unsigned int)argc; j++)
> +		*p++ = argv[j];
> +
> +	return cmd_record(rec_argc, rec_argv, NULL);
>  }
>  
>  static int
> @@ -1108,7 +1139,7 @@ int cmd_timechart(int argc, const char **argv,
>  		  const char *prefix __maybe_unused)
>  {
>  	const char *output_name = "output.svg";
> -	const struct option options[] = {
> +	const struct option timechart_options[] = {
>  	OPT_STRING('i', "input", &input_name, "file", "input file name"),
>  	OPT_STRING('o', "output", &output_name, "file", "output file name"),
>  	OPT_INTEGER('w', "width", &svg_page_width, "page width"),
> @@ -1130,15 +1161,30 @@ int cmd_timechart(int argc, const char **argv,
>  		NULL
>  	};
>  
> -	argc = parse_options(argc, argv, options, timechart_usage,
> +	const struct option record_options[] = {
> +	OPT_CALLBACK_NOOPT('P', "power-only", NULL, NULL,
> +		     "record power data only", parse_power),
> +	OPT_CALLBACK_NOOPT('T', "tasks-only", NULL, NULL,
> +		     "record processes data only", parse_tasks),
> +	OPT_END()
> +	};
> +	const char * const record_usage[] = {
> +		"perf timechart record [<options>]",
> +		NULL
> +	};

Do we really need to separate the option and usage for record?  AFAICS
it does exactly same thing..

Thanks,
Namhyung


> +	argc = parse_options(argc, argv, timechart_options, timechart_usage,
>  			PARSE_OPT_STOP_AT_NON_OPTION);
>  
>  	symbol__init();
>  
> -	if (argc && !strncmp(argv[0], "rec", 3))
> +	if (argc && !strncmp(argv[0], "rec", 3)) {
> +		argc = parse_options(argc, argv, record_options, record_usage,
> +				     PARSE_OPT_STOP_AT_NON_OPTION);
> +
>  		return __cmd_record(argc, argv);
> -	else if (argc)
> -		usage_with_options(timechart_usage, options);
> +	} else if (argc) {
> +		usage_with_options(timechart_usage, timechart_options);
> +	}
>  
>  	setup_pager();
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/