[PATCH V3 1/7] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs

[Sricharan R]

In some socs the gic can be preceded by a crossbar IP which
routes the peripheral interrupts to the gic inputs. The peripheral
interrupts are associated with a fixed crossbar input line and the
crossbar routes that to one of the free gic input line.

The DT entries for peripherals provides the fixed crossbar input line
as its interrupt number and the mapping code should associate this with
a free gic input line. This patch adds the support inside the gic irqchip
to handle such routable irqs. The routable irqs are registered in a linear
domain. The registered routable domain's callback should be implemented
to get a free irq and to configure the IP to route it.

Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
Cc: Rajendra Nayak <rnayak@xxxxxx>
Cc: Marc Zyngier <marc.zyngier@xxxxxxx>
Cc: Grant Likely <grant.likely@xxxxxxxxxx>
Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
Signed-off-by: Sricharan R <r.sricharan@xxxxxx>
---
 [V2] Added default routable-irqs functions to avoid
      unnecessary if checks as per Thomas Gleixner comments
      and renamed routable-irq binding as per
      Kumar Gala <galak@xxxxxxxxxxxxxx> comments.

 [V3] Addressed unnecessary warn-on and updated default
      xlate function as per Thomas Gleixner comments

 Documentation/devicetree/bindings/arm/gic.txt |    6 ++
 drivers/irqchip/irq-gic.c                     |   81 ++++++++++++++++++++++---
 include/linux/irqchip/arm-gic.h               |    8 ++-
 3 files changed, 84 insertions(+), 11 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index 3dfb0c0..5357745 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -49,6 +49,11 @@ Optional
   regions, used when the GIC doesn't have banked registers. The offset is
   cpu-offset * cpu-nr.
 
+- arm,routable-irqs : Total number of gic irq inputs which are not directly
+		  connected from the peripherals, but are routed dynamically
+		  by a crossbar/multiplexer preceding the GIC. The GIC irq
+		  input line is assigned dynamically when the corresponding
+		  peripheral's crossbar line is mapped.
 Example:
 
 	intc: interrupt-controller@fff11000 {
@@ -56,6 +61,7 @@ Example:
 		#interrupt-cells = <3>;
 		#address-cells = <1>;
 		interrupt-controller;
+		arm,routable-irqs = <160>;
 		reg = <0xfff11000 0x1000>,
 		      <0xfff10100 0x100>;
 	};
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index d0e9480..07be228 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -681,16 +681,25 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
 		irq_set_chip_and_handler(irq, &gic_chip,
 					 handle_fasteoi_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+
+		gic_routable_irq_domain_ops->map(d, irq, hw);
 	}
 	irq_set_chip_data(irq, d->host_data);
 	return 0;
 }
 
+static void gic_irq_domain_unmap(struct irq_domain *d, unsigned int irq)
+{
+	gic_routable_irq_domain_ops->unmap(d, irq);
+}
+
 static int gic_irq_domain_xlate(struct irq_domain *d,
 				struct device_node *controller,
 				const u32 *intspec, unsigned int intsize,
 				unsigned long *out_hwirq, unsigned int *out_type)
 {
+	unsigned long ret = 0;
+
 	if (d->of_node != controller)
 		return -EINVAL;
 	if (intsize < 3)
@@ -700,11 +709,20 @@ static int gic_irq_domain_xlate(struct irq_domain *d,
 	*out_hwirq = intspec[1] + 16;
 
 	/* For SPIs, we need to add 16 more to get the GIC irq ID number */
-	if (!intspec[0])
-		*out_hwirq += 16;
+	if (!intspec[0]) {
+		ret = gic_routable_irq_domain_ops->xlate(d, controller,
+							 intspec,
+							 intsize,
+							 out_hwirq,
+							 out_type);
+
+		if (IS_ERR_VALUE(ret))
+			return ret;
+	}
 
 	*out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
-	return 0;
+
+	return ret;
 }
 
 #ifdef CONFIG_SMP
@@ -728,9 +746,41 @@ static struct notifier_block gic_cpu_notifier = {
 
 const struct irq_domain_ops gic_irq_domain_ops = {
 	.map = gic_irq_domain_map,
+	.unmap = gic_irq_domain_unmap,
 	.xlate = gic_irq_domain_xlate,
 };
 
+/* Default functions for routable irq domain */
+static int gic_routable_irq_domain_map(struct irq_domain *d, unsigned int irq,
+			      irq_hw_number_t hw)
+{
+	return 0;
+}
+
+static void gic_routable_irq_domain_unmap(struct irq_domain *d,
+					  unsigned int irq)
+{
+}
+
+static int gic_routable_irq_domain_xlate(struct irq_domain *d,
+				struct device_node *controller,
+				const u32 *intspec, unsigned int intsize,
+				unsigned long *out_hwirq,
+				unsigned int *out_type)
+{
+	*out_hwirq += 16;
+	return 0;
+}
+
+const struct irq_domain_ops gic_default_routable_irq_domain_ops = {
+	.map = gic_routable_irq_domain_map,
+	.unmap = gic_routable_irq_domain_unmap,
+	.xlate = gic_routable_irq_domain_xlate,
+};
+
+const struct irq_domain_ops *gic_routable_irq_domain_ops =
+					&gic_default_routable_irq_domain_ops;
+
 void __init gic_init_bases(unsigned int gic_nr, int irq_start,
 			   void __iomem *dist_base, void __iomem *cpu_base,
 			   u32 percpu_offset, struct device_node *node)
@@ -738,6 +788,7 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
 	irq_hw_number_t hwirq_base;
 	struct gic_chip_data *gic;
 	int gic_irqs, irq_base, i;
+	int nr_routable_irqs;
 
 	BUG_ON(gic_nr >= MAX_GIC_NR);
 
@@ -803,14 +854,24 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
 	gic->gic_irqs = gic_irqs;
 
 	gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */
-	irq_base = irq_alloc_descs(irq_start, 16, gic_irqs, numa_node_id());
-	if (IS_ERR_VALUE(irq_base)) {
-		WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
-		     irq_start);
-		irq_base = irq_start;
+
+	if (of_property_read_u32(node, "arm,routable-irqs", &nr_routable_irqs)) {
+		irq_base = irq_alloc_descs(irq_start, 16, gic_irqs,
+					   numa_node_id());
+		if (IS_ERR_VALUE(irq_base)) {
+			WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
+			     irq_start);
+			irq_base = irq_start;
+		}
+
+		gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base,
+					hwirq_base, &gic_irq_domain_ops, gic);
+	} else {
+		gic->domain = irq_domain_add_linear(node, nr_routable_irqs,
+						    &gic_irq_domain_ops,
+						    gic);
 	}
-	gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base,
-				    hwirq_base, &gic_irq_domain_ops, gic);
+
 	if (WARN_ON(!gic->domain))
 		return;
 
diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h
index 0e5d9ec..c5f9529 100644
--- a/include/linux/irqchip/arm-gic.h
+++ b/include/linux/irqchip/arm-gic.h
@@ -74,6 +74,12 @@ static inline void gic_init(unsigned int nr, int start,
 	gic_init_bases(nr, start, dist, cpu, 0, NULL);
 }
 
-#endif /* __ASSEMBLY */
+extern const struct irq_domain_ops *gic_routable_irq_domain_ops;
+static inline void __init register_routable_domain_ops
+					(const struct irq_domain_ops *ops)
+{
+	gic_routable_irq_domain_ops = ops;
+}
 
+#endif /* __ASSEMBLY */
 #endif
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/