Re: [PATCHv2 5/8] ASoC: SGTL5000: Enhance the SGTL5000 codec driverabout regulator.

[Nicolin Chen]

On Fri, Nov 01, 2013 at 03:04:52PM +0800, Xiubo Li wrote:
> On VF610 series there are no regulators used, and now whether the
> CONFIG_REGULATOR mirco is enabled or not, for the VF610 audio

micro? or macro?

> patch series, the board cannot be probe successfully.
> And this patch will solve this issue.
> 

I finally got your idea about what this patch does. But it seems to
be more likely a work around. Maybe I here can't think it through
comprehensively, but I think you can try to add a fixed regulator to
sgtl5000 in the devicetree, rather than disabling common functions
even if not breaking others.

> Signed-off-by: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
> ---
>  sound/soc/codecs/sgtl5000.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
> index 1f4093f..c2f6d86 100644
> --- a/sound/soc/codecs/sgtl5000.c
> +++ b/sound/soc/codecs/sgtl5000.c
> @@ -61,6 +61,7 @@ static const struct reg_default sgtl5000_reg_defaults[] = {
>  	{ SGTL5000_DAP_AVC_DECAY,		0x0050 },
>  };
>  
> +#ifdef CONFIG_REGULATOR
>  /* regulator supplies for sgtl5000, VDDD is an optional external supply */
>  enum sgtl5000_regulator_supplies {
>  	VDDA,
> @@ -93,6 +94,9 @@ static struct regulator_init_data ldo_init_data = {
>  	.num_consumer_supplies = 1,
>  	.consumer_supplies = &ldo_consumer[0],
>  };
> +#else
> +#define SGTL5000_SUPPLY_NUM 0
> +#endif
>  
>  /*
>   * sgtl5000 internal ldo regulator,
> @@ -112,7 +116,9 @@ struct sgtl5000_priv {
>  	int master;	/* i2s master or not */
>  	int fmt;	/* i2s data format */
>  	struct regulator_bulk_data supplies[SGTL5000_SUPPLY_NUM];
> +#ifdef CONFIG_REGULATOR
>  	struct ldo_regulator *ldo;
> +#endif
>  	struct regmap *regmap;
>  	struct clk *mclk;
>  };
> @@ -879,6 +885,7 @@ static int ldo_regulator_remove(struct snd_soc_codec *codec)
>  	return 0;
>  }
>  #else
> +#ifndef CONFIG_SND_SOC_FSL_SGTL5000_VF610

Checking a platform or SoC specific define here is just a bit....

Could you pls find a better solution? Like I said at first, use fixed regulator
or figure out why your System would hang with current sgtl5000 driver. If it
really has a critical bug in its regulator-related code, I think you can then
make a greater contribution by fixing the bug rather than bypassing it.

Best regards,
Nicolin Chen

>  static int ldo_regulator_register(struct snd_soc_codec *codec,
>  				struct regulator_init_data *init_data,
>  				int voltage)
> @@ -886,6 +893,7 @@ static int ldo_regulator_register(struct snd_soc_codec *codec,
>  	dev_err(codec->dev, "this setup needs regulator support in the kernel\n");
>  	return -EINVAL;
>  }
> +#endif
>  
>  static int ldo_regulator_remove(struct snd_soc_codec *codec)
>  {
> @@ -1137,6 +1145,7 @@ static int sgtl5000_resume(struct snd_soc_codec *codec)
>  #define sgtl5000_resume  NULL
>  #endif	/* CONFIG_SUSPEND */
>  
> +#ifdef CONFIG_REGULATOR
>  /*
>   * sgtl5000 has 3 internal power supplies:
>   * 1. VAG, normally set to vdda/2
> @@ -1373,6 +1382,7 @@ err_regulator_free:
>  	return ret;
>  
>  }
> +#endif
>  
>  static int sgtl5000_probe(struct snd_soc_codec *codec)
>  {
> @@ -1387,6 +1397,7 @@ static int sgtl5000_probe(struct snd_soc_codec *codec)
>  		return ret;
>  	}
>  
> +#ifdef CONFIG_REGULATOR
>  	ret = sgtl5000_enable_regulators(codec);
>  	if (ret)
>  		return ret;
> @@ -1395,6 +1406,7 @@ static int sgtl5000_probe(struct snd_soc_codec *codec)
>  	ret = sgtl5000_set_power_regs(codec);
>  	if (ret)
>  		goto err;
> +#endif
>  
>  	/* enable small pop, introduce 400ms delay in turning off */
>  	snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
> -- 
> 1.8.4
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/