[PATCH v2 2/9] backlight: atmel-pwm-bl: fix gpio polarity in remove

[Johan Hovold]

Make sure to honour gpio polarity also at remove so that the backlight
is actually disabled on boards with active-low enable pin.

Cc: stable@xxxxxxxxxxxxxxx
Acked-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx>
---
 drivers/video/backlight/atmel-pwm-bl.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/video/backlight/atmel-pwm-bl.c b/drivers/video/backlight/atmel-pwm-bl.c
index 0971a8e..e21beb6 100644
--- a/drivers/video/backlight/atmel-pwm-bl.c
+++ b/drivers/video/backlight/atmel-pwm-bl.c
@@ -205,8 +205,10 @@ static int atmel_pwm_bl_remove(struct platform_device *pdev)
 {
 	struct atmel_pwm_bl *pwmbl = platform_get_drvdata(pdev);
 
-	if (pwmbl->gpio_on != -1)
-		gpio_set_value(pwmbl->gpio_on, 0);
+	if (pwmbl->gpio_on != -1) {
+		gpio_set_value(pwmbl->gpio_on,
+					0 ^ pwmbl->pdata->on_active_low);
+	}
 	pwm_channel_disable(&pwmbl->pwmc);
 	pwm_channel_free(&pwmbl->pwmc);
 
-- 
1.8.4.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/