[PATCH v4 0/4] Add dual-fifo mode support of i.MX ssi

From: Nicolin Chen
Date: Thu Oct 31 2013 - 09:45:46 EST


Changelog
v4:
* PATCH-3: Drop useless register configuration.
*
* Nothing changes for the other three patches
v3:
* PATCH-1: Add comments to indicate the end of v1 and v2 array.
* PATCH-3: Use better way to keep watermark as even number.
*
* Nothing changes for PATCH-2 and PATCH-4
v2:
* Instead of adding rogue scripts to current SDMA driver based on firmware
* V1, we define the new SDMA firmware as version 2 and bisect the PATCH-1
* to two patches: The first is to add version check code to the SDMA driver;
* And the second is to add SSI dual FIFO DMATYPE.
*
* Nothing changes for the last two patches.
v1:
* SSI can reduce hardware overrun/underrun possibility when using dual
* fifo mode. To support this mode, we need to first update sdma sciprt
* list, and then enable dual fifo BIT in SSI driver, and last update DT
* bindings of i.MX series.
*
* ! This series of patches has a direct dependency between them. When
* ! applying them, we need to apply to one single branch. Otherwise,
* ! it would break currect branches.

Nicolin Chen (4):
dma: imx-sdma: Add sdma firmware version 2 support
dma: imx-sdma: Add new dma type for ssi dual fifo script
ASoC: fsl_ssi: Add dual fifo mode support
ARM: dts: imx: use dual-fifo sdma script for ssi

.../devicetree/bindings/dma/fsl-imx-sdma.txt | 1 +
arch/arm/boot/dts/imx51.dtsi | 4 ++--
arch/arm/boot/dts/imx53.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl.dtsi | 12 ++++++------
arch/arm/boot/dts/imx6sl.dtsi | 12 ++++++------
drivers/dma/imx-sdma.c | 19 ++++++++++++++++++-
include/linux/platform_data/dma-imx-sdma.h | 5 +++++
include/linux/platform_data/dma-imx.h | 1 +
sound/soc/fsl/fsl_ssi.c | 18 +++++++++++++++++-
9 files changed, 58 insertions(+), 18 deletions(-)

--
1.8.4


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/