[PATCH V3 6/7] ARM: OMAP4+: Correct Wakeup-gen code to use physical irq number

From: Sricharan R
Date: Tue Nov 05 2013 - 08:15:45 EST


The wakeup gen mask/unmask callback uses the irq element of the
irq_data to setup. The irq is the linux virtual irq number and
is same as the hardware irq number only when the parent irqchip
is setup as a legacy domain. When it is used as a linear domain,
the virtual irqs are allocated dynamically and wakeup gen code
cannot rely on these numbers to access the irq registers. Instead
use the hwirq element of the irq_data which represent the physical
irq number.

Cc: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
Cc: Rajendra Nayak <rnayak@xxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Sricharan R <r.sricharan@xxxxxx>
---
arch/arm/mach-omap2/omap-wakeupgen.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 813c615..b813f4b 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -134,7 +134,7 @@ static void wakeupgen_mask(struct irq_data *d)
unsigned long flags;

raw_spin_lock_irqsave(&wakeupgen_lock, flags);
- _wakeupgen_clear(d->irq, irq_target_cpu[d->irq]);
+ _wakeupgen_clear(d->hwirq, irq_target_cpu[d->hwirq]);
raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
}

@@ -146,7 +146,7 @@ static void wakeupgen_unmask(struct irq_data *d)
unsigned long flags;

raw_spin_lock_irqsave(&wakeupgen_lock, flags);
- _wakeupgen_set(d->irq, irq_target_cpu[d->irq]);
+ _wakeupgen_set(d->hwirq, irq_target_cpu[d->hwirq]);
raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
}

--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/