Re: [PATCH 1/4] ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support

[RafaÅ MiÅecki]

2013/11/1 RafaÅ MiÅecki <zajec5@xxxxxxxxx>:
> 2013/11/1 Anssi Hannula <anssi.hannula@xxxxxx>:
>> Strange. One other thing to check (in addition to trying fglrx) would be
>> to try 192kHz 8ch audio with a different (non-ATI/AMD) card altogether,
>> to see if this is a receiver issue.
>
> What about this:
> 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108
> [GeForce GT 540M] [10de:0df4] (rev a1)
> 01:00.1 Audio device [0403]: NVIDIA Corporation GF108 High Definition
> Audio Controller [10de:0bea] (rev a1)
> ? Chip & family:
> [    2.738343] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0c1a00a1
> [    2.738347] nouveau  [  DEVICE][0000:01:00.0] Chipset: GF108 (NVC1)
> [    2.738348] nouveau  [  DEVICE][0000:01:00.0] Family : NVC0
>
> (...)
>
> Unfortunately speaker-test fails :|
>
> linux@linux:~> speaker-test -D hdmi:CARD=NVidia,DEV=0 -c6 -r 48000 -F S16_LE
>
> speaker-test 1.0.26
>
> Playback device is hdmi:CARD=NVidia,DEV=0
> Stream parameters are 48000Hz, S16_LE, 6 channels
> Using 16 octaves of pink noise
> Rate set to 48000Hz (requested 48000Hz)
> Buffer size range from 64 to 87360
> Period size range from 32 to 43680
> Using max buffer size 87360
> Periods = 4
> was set period_size = 17472
> was set buffer_size = 87360
> *** Error in `speaker-test': corrupted double-linked list:
> 0x0000000000cc48a0 ***
> ^C

So I've decided to try mplayer. List of tested cases:

mplayer -ao alsa:device=hw=1.7 Canyon-5.1-48khz-448kbit.ac3 -channels
6 -srate 96000
mplayer -ao alsa:device=hw=1.7 Canyon-5.1-48khz-448kbit.ac3 -channels
6 -srate 176400
mplayer -ao alsa:device=hw=1.7 Canyon-5.1-48khz-448kbit.ac3 -channels
6 -srate 192000

mplayer -ao alsa:device=hw=1.7 Broadway-5.1-48khz-448kbit.ac3
-channels 6 -srate 96000
mplayer -ao alsa:device=hw=1.7 Broadway-5.1-48khz-448kbit.ac3
-channels 6 -srate 176400
mplayer -ao alsa:device=hw=1.7 Broadway-5.1-48khz-448kbit.ac3
-channels 6 -srate 192000

Rear right and real left were always working fine.
The rest (front  & center & front) were working for 96000 only.

So it seems to be some issue with my Onkyo TX-SR605 that reports
support for 192000 but can't fully handle it. Weird :|

-- 
RafaÅ
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/